The locally available tamarind fruit shells (TFS) pre-treated with 1N H3PO4 was used to remove the hexavalent chromium (Cr6+) from aqueous phase. The investigation was done by using continuously mixed batch reactor (CMBR) under room temperature. Few preliminary investigations was undertaken to...

Biosorption of hexavalent chromium ions from the synthetic solution was performed using activated Ziziphus jujube seeds powder as an adsorbent material. A chemical synthesis process prepared the adsorbent, and various methods have evaluated its characteristics. FTIR, SEM and EDX analysis was...

In the present study, fruits of Ceratonia siliqua L. (carobs) were used as an alternative low cost biosorbents to remove a cationic dye, methyl violet 2B (MV) which has broad applications in paints, textile and printing ink, from aqueous solutions. The untreated (CRM) and thermal treated carobs (CC)...

Biosorption of azo dyes (RO-16, RB-120 & RB-19) from the aqueous solutions was investigated using the activated sugarcane bagasse charcoal adsorbent. The characteristics of the prepared adsorbent were analyzed by SEM, EDX, FTIR, XRD, TG & DT analysis, and the BET surface area of the sugarcane...

In this study, Chlorella vulgaris microalgae was cultivated from wastewater and converted into biochar through hydrothermal carbonization process. Acclimatization of microalgae resulted in a greater biomass yield of 4.1 g/L in 15 days in a Fog's medium to wastewater ratio of 20:80. Microalgae...

This study focused on removing methylene blue (MB) from aqueous solutions using microalga Scenedesmus regularis as a biosorbent. The biomass was characterized by Fourier transform infrared spectroscopy (FT-IR) and field emission scanning electron microscopy (FE-SEM). The difference in thermal...

Biochar was synthesized from Kappaphycus alvarezii reject (KR) remove the anionic azo dye, Acid Red 88 from wastewater. In this study, biochar was experimented in both batch and column adsorption studies. Batch adsorption studies were performed at varying temperature (25 – 40 °C), dosage (1 – 10 g)...

Adsorption of heavy metal ions (Cr, Pb & Zn) using prosopis julyflora roots has been investigated by batch adsorption and fixed bed column process. The various properties of adsorbent were analysed and the FT-IR spectra & SEM studies of prosopis julyflora powder, before and after adsorption of metal...

In this study the efficiency of crystal violet dye removal from aqueous solutions using lilac tree leaf powder as adsorbent material was tested. After adsorbent surface analysis by SEM and FTIR technics, the influence of six controllable factor on dye adsorption process was assesses using a L27...

Silver nanoparticles (GSNPs) were synthesized from extracellular metabolites of endophytic isolates of Fusarium verticillioides (KT587649) to evaluate their efficiency as new biosorbent agents for the exclusion of cadmium Cd (II) from aquatic systems. The GSNPs were characterized through X-ray...

Batch adsorption experiments have been conducted to investigate the adsorption properties of the calcined sugar scum powder for methylene blue (MB) and methyl orange (MO) as models for cationic and anionic dyes. The kinetic and equilibrium adsorption have been investigated to determine the...

The current study investigates the ability of Nano magnetite as an adsorbent to remove organic materials from oilfield-produced water (PW). The effect of several variables on the removal procedure was investigated, such as nano magnetite dose, pH of solution and adsorption period. The adsorbent was...

In the present study the sorption efficiency of okra leave sorbent for As(III) and As(V) is demonstrated. Sorption reaction is pH and time dependent. The sorbent shows maximum removal of As(III) and As(V) at pH 7 and pH 6 respectively and equilibrium was achieved at 180 minutes. In isotherm study...

Sodium dodecyl sulfate sulfate modified Algerian cork powder (SDS-ACP) with interesting biosorption capacity was prepared for dye removal from aqueous media. The decolorization performance of SDS-ACP was studied using methylene blue (MB) as a model dye. Experiments were conducted in batch sysytem...

The calcined clam seashell powders were applied as adsorbent to adsorb Dibutyl phthalate (DBP), from an aqueous solution. The influence of calcination conditions including temperature and time on its adsorption capability to DBP was investigated. The shell powders calcined at 500 oC had the best...

In the present investigation, marine biomass (Posidonia Oceanica) (PO), in both its unmodified PO and basic-modified (Na-PO) forms, was studied for its possible utilisation as a cheap biosorbent for the retention of amoxicillin (AMX). Biosorption studies were carried out in a batch system and the...

An adsorbent was prepared from Mangosteen shell using sulphuric acid and sodium bicarbonate as modifiers. Bicarbonate treated mangosteen shell (BTMC) was characterized using FT- IR, SEM, EDAX and XRD data. The Freundlich adsorption isotherm model gives a good fit. The maximum adsorption capacities...

In this research, capability of adsorption of modified chitosan Nano composites with functionalized mesoporous silica which synthesized by electrospinning method in the removal of direct black ANBN dye has been studied. Silicate mesoporous were functionalized during synthesis process and then the...

This study highlights the potential of steel slag, which is an industrial by-product of steel making industry as treatment media for metal-rich acid mine drainage (AMD). A series of batch adsorption studies has been done to demonstrate the effects of contact time, solution pH, initial concentration...

Abstract: Water is the main factor of movement and transport of pesticides and contamination of water by these pollutants is one of the most important challenges due to their widespread use and increased concentrations. Moreover, these compounds are on the U.S.EPA Priority Pollutant list because of...

One of the known methods for dye removing from waste water is using sorbent material for fine removal of dye .The nano- cation exchanger Sulphonated poly glycidyl methacrylate (SPGMA polymer) was used as sorbent material for removing one of the common cationic dyes. SPGMA polymer was prepared and...

In this study, the potential textile dye biosorption capacity of a low-cost biosorbent (P. animale) was tested as functions of pH, biosorbent type, initial dye concentration, temperature, contact time and biosorbent dosage at batch scale level. The optimal conditions are 2, dried biosorbent, 93.16...

Synthetic dyes have a hurtful effect on human health and the environment. In this work, activated carbon was produced from date stones for use in elimination of methylene blue charged in aqueous solutions. Before that, the adsorbent was characterized by BET method, SEM, X-ray and TGA. The results of...

In this study activated carbon is produced from areca plant leaves, an agricultural waste material. The physical and chemical structural characterisation of the prepared carbon was carried out by FTIR, TGA and XRD analysis. FTIR study showed the presence of several functional groups, such as C=O, C...

Diplocyclos Palmatus biomass activated carbon (DPAC) was used in this work to remove lead (II) ion from the synthetic wastewater. The DPAC was characterized for structural, surface morphology by SEM, functional group was analyzed by FT-IR and XRD analysis. Removal of Pb2+ was studied by batch method...