The Global NEST Journal is an open access journal that publishes original research articles, short papers and critical reviews on all aspects of Environmental Science and Technology. These comprise, but are not limited to, Pollution Control Technology, Global Environmental Change, Air Quality, Water Quality, Water and Waste Water Treatment, Solid Waste Management, Hazardous Substances and Risk...Read full aims and scope
Pillared clay-based catalysts for treatment of 4-nitrophenol solutions by catalytic wet peroxide oxidation
Advanced Oxidation Processes for Wastewater treatment
The constant development of technological processes aggravates the problem of pollution, due to a significant change in the composition of effluents, which makes necessary new (and/or improved) treatment methods and catalytic materials. In this sense, the use of natural clays in the synthesis of low...
Al (III) removal from wastewaters by natural clay and coconut shell
CEST2017 - Heavy metals in the environment
This paper describes the adsorption of Al3+ ions from aqueous solutions, by natural clay (from Sakarya's Yenigün district) and coconut shell modified by means of acid treatment. Batch experiments were carried out to determine the effect of various factors such as initial pH (4-9), temperature (20...
Adsorption of cadmium and copper onto natural clay: isotherm, kinetic and thermodynamic studies
Water and Wastewater Treatment
Clay of the Middle Atlas Mountains region, Morocco, was used to investigate the removal of heavy metals ions (Cadmium and Copper) from aqueous solutions with respect to several experimental conditions including pH, contact time, initial solute concentrations, temperature and ionic strength. Kinetic...
Nanocrystalline TiO2 and Halloysite clay mineral composite films prepared by sol-gel method: Synergistic effect and the case of silver modification to the photocatalytic degradation of Basic Blue- 41 azo dye in water.
Advanced Oxidation Processes
Tubular halloysite clay mineral and nanocrystalline TiO 2 were incorporated in the preparation of nanocomposite films on glass substrates via sol-gel method at 450ºC. The synthesis involves a simple chemical method employing nonionic surfactant molecule as pore directing agent along with the acetic...
Equilibrium, thermodynamic and kinetic studies to study the sorption of rhodamine-b by moroccan clay
General
This study aimed to evaluate the sorption capability of an inexpensive and easily available Moroccan clay, called locally Ghassoul, to remove Rhodamine B (Rh-B) from aqueous solution. Experimental results showed that the equilibrium sorption data fitted well with the Langmuir isotherm and the...
Electrokinetic remediation of arsenic contamination from alluvial and red clay soil
Soil and groundwater contamination and remediation
In this research the arsenic contaminations issues are exposed and suitable measures are recommended through electrokinetic remediation. The arsenic expulsion was assessed using the electro kinetic remediation from two different soil tests; alluvial clay soil and red clay soil taken from the...
Heavy-metal uptake by a high cation-exchange-capacity montmorillonite: the role of permanent charge sites
General
A High Cation Exchange Capacity (HCM) montmorillonite clay has been prepared by acetate treatment of Zenith clay. The HCM has been evaluated for metal-uptake from aqueous solutions. The present data show that the cation exchange sites can play a significant role in the adsorption of metals in...
Spatial prediction of two soil properties using topographic information
General
The objective of this study was to determine whether the use of the co-regionalization of the distanceto- river topographic variable with the soil properties topsoil clay and sand can improve their mapping. The interpolation techniques: ordinary kriging, kriging combined with regression (two models)...
Use of waste glass powder in improving the properties of expansive clay soils
Solid Waste Management
Expansive soils pose a danger to the foundations of engineering structures due to their poor engineering properties. These soils are usually treated using mechanical techniques, and chemical stabilizers. However, the production of these chemicals is not friendly to the environment, thus a need to...
Utilization of cement power plant beds for aerated concrete thermal blocks
Water treatment
Nowadays cement industry power plant bed wastes can be used to create aerated concrete blocks for widespread usage in the construction sector instead of sand. The optimum materials for building enclosures for a variety of uses include aerated concretes. To enhance the physical and mechanical...
