In the present investigation, marine biomass (Posidonia Oceanica) (PO), in both its unmodified PO and basic-modified (Na-PO) forms, was studied for its possible utilisation as a cheap biosorbent for the retention of amoxicillin (AMX). Biosorption studies were carried out in a batch system and the...

Hexavalent chromium Cr(VI) is one of the most toxic heavy metals in aqueous solutions, hence it is highly imperative to treat the wastewater containing Cr(VI) before its discharge. At present work, the rate of biosorption was studied under a variety of conditions, including initial Cr(VI)...

In this study, the potential textile dye biosorption capacity of a low-cost biosorbent (P. animale) was tested as functions of pH, biosorbent type, initial dye concentration, temperature, contact time and biosorbent dosage at batch scale level. The optimal conditions are 2, dried biosorbent, 93.16...

Water hyacinth Eichhornia crassipes was found to have biosorption capacity for cationic dyes, malachite green and methylene blue from aqueous solutions. To evaluate the biosorption capacity and characteristics, the effect of solution pH, initial dye concentration, temperature, dose of biosorbent...

A wide range of technologies has been developed for the removal of dyes from wastewaters to decrease their environmental impact. Wastewater containing dyes is generally treated using more than one process such as adsorption/biosorption. In this study, effects of initial pH (2-8), initial azo dye...

The majority of nitrate (NO3‾) pollutants come from a different type of industries. Even if present in low amounts, these nitrates are harmful to humans and aquatic systems. This research investigated the utilisation of Tamarind Fruit shell (TFS) as biosorbent in the removal of Nitrate from aqueous...

The locally available tamarind fruit shells (TFS) pre-treated with 1N H3PO4 was used to remove the hexavalent chromium (Cr6+) from aqueous phase. The investigation was done by using continuously mixed batch reactor (CMBR) under room temperature. Few preliminary investigations was undertaken to...

Researchers have been focusing on protecting water quality and preventing environmental contamination caused by industrial discharge of heavy metals. Various methods have been explored for extracting these metals from wastewater, but they often prove to be costly and rely on non-renewable resources...

In this study, activated sugar beet pulp as a biosorbent was used to remove Red-254 dye from aqueous solutions. The contact time, pH, biosorbent dosage and temperature were chosen as the parameters affecting the biosorption process. In the experiments, the batch adsorption technique was used. The...

The reduction of highly toxic Cr (VI) from industrial wastewater of low concentration by different low-cost ample sorbent materials was investigated. In order to remove Cr (VI) from aqueous solutions, the biosorption properties of natural waste (Betel Seeds) were investigated with varying several...

Silver nanoparticles (GSNPs) were synthesized from extracellular metabolites of endophytic isolates of Fusarium verticillioides (KT587649) to evaluate their efficiency as new biosorbent agents for the exclusion of cadmium Cd (II) from aquatic systems. The GSNPs were characterized through X-ray...

The biosorption of Cr (III), Zn (II) and Ni (II) ions from aqueous solution by dead blue algal biomass (Cyanophyta) was investigated in single metal system and batch conditions. Experimental parameters included contact time (0-140 min), pH (2-8), sorbent dose (0.1-2.0 g), initial concentrations (10...

Biomining is the common term used to define processes that utilize biological systems to facilitate the extraction of metals from ores. Nowadays, a biomining concept can be defined as a two stage combined biological systems (1st stage bioleaching and 2nd stage biosorption) in order to perform the...

From this study, green seaweed Caulerpa Scalpelliformis is utilized as a sorbent for the removal of three metals such as lead (Pb), nickel (Ni) and zinc (Zn). Adsorption tests showed that maximum removal efficiency of 75.02% for Pb, 80% for Ni and 91.11% for Zn was obtained at an optimal equilibrium...

Hazardous metal chromium is used extensively in many different industrial processes and is commonly found in industrial effluents. Hazardous pollutants such inorganic anions, metal ions, synthetic xenobiotics, and others have contaminated ground and surface waters in India and other parts of the...

Methylene blue (MB) removal from aqueous media using hybrid bioprocess: biosorption on modified cork powder (SDS-cork) and soluble turnip peroxidase (STP) was investigated. Cork powder was modified with sodium lauryl sulphate (SDS). Chemical composition of the biosorbent were characterized by...

Sodium dodecyl sulfate sulfate modified Algerian cork powder (SDS-ACP) with interesting biosorption capacity was prepared for dye removal from aqueous media. The decolorization performance of SDS-ACP was studied using methylene blue (MB) as a model dye. Experiments were conducted in batch sysytem...

The main goal of this research study was the removal of Cu(II), Ni(II) and Zn(II) from aqueous solutions using peanut hulls. This work was mainly focused on the following aspects: chemical characterization of the biosorbent, kinetic studies, study of the pH influence in mono-component systems...

Clean water and its requirement are one of the emerging needs in recent days. Water pollution creates more amount of toxic nature to the clean water and it increases the accumulation of poisonous contaminants in the water sources. Heavy metal ions are the type of toxic pollutant released from...

Removal of Fe(II) and Mn(II) ions from aqueous solution by fungal biosorbent Aspergillus sp. TU-GM14immobilized on Detarium microcarpum matrix was investigated in this study. Effects of biosorption parameters pH, biosorbent concentration, bead size and equilibrium time on Fe(II) and Mn(II) ions...

In this study, neem leaf biosorbent, prepared through chemical synthesis and activated with concentrated sulfuric acid, was utilized as an organic adsorbent for the removal of heavy metal ions, specifically arsenic (As) and chromium (Cr), from wastewater. The characteristics of the biosorbent were...

.In this work, biomass from Ligustrum lucidum fruits (LF) was used for the first time as a novel adsorbent to remove the Methylene Blue dye (MB) from aqueous solutions. The adsorption equilibrium was attained after 60 min, and the adsorption followed the pseudo-second-order kinetic model. The rise...

Mesophilic biomass and thermophilic biomass samples were isolated and used to remove Dorasyn Red dye from aqueous solutions. The biosorption kinetics of dye uptake by four different types of biomass at three temperatures (20, 30, and 40 °C) were investigated using pseudo-first order kinetics, pseudo...