The aim of this work was to investigate an advanced oxidation process for removing malachite green from aqueous solutions using a modified Fenton-like process. An experimental Box-Behnken design was applied to determine the optimal conditions by examining the effects of catalyst concentration ([Fe 2...

Natural dyes, such as annatto, are widely used in the food and pharmaceutical industries. However, the effluents from annatto dye production pose environmental challenges due to the presence of residual dye components, organic matter, and dissolved inorganic species (chloride and sulfate). This...

Malachite green (MG) and Crystal Violet (CV) are used mainly as dyestuff and antimicrobials in aquaculture. They have a severe toxic effect on the environment. Several techniques were used to remove impurities from an aqueous solution: chemical, physical, and electrical. Among all these techniques...

In this study, zinc oxide (ZnO) films have been electrochemically deposited on stainless steel and its photocatalytic activity on the degradation of BR 18 dyes was tested. The effects of different electrodeposition conditions such as deposition potential and deposition time on the nanostructures of...

In current study environment benign silver-iron oxide (Ag-Fe2O3) nanohybrid structures are fabricated as catalyst for CR dye decolorization. Industrial wastewater stream possesses several toxic dyes which are toxic carcinogen pollutants cause severe environmental disorders. Detoxification of Congo...

This study investigated the removal of methylene blue (MB) via adsorption using waste bottom ash. The bottom ash, sourced from a waste storage site in the Çorlu district of Tekirdağ province, Thrace Region, was utilized as the adsorbent. The research examined the impact of several variables on MB...

The increasing prevalence of hazardous dye wastewater from the printing and packaging industries poses significant environmental and health challenges. Conventional water treatment technologies often fall short of effectively removing these complex contaminants. This study explores the formulation...

The increasing prevalence of hazardous dye wastewater from the printing and packaging industries poses significant environmental and health challenges. Conventional water treatment technologies often fall short of effectively removing these complex contaminants. This study explores the formulation...

This study examines the use of Co3O4 nanocomposite as a photo-catalyst in aqueous solution for photocatalytic degradation of dyes under UV. It has been observed that substrate concentrations, catalyst, pH, oxidant present and temperature, effect on dye degradation. The characterization of...

According to estimates, around 15-50% of textile dyes fail to adhere to the fabric during the dyeing process, resulting in their discharge into wastewater. This wastewater is often used for agricultural irrigation in impoverished nations which harms plant germination and development. In this study...

In this study, tamarind leaf extract was used to effectively produce silver oxide (AgO) nanoparticles. Crystal violet (CV), Alizarin red (AR), Reactive black (RB), and rhodamine b (Rh B) degradation were examined to evaluate the effectiveness of AgO NPs. XRD patterns, UV-visible spectroscopy...

Water contamination is a pressing global issue with far-reaching environmental, health, and socio-economic consequences. As the demand for clean water intensifies, researchers are exploring innovative nanomaterials to develop efficient and sustainable water treatment technologies. The Bismuth oxide...

The current work reveals the fabrication of a novel nanofiber composite membrane of PET-PAN modified with Mg-Al-LDH-PVA through electrospinning process. The nanocomposite membranes characterization was conducted with different techniques i.e. SEM, EDS, FTIR, XRD, and water contact angle to evaluate...

A novel technique involving hydrothermal synthesis was employed to prepare nanocomposite precursors of lamellar double hydroxide based basic mixed oxides. This method extended ongoing research on iron-impregnated hydrotalcite-supported nanomaterials. The iron-based Fe/MgAl-h nanocomposite was...

In response to the growing demand for eco-friendly and efficient catalysts in wastewater treatment, this study introduces a novel, biosynthesized silver nanoparticle (AgNP) using leaf extract from Lawsonia inermis, a widely available plant. We employed a unique concentration mixture of 0.015 mg/mL...

The proliferation of environmental pollution, particularly from hazardous industrial dyes, poses a significant threat to ecosystems and aquatic life. This study uses extract from Nerium oleander leaves as a natural capping and reducing agent to produce copper oxide nanoparticles (CuO NPs), an...

This study synthesizes selenium nanoparticles (Se NPs) using a green approach, utilizing Tectona grandis leaf extract in a hydrothermal method. The X-ray diffraction (XRD) analysis provided highly crystalline particles with a trigonal crystal structure, indicative of the well-defined nature of the...

The study aimed to analyze the adsorption behaviour of an activated rice husk biochar adsorbent in batch mode to expunge azo dye concentrations depletion from liquid solvents. The biochar adsorbent was formulated using different chemical synthesis processes, and its surface region was assessed using...

In this research, we provide a method for synthesizing ZnO nanoparticles using Moringa Oleifera Leaf (M.O Leaf) Extract. UV-VIS Spectroscopy, Scanning Electron Microscopy, EDS, X-ray diffraction and Fourier Transform Infrared Spectroscopy (FTIR) were used to create and characterize ZnO nanoparticles...

In this study, coconut shell biosorbent was synthesized through chemical processes and activated using concentrated sulfuric acid to serve as an organic adsorbent for the effective removal of dye molecules, particularly Crystal Violet (CV) and Methylene Blue (MB), from wastewater. The biosorbent's...

In this research, a simple method for the preparation of Fe3O4 nanoparticles (Fe3O4NPs) with an average size of 38.05 nm via co-precipitation was investigated. X-ray diffraction (DRX), scanning electron microscopy (SEM), and infrared spectroscopy (FT-IR) were used to characterize obtained Fe3O4...