Simulations were performed of the 3-D hydrodynamic circulation and of the associated water quality behavior in Mornos Reservoir, under real environmental conditions, during the period 2003-2005. The water quality simulations, guided by observations taken at the contributing tributaries and at the...

It is difficult for decision-makers to evaluate the impact of their territorial policies. Aspects to be considered in this evaluation include those relating to humans, environment protection and industry development. Two reasons explain the difficulty: decision-makers cannot specialise in all...

In order to study the erodibility characteristics of some calcareous soils from Central Greece, the instability of aggregates of 2.0-4.7 mm in water was studied. Soil loss experiments were also conducted in the laboratory using a rain simulator where soil loss was measured and the soils’ attitude...

This paper analyzes the potential contribution of electric vehicles in greenhouse gas (GHG) emissions reduction over the next decade following a simulation procedure. Emissions were assessed through a stepwise methodological approach at the transportation link level in the Hamilton Census...

Accumulation of airborne pollutants in vegetation is an important initial step in the uptake process of the terrestrial food web, providing direct and indirect routes by which biota and, eventually, humans are exposed to chemicals. A set of algorithms for estimating atmospheric pollutant...

Numerical simulation was conducted to assess the impact of dust emission on typical environmental sites in Jinan City. The CALPUFF model was applied to five simulation scenarios. The results showed that dust emission had a significant impact on air quality in Jinan. The impact of dust emission on...

The Yellow River Basin is an important economic zone in China and an important base for energy, chemical, raw materials and basic industries. However, the sloppy development pattern of "high consumption and high pollution" in nine provinces along the Yellow River Basin has become an important...

Two different methodologies for hydraulic head simulation were compared in this study. The first methodology is a classic numerical groundwater flow simulation model, Princeton Transport Code (PTC), while the second one is a black-box approach that uses Artificial Neural Networks (ANNs). Both...

In order to design a network of drainage canals, it is essential to consider the excess water from the agricultural land (overland flow) and to evaluate the characteristics of flow routing, such as the flow depths and discharges in the system of tertiary and main drainage canals of various order. In...

A simulation is presented of the operation of brackish karst springs with the MODKARST deterministic mathematical model. Through this simulation, major issues regarding the operation mechanisms as well as the sustainable development of the springs are addressed and analyzed. The particular case...

The aim of this paper is to present in a useful and understandable way how climatic change could be interpreted for tourism and recreation. Future climate change conditions are analyzed using the Climate Version of the Local Model (CLM) based on the COSMO model, which is currently used – among other...

Three-dimensional calculations were performed to simulate the flow around a cylindrical vegetation element using the Scale Adaptive Simulation (SAS) model; commonly, this is the first step of the modeling of the flow through multiple vegetation elements. SAS solves the Reynolds Averaged Navier...

ADREA-HF, which is a Computational Fluid Dynamics (CFD) code, is utilised in order to numerically study the flow and concentration fields within a street-canyon area. The selected site is Runeberg Str., a typical urban street canyon with an aspect ratio of approximately 1:1 in Helsinki, Finland. The...

A Computational Fluid Dynamics (CFD) simulation using CFX, ANSYS 11.0, has been carried out using a multiphase flow model with an Eulerian-Eulerian approach for an airlift column photobioreactors (PBR). Transient simulations were performed for three inlet air flow, 2, 3 and 5 l/min. The contours for...

The importance of the development and application of groundwater simulation mathematical models in the protection of aquifer systems is nowadays recognised as an undisputable fact. In this paper a mathematical model that was developed in order to simulate the operation of the Upper Anthemountas...

The solar evaporative crystallization process at Lake Katwe was studied using brine evaporation rates, thermal, convection, and radiation energy losses as well as reported meteorological data around the salt lake basin. A simulation model of a salt pan was developed on a lumped basis to study its...

This paper presents the main achievements of a hydrometallurgical process to recover base and precious metals from waste printed circuit boards (WPCB). The technology comprises a first leaching process performed in a two-step counter current way with sulfuric acid and hydrogen peroxide for base...

This paper is focused on modelling the degradation of micropollutants by solar photo-Fenton at pilot plan scale. To this aim, a three pesticide mixture (acetamiprid, thiabendazole and imazalil, 100 μg l -1 each) was treated by photo-Fenton in simulated secondary effluent. The model covered a wide...

Groundwater is one of the major parameters in maintaining ecology in many regions. As climate is one of the main factors which affects groundwater resources, the main objective of the present study is to assess the impact of rainfall changes on the groundwater system by projecting the future changes...

Weibull Cumulative Distribution Function (C.D.F.) has been employed to assess and compare wind potentials of two wind stations Europlatform and Stavenisse of The Netherland. Weibull distribution has been used for accurate estimation of wind energy potential for a long time. The Weibull distribution...

The scope of this paper is the evaluation of wastewater reuse quality criteria and treatment specifications, appropriate to Greek conditions. The parameters that affect wastewater reuse criteria were taken into consideration, concerning among others reuse priorities, available treatment plants and...

Smoothed Particle Hydrodynamics (SPH) is a promising simulation technique in the family of Lagrangian mesh-free methods, especially for flows that undergo large deformations. Particle methods do not require a mesh (grid) for their implementation, in contrast to conventional Computational Fluid...

In the present study, the photocatalytic treatment of two synthetic textile dyehouse effluents was investigated. The first synthetic effluent (SE1) is a Remazol Black B aqueous solution, while the second one (SE2) is an aqueous mixture of sixteen dyes and auxiliary chemicals that are usually...