Adsorption is one of the methods that can be used for metal removal. In this study five metals were used cadmium, chromium, lead, copper and Nickel (Cd, Cr, Pb, Cu, and Ni) over a concentration range from 0.8 to about 7 mg l -1 for each metal. Adsorbents were prepared with increasing chitosan to...

The effect of Zeolux use as soil amendment on the yield and some of the agronomic traits of a home garden plant, Sage ( Salvia officinalis), irrigated by either fresh or RO reject waters was studied. Clay and different combinations of clay-Jordanian zeolux were compared for that purpose. Each...

Most of water sources throughout the world contain natural organic matter (NOM), which is the best description as a complex mixture of organic compounds. The effect of iron ion on removal efficiency of dissolved organic carbon (DOC) using UV/TiO 2 photo catalytic oxidation (TiO 2) was examined. In...

The treatment of oxytetracycline (OTC) in test solutions by ferrate (VI) was investigated aiming to propose the effects of pH, concentration of co-existing ions and humic acid on the OTC removal. Ferrate (VI) can remove 97% OTC (from 1000 µg·l -1) in 30 minutes under the optimal conditions with...

Agriculture wastes like sugarcane bagasse are available in large quantities in Egypt. Various adsorbents from natural materials, industrial waste materials, agricultural by-products, and biomass based activated carbon can be used in the removal of various dyes. Raw Bagasse pith (RBP) was used to...

MB decolarization with pure TiO 2 and Ag doped TiO 2 based photocatalytic system were investigated under UV-A and UV-Visible conditions. Different ratios of Ag were used as metal dopant. 1% Ag-TiO 2 increased the decolorization efficiencies of MB and MO dyes, also the k app constant enhanced under...

The main objective of this study was to investigate the differences between the main pollutants in young and intermediate age landfill leachate in terms of molecular weight distribution (MWD). Parameters of chemical oxygen demand (COD), five day - biochemical oxygen demand (BOD 5), ultraviolet...

This study investigated the treatability and changes in molecular weight distributions (MWD) of membrane concentrate. Nanofiltration (NF) concentrate from textile wastewater was subjected sole anaerobic treatment (R1) and pre-ozonation (R2) plus anaerobic treatment. BOD 5, COD and TOC, color...

The aim of the present study was to synthesize a sorbent, for arsenic removal from aqueous solutions, reusing two waste materials (slag and red mud). The sorbent was prepared after chemical and thermal treatment, during which amorphous silica sol and FeOOH sol were produced simultaneously and form...

In this study, the removal of cadmium by using pumice coated with iron nanoparticles (INPs) from synthetic wastewater was investigated. The effects of parameters influencing adsorption: contact time (10-20 min), pH (3-9), initial cadmium concentration (25-125 mg l -1) and adsorbent dose (2-10 g l -1...

Two pot experiments were carried out to investigate effect of deficit irrigation with wastewater on seed yield, heavy metals and seedling emergence in oat ( Avena sativa). The research at seedling stage included different ratios of sewage-contaminated water (100% well water, 75% well water + 25%...

A dynamic mathematical model, based on the biochemical kinetic processes dominated in shallow free water systems was developed following the Activated Sludge Model (ASM) methodology. The model predicts plant mass and water uptake rate, BOD 5 and total nitrogen (TN) removal on a year round basis...

This study is focused on degradation of Direct Black dye, a common azo dye, catalyzed by nickel hydroxide in aqueous solution. Nickel sulfatehexahydrate, sodium hydroxide and sodium hypochlorite were used for synthesis of nickel hydroxide catalyst. The catalytic performance of nickel hydroxide for...

10 mg l -1 and the permeate flux behavior during dead-end stirred-cell filtration system using six type of commercially available loose and tight NF membranes (NP010, NP030, NF90, NF270, CK3001 and DS-5DK). The rejection of CIPRO and permeate flux value were evaluated according to the effects of...

Ozone initiated oxidation of 2-chloro,4-bromophenol, (CBP) in aqueous system catalyzed by 1, 2.5 and 5% loadings of 1:1 molar ratio of Ce-Zr oxide on TiO 2 were studied. The synthesized catalysts were characterized via BET, ICP, PXRD, TPD, TEM, SEM, and FT-IR analysis. The powder XRD data revealed...

Production of potable water from most raw water sources usually uses the coagulation/flocculation process to remove turbidity. Alum is widely used as a coagulant. However, there is concern about its associated risk of Alzheimer disease. As a result, there has been considerable interest in the...

This paper reports on the fabrication, characterization and testing of iron oxide nanoparticles – powdered activated carbon (PAC) composites for water treatment and PAC regeneration by Fenton reactions. Different wet impregnation procedures and iron loadings were assessed in terms of organic...

The photocatalytic activity of Mn doped TiO 2 for the ozonation of tetradifon pesticide in aqueous solution was studied. Various loadings of catalysts Mn/TiO 2 (1%, 2.5% and 5%) was prepared and characterized by standard analytical techniques. Photocatalyzed ozonation with 2.5% Mn/TiO 2 yielded 100%...

Denitrifying polyphosphate accumulating organisms (DNPAOs) are very promising for simultaneous nitrogen and phosphorus removal. While during denitrification, emission of a greenhouse gas, nitrous oxide (N 2O), may occur. In this study, DNPAOs were enriched in a lab-scale reactor, and N 2O emission...

A high efficient nitrite based double-sludge system combining sequential denitrification and nitritation reactors has been developed to remove nitrogen from wastewaters containing high concentrations of ammonium. System performance was examined and also nitrous oxide (N 2O) emission was measured...