In this work, diesel soot has been characterized chemically using a diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) technique. Diesel soot samples were generated under combustion conditions reproducing the typical urban operating mode of a diesel engine. Initial experiments...

The United Arab Emirates (UAE) is one of the leading countries in the per capita bottled water consumption. This seems to be in controversy with adherences of local water authorities to stringent municipal water standards. A public survey (n= 891) was conducted to ascertain the perception of people...

This work employs the environmental methodology of Life Cycle Assessment (LCA) in compliance with ISO 14040 and uses software SimaPro® 7.3.2 to compare the environmental impact in process production of flat plate and evacuated tube solar collectors. In addition, an economic analysis was performed...

This study investigates the effect of different pre-treatments on the bio-ethanol production from the soluble compounds of the organic fraction of the municipal solid wastes (OFMSW). The experimental evaluation was performed on leachate samples obtained after mixing OFMSW with water during 10 d. The...

In this work, the stopping power due to free and bound electrons in a plasma target is analyzed for two different kinds of projectile, protons and alpha particles. The stopping of free electrons is calculated using the dielectric formalism, well described in previous literature. In the case of bound...

An unstandarised biodiesel made from Camelina sativa oil, having over a 90 percent by weight of unsaturated fatty acids, were transformed into an epoxidised biodiesel that satisfy the requirements for iodine value, linolenic acid methyl ester content, cetane number, polyunsaturated fatty acids...

Currently there is a big interest to increase the sources of alternative fuels for aviation to get a reduction of their carbon footprint and the deep energetic dependence from fossil fuels of different countries. Although there are studies about how to produce this alternative fuel and if it...

A set of experiments have been carried out in a heavy duty single cylinder engine using high EGR rates and different start of injection angles ( SOI). Three different fuels (conventional diesel fuel, a diesel-ethanol mixture (e-diesel) and a Fischer-Tropsch fuel (GTL)) have been tested in order to...

The aim of this work is to quantify the life-cycle emissions in terms of CO 2 equivalent grams per megajoule of biodiesel produced from Acrocomia totai, a native oily seed from Paraguay, according to Directive 2009/28/EC. The other key point is to calculate the amount of energy invested to get a...

In an effort to reduce the environmental impact on the landscape caused by the installation of photovoltaic farms, Spanish legislation requires the establishment of a hedge on the perimeter of each plot. The objective of the work described here was to increase our knowledge of the hedge species that...

The structure of the wind turbines nowadays is a critical element due to their importance from the reliability, availability, safety, and cost points of view. This is more relevant when the offshore wind turbine is considered. This paper introduces a novel design of a Fault Detection and Diagnosis...

The present work is about the techno-economic evaluation of a biodiesel industrial unit that exclusively use recycled edible oils as feedstock, for two alternative production technologies. Nowadays, many biodiesel production units use a mixture of virgin vegetable oils and waste cooking oils. The...