Designed experiments are used to systematically examine the relationship between response variable and a set of experimental factors. In this study, 2 3 factorial design with center points was used to verify the selected experimental factors influence the removal efficiency and linearity assumption...

It is well known that chlorine and its compounds, traditionally utilized for water and wastewater disinfection, react with some organic matter to form undesirable by-products, hazardous to human health, known as Disinfection By-Products (DBPs). In many countries very stringent limits for...

This study investigates the effect of different pre-treatments on the bio-ethanol production from the soluble compounds of the organic fraction of the municipal solid wastes (OFMSW). The experimental evaluation was performed on leachate samples obtained after mixing OFMSW with water during 10 d. The...

In this work, three samples of nitrogen-doped TiO 2 prepared at different calcination temperatures (400, 450 and 500 °C) were applied for the adsorption of Direct Black 38. Kinetic studies about the adsorption of Direct Black 38 on nitrogen-doped TiO 2 were performed under different initial dye...

The natural regeneration of Scots pine stands at the Sarakatsana location in the Pieria Mountains improved considerably after the removal of the dense ground vegetation followed mechanical soil scarification. The experimental design consisted of replications on scarified and non-scarified soil. The...

Advanced oxidation processes (AOPs) have led the way in the treatment of aqueous waste and are rapidly becoming the chosen technology for many applications. In this paper, COD reduction of textile industry wastewater by electro-Fenton (EF) oxidation, was studied at batch experimental conditions. The...

In the present study, batch adsorption studies were performed for the removal of malachite green and acid blue 161 dyes from aqueous solutions by varying parameters such as contact time, waste marble dust amount, initial dye concentration and temperature. The equilibrium adsorption data were...

The objective of this study is to elucidate the efficiency of electrosorption on desalination of aqueous NaClsolution using nano-structured carbon aerogel electrodes. The experiments were performed in an electrosorption cell consisting of a pair of carbon aerogel sheets separated by a 0.5cm spacer...

Removal of Fe(II) and Mn(II) ions from aqueous solution by fungal biosorbent Aspergillus sp. TU-GM14immobilized on Detarium microcarpum matrix was investigated in this study. Effects of biosorption parameters pH, biosorbent concentration, bead size and equilibrium time on Fe(II) and Mn(II) ions...

This paper presents an experimental application of PID control to study the electrocoagulation process of textile wastewater. The addition of NaCl solution would also lead to the decrease in power consumption because of the increase in conductivity. Conductivity in electrocoagulation process is...

In this study, a four-factor five-level Central Composite Design (CCD) was applied to develop mathematical model and optimize process parameters for malachite green dye (MG) removal from aqueous solutions using sepiolite. The individual, combined, and quadratic effects of four experimental factors...

The removal of mercury by adsorption process using fly ash was investigated in this study. Mercury removal capacity of fly ash was performed by batch mode adsorption experiment with the effect of various parameters i.e., contact time (0.5-3.5) h, pH of 2-10, concentration of adsorbate (1, 5 and 10)...

The production of bio-pellets is an alternative to add value to the residual biomass of the oil palm-extraction process. In this work, an experimental study of the pelletising process of oil palm residual biomass blends is presented. An experimental full factorial design that uses as factors the...

Presence of antibiotics in the environment specially in aqueous environments is considered a major warning about health and environment. Thus, this study aims the efficiency of coupled process of Activated Carbon (AC) prepared from mango seed+ZnO under UV irradiation as an advanced oxidation process...

When flushing carry out as pressure condition, a scour cone is performed around the outlet. As the flow around the outlet in the pressure flushing is three dimensional, therefore that it is difficult to establish a general empirical model to provide accurate estimation for scour cone volume and...

Investigation of open channel flows is very important for a wide range of applications, including restoration and enhancement of river aquatic systems. As a result, the scientific community has focused on providing further insights on the flow characteristics in vegetated channels. Vegetation may be...

One of the issues that have recently attracted increased attention from the hydrologic community is the impact of forest fires on the hydrological response of the once vegetated areas. This study presents the investigation of wildfires impact on the hydrological response of the small scale...

The aim of this study was to assess the feasibility of co-digesting lipids originated from domestic wastewater along with sewage sludge. Three lab-scale single stage mesophilic anaerobic digesters were operated under a constant hydraulic retention time (15 days). One system (C) was fed on a daily...

In the present work, premixed flames from the combustion of producer gas have been analyzed. Two different compositions have been tested, corresponding to air and steam gasification processes (the latter leading to a better quality gas due to its higher CO and H2 concentration and its lower N2...

An experimental investigation was carried out to compare the compressive strength of zero slump and high slump concrete with high volume fly ash. 40% to 70% replacements of OPC (by weight) with class F fly ash have been incorporated. Superplasticizer was added at 1% of binder (cement + fly ash) to...

This study aimed to evaluate the sorption capability of an inexpensive and easily available Moroccan clay, called locally Ghassoul, to remove Rhodamine B (Rh-B) from aqueous solution. Experimental results showed that the equilibrium sorption data fitted well with the Langmuir isotherm and the...

In this study, the removal of a cationic dye, basic red 18, used in the textile industry with montmorillonite was investigated as a function of initial dye concentration, pH, agitation speed, adsorbent dosage, ionic strength, and temperature. Adsorption process was attained to the equilibrium within...

This study investigates inert COD levels and toxicity of two different commonly applied textile dye auxiliaries, namely two tannin formulations (Tannin 1: a condensation product of aryl sulphonate; Tannin 2: a sulfonated phenol polymer). The experimental evaluation is performed on samples obtained...

The aim of this study, which took place in a dental environment located at the centre of Athens, Greece, is to quantify the amount of Total Volatile Compounds (TVOCs), which were emitted from commonly used dental substances in a controlled dental micro-environment (8 surface disinfectants including...

In this study, the effects of seepage flow in the swash zone on beach profile evolution under the wave action are examined numerically. The seepage flow is induced artificially by a porous drain pipe buried beneath swash zone parallel to the coastline. The system includes minimal environmental...