The batch adsorption technique investigated the efficiency of sawdust adsorbent for removing copper ions from synthetic solutions. A chemical synthesis process prepared the activated sawdust powder, and its surface area and pore volume were obtained by BET isotherm analysis. The ability of copper...

Biosorption of hexavalent chromium ions from the synthetic solution was performed using activated Ziziphus jujube seeds powder as an adsorbent material. A chemical synthesis process prepared the adsorbent, and various methods have evaluated its characteristics. FTIR, SEM and EDX analysis was...

This study evaluated the effectiveness of solar Photo-Fenton’s technique (H2O2/Fe2+/Solar) to treat the refinery wastewater. The experimental data were analyzed using the first and second-order kinetic models. The results clearly indicated that the pseudo-second-order models gave better prediction...

Clean water and its requirement are one of the emerging needs in recent days. Water pollution creates more amount of toxic nature to the clean water and it increases the accumulation of poisonous contaminants in the water sources. Heavy metal ions are the type of toxic pollutant released from...

Biosorption of azo dyes (RO-16, RB-120 & RB-19) from the aqueous solutions was investigated using the activated sugarcane bagasse charcoal adsorbent. The characteristics of the prepared adsorbent were analyzed by SEM, EDX, FTIR, XRD, TG & DT analysis, and the BET surface area of the sugarcane...

The purpose of this research was to evaluate the effectiveness of low-cost adsorbents for the removal of MTBE by employing natural kaolin clay with surface modification by KOH. The feasibility of MTBE examination by High Pressure Liquid Chromatography (HPLC) in aqueous solution was investigated. To...

This study investigates the adsorption kinetics and removal conditions of copper by walnut tree sawdust from synthetic solutions in the batch and fixed bed reactors. The selected experimental parameters for the batch reactor were concentration, solution pH, adsorbent amount and temperature. The...

In this study, a batch adsorption process was conducted utilizing Ascophyllum Nodosum biosorbent as an organic adsorbent used for the elimination of heavy metal ions (specifically chromium, nickel, and zinc) from wastewater. To examine the surface morphology and functional groups, the biosorbent...

The objective of this study is to examine the ability of a compost material for removing {Cu}^{2+} from aqueous solutions with different parameters using continuous fixed-bed column. Compost was characterized by using Fourier transform infrared spectroscopy which revealed that the metal binding is...

The present study investigates the ability of formaldehyde treated Simarouba glauca seed shell powder for removal of methylene blue (MB) from aqueous solutions. Batch adsorption studies were carried out under various experimental conditions such as agitation time, dye concentration, adsorbent dose...

Clay of the Middle Atlas Mountains region, Morocco, was used to investigate the removal of heavy metals ions (Cadmium and Copper) from aqueous solutions with respect to several experimental conditions including pH, contact time, initial solute concentrations, temperature and ionic strength. Kinetic...

This research work has been focused in the study of gallinaceous feathers, a waste that may be valorised as sorbent, to remove the Dark Blue Astrazon 2RN (DBA) from Dystar. This study was focused on the following aspects: optimization of experimental conditions through factorial design methodology...

This study evaluates the pyrolysis of sewage sludge until 960 °C using heating rates between 3 K/min and 12 K/min in a macro TG/EGA. Mass and energy balances and kinetic parameters are determined. Thermal decomposition is divided into a low temperature zone (until 550 °C to 590 °C), for...

Adsorption of Cu (II) ions by untreated sugarcane bagasse (USCB) and treated sugarcane bagasse (TSCB) was investigated. Sugarcane bagasse was treated with 0.1M oxalic acid prior to TSCB adsorption studies. Dependence of Cu (II) adsorption on pH, contact time, temperature and initial concentration of...

This study presents an evaluation of diatomite as a low cost adsorbent for Pb (II) removal from aqueous solutions under various conditions. The results demonstrate that adsorption of Pb (II) is strongly dependent on the pH of the solution. The effect of pH on adsorption of Pb (II) on diatomite was...

The degradation of Remazol Black (RBB) by S-TiO2 photocatalyst was investigated. X-ray diffraction, fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and UV-vis specular reflectance spectroscopy has been used to characterize S-TiO2. The results...

The removal of Lead (II) from aqueous solutions using Fagopyrum esculentum Moench (Buckwheat) and Bambusa vulgaris (common bamboo) as adsorbents was investigated. The effects of various experimental parameters such as initial concentration, contact time and pH have been studied using batch...

This study aimed to evaluate the sorption capability of an inexpensive and easily available Moroccan clay, called locally Ghassoul, to remove Rhodamine B (Rh-B) from aqueous solution. Experimental results showed that the equilibrium sorption data fitted well with the Langmuir isotherm and the...

The adsorption of Basic yellow 2 (BY2), from aqueous solutions onto Granular activated carbon (GAC) and its adsorption kinetics at different concentrations, GAC masses, initial pH values and temperatures were studied. The adsorption process was followed by an on-line spectrophotometric analysis...

The textile industry has an important place in the environmental pollution due to its heavy water consumption and to the toxic content of dye. Every succeeding day, the water quality is deteriorated because the wastewater containing the dye is supplied to the receiving medium. In this study, The...

Adsorption of heavy metal ions (Cr, Pb & Zn) using prosopis julyflora roots has been investigated by batch adsorption and fixed bed column process. The various properties of adsorbent were analysed and the FT-IR spectra & SEM studies of prosopis julyflora powder, before and after adsorption of metal...

Kinetics for the biological processes of nitrification, denitrification and carbon oxidation were studied in the aerobic and anoxic phases of a pilot scale Biological Nutrient Removal (BNR) plant treating municipal wastewater. The configuration of the treating system is based on the combination of...

Mesophilic biomass and thermophilic biomass samples were isolated and used to remove Dorasyn Red dye from aqueous solutions. The biosorption kinetics of dye uptake by four different types of biomass at three temperatures (20, 30, and 40 °C) were investigated using pseudo-first order kinetics, pseudo...