Atmospheric aerosols have been implicated in human health effects, visibility reduction in urban and regional areas, acidic deposition, and altering the earth’s radiation balance. A major goal of scientific research for the last fifteen years has been the development of the necessary models, using...

In this study, Kandira stone, extensively used as a cladding material for building stone has been examined for the removal of an antibiotic Ciprofloxacin hydrochloride (CIP) from its aqueous solution. Batch experiments were performed to investigate the adsorption kinetics, equilibrium and...

Clean water and its requirement are one of the emerging needs in recent days. Water pollution creates more amount of toxic nature to the clean water and it increases the accumulation of poisonous contaminants in the water sources. Heavy metal ions are the type of toxic pollutant released from...

Batch adsorption studies of heavy metals were carried out using activated charcoal groundnut shell powder as an adsorbent material. The groundnut shell was collected and synthesized by chemical synthesis to convert it into charcoal form. The prepared adsorbent’s pore size & surface area was analyzed...

The biosorption of Cr (III), Zn (II) and Ni (II) ions from aqueous solution by dead blue algal biomass (Cyanophyta) was investigated in single metal system and batch conditions. Experimental parameters included contact time (0-140 min), pH (2-8), sorbent dose (0.1-2.0 g), initial concentrations (10...

In this study, activated sugar beet pulp as a biosorbent was used to remove Red-254 dye from aqueous solutions. The contact time, pH, biosorbent dosage and temperature were chosen as the parameters affecting the biosorption process. In the experiments, the batch adsorption technique was used. The...

In the present study the sorption efficiency of okra leave sorbent for As(III) and As(V) is demonstrated. Sorption reaction is pH and time dependent. The sorbent shows maximum removal of As(III) and As(V) at pH 7 and pH 6 respectively and equilibrium was achieved at 180 minutes. In isotherm study...

In the present investigation, marine biomass (Posidonia Oceanica) (PO), in both its unmodified PO and basic-modified (Na-PO) forms, was studied for its possible utilisation as a cheap biosorbent for the retention of amoxicillin (AMX). Biosorption studies were carried out in a batch system and the...

Pollution of the environment with uranium and associated health effects to human have recently become of major concern, particularly due to the use of depleted uranium in armourbreaking bullets. Indeed, uranium in environmentally significant concentrations is found near to uranium mining and...

This study aimed to evaluate the sorption capability of an inexpensive and easily available Moroccan clay, called locally Ghassoul, to remove Rhodamine B (Rh-B) from aqueous solution. Experimental results showed that the equilibrium sorption data fitted well with the Langmuir isotherm and the...

In last decades the search for new low cost sorbents that have heavy metal ions binding capabilities is a hot topic in the field of clean-up technologies. In this study, wastes of Romanian silver tree ( Abies alba) bark were explored for first time as green and economical sorbent for the removal of...

This study focused on removing methylene blue (MB) from aqueous solutions using microalga Scenedesmus regularis as a biosorbent. The biomass was characterized by Fourier transform infrared spectroscopy (FT-IR) and field emission scanning electron microscopy (FE-SEM). The difference in thermal...

In the present study, fruits of Ceratonia siliqua L. (carobs) were used as an alternative low cost biosorbents to remove a cationic dye, methyl violet 2B (MV) which has broad applications in paints, textile and printing ink, from aqueous solutions. The untreated (CRM) and thermal treated carobs (CC)...

Adsorption of Cu (II) ions by untreated sugarcane bagasse (USCB) and treated sugarcane bagasse (TSCB) was investigated. Sugarcane bagasse was treated with 0.1M oxalic acid prior to TSCB adsorption studies. Dependence of Cu (II) adsorption on pH, contact time, temperature and initial concentration of...

In this study, a batch adsorption process was conducted utilizing Ascophyllum Nodosum biosorbent as an organic adsorbent used for the elimination of heavy metal ions (specifically chromium, nickel, and zinc) from wastewater. To examine the surface morphology and functional groups, the biosorbent...

This study presents the evaluation of a strong base (Purolite A200) and weak base (Purolite PFA847) polymeric anion exchange resins for nitrite removal. The different parameters on the removal of NO2– were investigated in batch sorption mode. Common isotherm models; Langmuir and Freundlich, were...

The batch adsorption technique investigated the efficiency of sawdust adsorbent for removing copper ions from synthetic solutions. A chemical synthesis process prepared the activated sawdust powder, and its surface area and pore volume were obtained by BET isotherm analysis. The ability of copper...

Clay of the Middle Atlas Mountains region, Morocco, was used to investigate the removal of heavy metals ions (Cadmium and Copper) from aqueous solutions with respect to several experimental conditions including pH, contact time, initial solute concentrations, temperature and ionic strength. Kinetic...

The majority of nitrate (NO3‾) pollutants come from a different type of industries. Even if present in low amounts, these nitrates are harmful to humans and aquatic systems. This research investigated the utilisation of Tamarind Fruit shell (TFS) as biosorbent in the removal of Nitrate from aqueous...

Hexavalent chromium Cr(VI) is one of the most toxic heavy metals in aqueous solutions, hence it is highly imperative to treat the wastewater containing Cr(VI) before its discharge. At present work, the rate of biosorption was studied under a variety of conditions, including initial Cr(VI)...

.In this work, biomass from Ligustrum lucidum fruits (LF) was used for the first time as a novel adsorbent to remove the Methylene Blue dye (MB) from aqueous solutions. The adsorption equilibrium was attained after 60 min, and the adsorption followed the pseudo-second-order kinetic model. The rise...