Probability density functions (pdf) have been used in the analysis of the distribution of pollutant data, for examining the frequency of high concentration events. There have been very few studies on the concentration distribution of PM in urban areas. The distribution of PM concentrations has an...

It is well known that the studies that associate the climatic changes with the greenhouse effect, as a sequence of uninterruptedly ongoing figures in the concentration mainly of carbon dioxide, have been focused on the trends of the mean temperature. On the other hand the variability and the trends...

The wastewater of leather industry which is one of the most widespread industries having large amount of water consumption and very high pollution loads, may be characterized by several key parameters including toxic pollutants exhibiting toxicity. Therefore the effluent of leather tanning industry...

Nitrogen in the Ammonia form can have deleterious effects in water resources. Ion Exchange by zeolite and biological Nitrification processes are two proposed methods for removing Nitrogen compounds from wastewater and effluents. The main objective of this research was to investigate the efficiency...

Coals contain elements which, although usually found in concentrations lower than 1% (trace elements), can give rise to environmental or technological problems. After gasification most of these elements may occur in gas phase in different proportions. In order to avoid the problems that the presence...

At present, chemical processes are widely used to remove phosphorus and organic matter from water or wastewater either as the only advanced treatment method or as a pre-treatment stage to biological treatment, and aluminium salts have been traditionally used as coagulants. In the present study...

Combustion of poor quality coals is used today worldwide for energy production. The removal of polluting compounds, i.e. S, N, Hg and Cl from them prior to combustion is important not only for improving the coal quality, but also for meeting the strict environmental standards. Thus, a preventive...

Since discovery of harmful disinfection by products (DBPs) like trihalomethanes (THMs) and haloacetic acids (HAAs) in chlorinated waters the removal of organic DBPs precursors gained priority in drinking water treatment. Historically, coagulation process was arranged to remove turbidity, typically...

Speciation behavior of trihalomethanes formation in chlorinated waters due to the effects of bromide is mathematically modeled by a three-tier scheme. Equations for the mole fractions of the mono-, di-, and trihalo-intermediates at each tier level in terms of the initial bromide to chlorine molar...

This paper presents a biological method for controlling odor problems caused by H2S originating from sewer networks under anaerobic conditions. The proposed method is based on the continuous addition of nitrate which oxidizes dissolved sulphide according to an autotrophic biological procedure and...

Water movement in the unsaturated zone is an important hydrological process. Richard’s equation is windily used to describe both soil water infiltration and soil water absorption. Various methods have been developed to solve Richard’s equation. Wang et al. (2003) have developed an algebraic model...

Organophoshorous pesticides are widely used in agriculture, because most of them are high effective and low persistent. Yet their increased usage has elicited extensive research into pesticide effects on non-target organisms, such as algae. Algae are of vital importance in the primary production of...

The EU directive (2000/60/EC) known as the Water Framework Directive (WFD), identifies new methodology for monitoring and improving of surface water quality in the territory. This includes controlling land-based pollutants as well as defining the constraints for territorial planning. It is...

All stormwater management projects in Greece are required to get environmental permit before construction. The design return period is often determined by the environmental permit. Determination of design discharges is an important parameter for the design. Design discharge for a given return period...

Slurry seal is applied for low-cost paving and surface maintenance. The principal materials used to create slurry seal are aggregates, asphalt emulsion, water and fillers like Portland cement (mainly), lime and other materials. This paper presents the use of alternative fillers instead of expensive...

A program is developed that includes two hydrodynamic models, a 2D depth-averaged (2DH) and a Quasi-3D (Q3D), and a pollutant transport model that uses a 1st order upwinding and a 3rd order QUICKEST numerical schemes. Several tests were performed in two test basins in order to examine the...

This paper investigates the physical and chemical transformation of metallic lead (Pb) in Ft. Irwin firing range soils. Soil samples were collected from berms of two small arms firing ranges, an active one and an abandoned one, located in the Mojave desert. Pb bullet fragments found in field samples...