Heavy metal migration along a rural highway route: Ilesha-Akure roadside oil, Southwestern, Nigeria
General
This paper present migration of some selected heavy metal (zinc, lead, copper, chromium and nickel) of roadside soil samples from along Ilesa-Akure highway with a view to assess the degree of contamination such soils contain and the likelihood that this contamination can be remobilized. Soil samples...
Exploratory study to assess the impact of chitosan /bentonite ratio on the metal removal capacity of chitosan modified bentonite clay
Wastewater treatment
Adsorption is one of the methods that can be used for metal removal. In this study five metals were used cadmium, chromium, lead, copper and Nickel (Cd, Cr, Pb, Cu, and Ni) over a concentration range from 0.8 to about 7 mg l -1 for each metal. Adsorbents were prepared with increasing chitosan to...
Effect of Zeolux use on Sage (Salvia officinalis) plant irrigated by fresh and Ro reject waters
Water and Wastewater Treatment
The effect of Zeolux use as soil amendment on the yield and some of the agronomic traits of a home garden plant, Sage ( Salvia officinalis), irrigated by either fresh or RO reject waters was studied. Clay and different combinations of clay-Jordanian zeolux were compared for that purpose. Each...
Removal of cationic dye (basic red 18) from aqueous solution using natural turkish clay
General
In this study, the removal of a cationic dye, basic red 18, used in the textile industry with montmorillonite was investigated as a function of initial dye concentration, pH, agitation speed, adsorbent dosage, ionic strength, and temperature. Adsorption process was attained to the equilibrium within...
Assessment of Saturated Hydraulic Conductivity with Using Soil Particle Size Distribution: A Comparative Study of Constant Head and Falling Head Methods
Floods, Droughts and Water scarcity
The purpose of soil hydraulic conductivity is to retain soil water contents, and soil water pressure. In this study investigates two different methods to understand the soil hydraulic conductivity of loam and clay soils. The present research conducted a laboratory experiment to measure the saturated...
Effect of Zeolux and Filters Backwash Water (FBWW) on Plant Growth and Yield of Sage (Salvia Officinalis) Plant
Water and wastewater reuse
Jordan is one of the few countries with constricted water resources, having one of the lowest per capita water levels in the world (Ministry of Agriculture, 2015). Jordan's available water resources per person are predicted to fall from less than 160 m3/capita/year to roughly 90 m3/capita/year by...
Development of sustainable masonry solid blocks by the incorporation of industrial and agro waste.
Solid Waste Management
Bricks have been extensively adopted for centuries and continue to play a vital role in the construction industry. Nevertheless of its dependable workability and accessibility, fired clay brick production has been recognized for its comparatively high energy and resource requirements. Traditional...
Stabilization pond systems for wastewater treatment: Facility costs and environmental footprint assessment
Water and Wastewater Treatment
Natural systems offer an economic solution for the treatment of wastewater from small settlements. This study presents a detailed technical analysis of three stabilization pond systems designed to treat municipal wastewater, varying in capacity from 250 to 1400 population equivalent. Construction...
MTBE adsorption on surface modified adsorbent Kaolin-KOH – A study on Kinetic equilibrium and surface morphology
Water and Wastewater Treatment
The purpose of this research was to evaluate the effectiveness of low-cost adsorbents for the removal of MTBE by employing natural kaolin clay with surface modification by KOH. The feasibility of MTBE examination by High Pressure Liquid Chromatography (HPLC) in aqueous solution was investigated. To...
Laboratory Evaluation of Ash materials as Acid-Disturbed Land Amendments
General
Fly ash (FA) and fluidized bed ash (FBA) solutions were evaluated as amendments for acid-disturbed lands, more specifically for treating acidic and metal contaminated soil. While titrating the ash materials with different volumes of acid, pH changes were monitored as a function of time and the acid...
Assessing the Suitability of sites for Reclaimed Water Recharge using Hydrogeophysical and Hydrochemical Analysis
Water Quality
An electrical resistivity survey was carried out in the premises of Chennai Metrowater Sewage treatment plants and Anna University to assess the suitability of underlying aquifer for reclaimed water recharge and also to understand groundwater conditions. The geo-electrical methods used in the survey...
