In this paper, the low-cost and practical adsorption for removing methylene blue (MB) dye has been developed by using recoverable natural zeolite that was magnetized with Fe3O4. The magnetization was conducted by co-precipitation technique. The adsorbents obtained from the magnetization were...

Adsorption is an effective and widely technique used for separation many pollutants from wastewater. Pollution of water with color material such as dyes is of environmental concern due to their toxicity and cause carcinogenic effects on human and aquatic life. These dyes are presented into the water...

The present communication attempts to explore the adsorption potential of Mixed Fruit Peel Waste (MFPW) to remove Sunset Yellow FCF dye from an aqueous solution. The MFPW is a low-cost adsorbent prepared from the peels orange, watermelon and banana. The characterization of MFPW was made through FTIR...

A facile strategy toward modification of aluminium filings (AF), a waste material from aluminium manufacturing industry, into a highly efficient adsorbent was examined. AF was simply treated with thermal modification to form a cheap adsorbent for Phosphorus (P) removal from aqueous solutions. The...

In this study the efficiency of crystal violet dye removal from aqueous solutions using lilac tree leaf powder as adsorbent material was tested. After adsorbent surface analysis by SEM and FTIR technics, the influence of six controllable factor on dye adsorption process was assesses using a L27...

The purpose of this research was to evaluate the effectiveness of low-cost adsorbents for the removal of MTBE by employing natural kaolin clay with surface modification by KOH. The feasibility of MTBE examination by High Pressure Liquid Chromatography (HPLC) in aqueous solution was investigated. To...

In this study, a batch adsorption process was conducted utilizing Ascophyllum Nodosum biosorbent as an organic adsorbent used for the elimination of heavy metal ions (specifically chromium, nickel, and zinc) from wastewater. To examine the surface morphology and functional groups, the biosorbent...

Clean water and its requirement are one of the emerging needs in recent days. Water pollution creates more amount of toxic nature to the clean water and it increases the accumulation of poisonous contaminants in the water sources. Heavy metal ions are the type of toxic pollutant released from...

The slag generated in the rotary furnaces is classified hazardous waste. In this regard, landfill disposal of lead smelting slag is not feasible since a few hundred tons are produced per year; leaching of heavy metals into ground water is of concern. The release of heavy metals into the environment...

The batch adsorption technique investigated the efficiency of sawdust adsorbent for removing copper ions from synthetic solutions. A chemical synthesis process prepared the activated sawdust powder, and its surface area and pore volume were obtained by BET isotherm analysis. The ability of copper...

In this study, raw boron enrichment waste was treated with hydrochloric acid and ultrasound at 35-kHz frequency for 60 minutes. To optimize the adsorption conditions for removal of methylene blue (MB) from synthetic wastewaters using raw boron enrichment waste (BEW), acid modified boron enrichment...

In this study, neem leaf biosorbent, prepared through chemical synthesis and activated with concentrated sulfuric acid, was utilized as an organic adsorbent for the removal of heavy metal ions, specifically arsenic (As) and chromium (Cr), from wastewater. The characteristics of the biosorbent were...

Batch adsorption studies of heavy metals were carried out using activated charcoal groundnut shell powder as an adsorbent material. The groundnut shell was collected and synthesized by chemical synthesis to convert it into charcoal form. The prepared adsorbent’s pore size & surface area was analyzed...

In this study, potential of okra leaves for the removal of Ni(II), Cu(II), Pb(II) and Cd(II) from the mixed metal aqueous solution were evaluated. The data were analyzed by Freundlich, Langmuir, D-R, Flory-Huggins and Halsey adsorption models. Pseudo first order rate, Pseudo second order rate...

The biosorption of uranium ions was explored through batch studies employing activated biochar derived from Gracilaria Edulis seaweeds. A chemical synthesis approach utilizing concentrated sulfuric acid created and activated the adsorbent material. SEM and FTIR measurements were used to characterize...

Biosorption of hexavalent chromium ions from the synthetic solution was performed using activated Ziziphus jujube seeds powder as an adsorbent material. A chemical synthesis process prepared the adsorbent, and various methods have evaluated its characteristics. FTIR, SEM and EDX analysis was...

Dinitrobutylphenol is a toxic and resistant pollutant that pollutes the environment by producing toxins and chemical wastewater. Present paper aims to study the efficiency of the magnetic particles of walnut hard shell ash as a cheap and bi-compatible adsorbent for the removable of DNBP from aqueous...