The mechanism of Methylene Blue adsorption on biosolid (waste sludge) has been studied through batch experiments. The effects of various experimental parameters, such as pH (3- 11), biosolid dosage (1-10 g l-1), contact time (5-1440 min) and initial dye concentration were investigated. The results...

Photocatalytic degradation for wastewater treatment is a method that has recently attracted attention. In this research, a synthesized composite of Fe3O4/SiO2/NiO with magnetic properties was used for the photocatalytic degradation of methylene blue dye under UV light. Furthermore, the composites...

Synthetic dyes have a hurtful effect on human health and the environment. In this work, activated carbon was produced from date stones for use in elimination of methylene blue charged in aqueous solutions. Before that, the adsorbent was characterized by BET method, SEM, X-ray and TGA. The results of...

Methylene blue is one of the most widely used dyes in various industries such as textiles and dyeing which, due to toxicity, causes several environmental problems as well as difficulties in wastewater treatment process. Therefore, many studies have been carried out on the removal of the dye from...

Cu 2O photocatalyst is synthesized by solvothermal method. Morphology and structure of Cu 2O photocatalyst are analyzed by SEM, XRD and N 2 sorption technique. The catalytic performances and reaction kinetics of Cu 2O photocatalyst for the degradation of methylene blue (MB) are investigated. The...

Composite based Ca/Al layered double hydroxide and biochar was prepared using mixing coprecipitation method at pH 10. Composite and the starting materials was characterized using X-ray, FTIR, BET, thermal, and SEM-EDX analyses. Furthermore, composite was used as adsorbent of methylene blue from...

.In this work, biomass from Ligustrum lucidum fruits (LF) was used for the first time as a novel adsorbent to remove the Methylene Blue dye (MB) from aqueous solutions. The adsorption equilibrium was attained after 60 min, and the adsorption followed the pseudo-second-order kinetic model. The rise...

In this paper, the low-cost and practical adsorption for removing methylene blue (MB) dye has been developed by using recoverable natural zeolite that was magnetized with Fe3O4. The magnetization was conducted by co-precipitation technique. The adsorbents obtained from the magnetization were...

The present study investigates the ability of formaldehyde treated Simarouba glauca seed shell powder for removal of methylene blue (MB) from aqueous solutions. Batch adsorption studies were carried out under various experimental conditions such as agitation time, dye concentration, adsorbent dose...

The purpose of the present work is to test the possibility of using the spent tea dust and raw coir pith for the removal of methylene blue (MB) from aqueous solution. The effects of the contact time, adsorbent dosage and solution pH were studied in batch experiments at 27 °C. Results showed that a...

The removal of dyes from colored effluents, particularly from textile industries, is one of the major environmental concerns these days. Current methods for removing dyes from wastewaters are costly and cannot effectively be used to treat wide range of such wastewaters. This work describes the use...

This study was conducted to remove Methylene Blue (MB) from aqueous solution using activated carbon prepared from N. microphyllum (AC-NM) as a new, cheap, and non-toxic. Design of experiments based on Response Surface Methodology (RSM) conducted to investigate the effect of variables namely; initial...

In this study, raw boron enrichment waste was treated with hydrochloric acid and ultrasound at 35-kHz frequency for 60 minutes. To optimize the adsorption conditions for removal of methylene blue (MB) from synthetic wastewaters using raw boron enrichment waste (BEW), acid modified boron enrichment...

Methylene blue (MB) removal from aqueous media using hybrid bioprocess: biosorption on modified cork powder (SDS-cork) and soluble turnip peroxidase (STP) was investigated. Cork powder was modified with sodium lauryl sulphate (SDS). Chemical composition of the biosorbent were characterized by...

Water hyacinth Eichhornia crassipes was found to have biosorption capacity for cationic dyes, malachite green and methylene blue from aqueous solutions. To evaluate the biosorption capacity and characteristics, the effect of solution pH, initial dye concentration, temperature, dose of biosorbent...

Low cost agricultural waste adsorbents can be viable alternatives to activated carbon for the treatment of contaminated wastewater. Sugarcane Bagasse, an abundant agriculture waste in Egypt, was used in the present study to prepare activated carbon. Batch adsorption experiments were conducted to...

One of the known methods for dye removing from waste water is using sorbent material for fine removal of dye .The nano- cation exchanger Sulphonated poly glycidyl methacrylate (SPGMA polymer) was used as sorbent material for removing one of the common cationic dyes. SPGMA polymer was prepared and...

Laboratory studies reported earlier, have shown very promising results in the selective removal of dyes from aqueous solutions by a commercially available (super absorbent polymer) SAP, Jalshakti® (JS). JS is mesoporous in nature and is a potential adsorbent for the basic dyes studied. This paper...

Biosorption is an emerging technique for water treatment utilizing abundantly available biomaterials.The potential feasibility of magnetic peanut hulls particle for removal of cationic dye (methylene blue) from aqueous solution was investigated. The effects of various experimental parameters were...

In this research, the Ag2CO3-PANI composite was synthesized with a simple precipitation method and then used as an effective adsorbent for adsorption of Methylene Blue cationic dyes from aqueous solution. Characterization of the adsorbent was carried out using UV–visible diffuse reflectance...

This study focused on removing methylene blue (MB) from aqueous solutions using microalga Scenedesmus regularis as a biosorbent. The biomass was characterized by Fourier transform infrared spectroscopy (FT-IR) and field emission scanning electron microscopy (FE-SEM). The difference in thermal...