A rainfall simulation study of erosion of some calcareous soils
General
In order to study the erodibility characteristics of some calcareous soils from Central Greece, the instability of aggregates of 2.0-4.7 mm in water was studied. Soil loss experiments were also conducted in the laboratory using a rain simulator where soil loss was measured and the soils attitude...
Protection of environment by the use of fly ash in road construction
General
Fly ash is an important industrial by-product that comes from the combustion of coal, for the production of electrical energy. In our country, only a small percentage is used for the construction of technical projects, while the rest is stockpiled, causing serious problems. Because of its great...
Nitrate pollution in the coastal aquifer system of the Korinthos Prefecture (Greece)
General
Over the last decades intensified agricultural production is applied in the northern coastal part of Korinthos Prefecture (Peloponnese, Greece). An aquifer system occurs in the recent basin deposits, which consists of unconsolidated material, namely sands, pebbles and fine clay to silty sand...
Molybdenum in forests-A short review
This review deals with the importance of molybdenum (Mo) in nitrogen fixation in forests as well as the distribution of Mo in the various components of a forest ecosystems and its cycling. With regard to nitrogen (N) fixation in tropical forests, the limiting factor is the availability of phosphorus...
Thematic areas
Circular economy
Climate change and air pollution
Solid waste management
Water and wastewater
Climatic Influence on Solar Saltpans with specific reference to Thoothukudi District
Climate change mitigation...
24-07-2024
Analysis of the performance, combustion and emission of Hydrogen Induction in a CRDI engine
Climate change mitigation...
24-07-2024
Do Technological Innovation and Environmental Regulation Reduce Carbon Dioxide Emissions? Evidence from China
Ecology, environmental change...
24-07-2024
Strength and Durability Studies on Concrete using Cashew Nut Shell Ash (CNSA) waste as Supplementary Materials
Solid Waste Management
17-07-2024
Research on Regional Carbon Emission Policy and Breakthrough Green Technology Innovation Pathways: Based on the Perspective of New Quality Productivity
Ecology, environmental change...
17-07-2024
Phytogenic aqueous extract mediated fabrication of Ag-Fe2O3 nanohybrids for detoxification of carcinogenic Congo Red dye: An Environmental Remediation approach
Water treatment
17-07-2024
Anthropogenic Influence and Climate Change on Water and Nutrient Dynamics in the Kebir-Rhumel Basin, (Northeastern Algeria)
Water Quality
15-07-2024
Green Synthesis of Silver based Nanocomposites using Indigenous Plant Waste and their Lab Scale Application for Targeted Environmental Remediation
Biowaste
15-07-2024
A Review of Life Cycle Assessment of Nanomaterials-Based Adsorbent for Environmental Remediation
Life cycle analysis...
15-07-2024
Numerical and experimental analyses for performance and emissions assessment of a four-stroke engine powered by oleic acid methyl ester biofuel made from waste frying oil
Sustainable Energy
22-08-2024
Enhancing seafood processing wastewater treament efficiency of an anaerobic membrane bioreactor (AnMBR) system: a comparision of post-treatment methods
Water and Wastewater...
22-08-2024
Experimental study on effective utilization of industrial solid wastes in developing Ultra-High Performance Geopolymer Concrete
Circular economy
17-08-2024
Strength Properties Evaluation of Composite Blocks Incorporated With Acacia Nilotica Ash
Solid Waste Management
17-08-2024
AN OVERVIEW OF GREEN ENERGY SOURCES, ENHANCING THE ENVIRONMENTAL AND ECONOMIC ELEMENTS OF THE WORLD'S SUSTAINABILITY
Sustainable Energy
17-08-2024
Analysis of the effect of digital financial inclusion on agricultural carbon emissions in China
Ecology, environmental change...
17-08-2024
Development of an Air Quality Forecasting System Using a Multimodal Deep Learning Framework Based on Satellite Images of Delhi City
Air Quality
17-08-2024
An Experimental Assessment of the Performance of Solar Panels Using Efficiency Enhancement Techniques in India's Tropical Region
Sustainable Energy
10-08-2024
The Bioremoval of Toxic Dyes Using Chlorella Algae in Airlift Bioreactor
Water treatment
10-08-2024