The detection of microplastics, defined as tiny plastics particles having a size from 1 µm to 5 mm, in aquatic environments has become a serious concern worldwide. Microplastics may be introduced either directly to water bodies or indirectly to the aquatic systems. In particular, microplastics may...

A green synthesis using a simple precipitation method produced zinc oxide (ZnO), leaf extractions of zinc oxide as Aerva lanata (Al-ZnO) and Millettia pinnata (Mp-ZnO), copper-doped Al-CZnO and Mp-CZnO nanoparticles (NAPs). They were characterized for their functional group, structural...

Earth is consisting of land, air and water. Air contains oxygen, nitrogen, carbon dioxide, water vapor, other gases are present above the permissible limit, and it creates effects on human health. It is one of the most important public health issues due to development of urbanization...

The application of ceramic Nanofiltration (NF) membrane in brackish water treatment is increasing due to strict water quality standards. Ceramic NF is a widely used membrane process and has replaced reverse osmosis (RO) membranes in many applications due to lower energy consumption and higher flux...

The photocatalytic process as an advanced oxidation process (AOP) has gained worldwide attention in the water and wastewater industry. The photocatalytic process can be used for water and wastewater disinfection. The aim of this study was to remove coliforms and faecal coliforms from real hospital...

Rapid urbanisation, industrialization, and population growth have fostered an urgent need for a green, clean-living environment. Among the many pollutants, gaseous pollutants like NO2, SO2, and particle pollutants like PM 2.5 and PM 10 have a profound negative impact on human health. In this...

In the present work, the potential of cumnium cyminum as an effective bio adsorbent for the removal of cationic dye (Red 95) was investigated. Batch adsorption experiments were carried out to investigate the effects of adsorbent dosage, pH and contact time with initial dye concentration on...

Water pollution has been acknowledged as an issue of concern due to recalcitrant pollutants like textile dyes. Therefore, the eco-friendly synthesis of nano-particles (NPs) through green chemistry approach from sources and materials of organic origin has not only enhanced the properties of substance...

The wastes are in many forms consist of organic materials like human, medical, food, plastics, construction waste etc. many researchers are focused on the waste management to gives more importance to the environment. The bio degradable waste was used in this research with naturals fibers. The need...

The pollution and toxicological effects of microplastics in soil have gradually attracted widespread attention, but studies on the ecological effects of microplastics on soil microorganisms and their mechanisms are still very scarce. To explore the physiological response of ectomycorrhizal fungi...

The locally available tamarind fruit shells (TFS) pre-treated with 1N H3PO4 was used to remove the hexavalent chromium (Cr6+) from aqueous phase. The investigation was done by using continuously mixed batch reactor (CMBR) under room temperature. Few preliminary investigations was undertaken to...

Dinitrobutylphenol is a toxic and resistant pollutant that pollutes the environment by producing toxins and chemical wastewater. Present paper aims to study the efficiency of the magnetic particles of walnut hard shell ash as a cheap and bi-compatible adsorbent for the removable of DNBP from aqueous...

In the present study, fruits of Ceratonia siliqua L. (carobs) were used as an alternative low cost biosorbents to remove a cationic dye, methyl violet 2B (MV) which has broad applications in paints, textile and printing ink, from aqueous solutions. The untreated (CRM) and thermal treated carobs (CC)...

Growing environmental awareness coupled with stricter regulations has pushed various industries to look for appropriate technologies to treat wastewater. Natural coagulants have recently been used as part of water and wastewater technologies due to their performance, cost-effectiveness when compared...

The precise analysis of conditions in the landscape before and aftermath of the disaster is a mandatory challenge in aerial image landscape monitoring. The change in patterns of landscape, damaged pathways, and damaged areas will have a major impact without monitoring and redevelopment. Therefore...

The packed bed column study investigated the removal of toxic metal ions (Cr, Pb & Zn) using rice husk coated with iron oxide nanoparticles as an adsorbent material. The chemical fusion process prepared the nanomaterial adsorbent, and iron oxide capping provides stability to the prepared nano...

250 million people worldwide suffer from visual impairment. 64% of them wear glasses. More than 80 percent of all eyeglasses worn today have plastic lenses. Plastic lenses made of polycarbonate discs are created through the process of machining which requires the use of a coolant. The ensuing...

Gas sparging has emerged as an effective technique for control of particle fouling in different microfiltration membrane processes. However most of the research work carried out has been pertinent to hollow fiber and tubular membrane geometries. A little attention has been paid to evaluate the...

Electrochemical Machiningplayed a vital role in the aircraft, atomic, and healthcare industries via electrochemical machining (ECM). Even with difficult-to-machine materials. ECM has generally preferred to machine Nickel-based alloys compared to other non-conventional and conventional machining...

The development of magnetic sorbent for dispersive solid-phase micro-extraction (DmSPE) often requires lengthy multi-step reactions. This research revealed a simplified method for preparing magnetic sorbent for the DmSPE using poly(4-vinylphenol) (PVP). The magnetic sorbent (PVP@MNP) was prepared by...

The degradation of Remazol Black (RBB) by S-TiO2 photocatalyst was investigated. X-ray diffraction, fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and UV-vis specular reflectance spectroscopy has been used to characterize S-TiO2. The results...

In the present study the sorption efficiency of okra leave sorbent for As(III) and As(V) is demonstrated. Sorption reaction is pH and time dependent. The sorbent shows maximum removal of As(III) and As(V) at pH 7 and pH 6 respectively and equilibrium was achieved at 180 minutes. In isotherm study...

In the present work, corn stalk was used as a low cost adsorbent for removal of anionic dye (" CBB"). Corn stalk was treated with two methods to inform Modified corn stalk with magnetic particles (MMCS) and Modified corn stalk with sulfuric acid (SMCS). Comparison between raw and treated corn stalk...

In this research, the selective leaching of copper from waste printed circuit boards (PCBs) using glycine as a complexing agent was investigated. PCBs were pulverized and sieved, which allowed obtaining a PCBs powder of particle size fraction ≤ 1mm. The PCBs powder has been characterized by several...

Zinc tungstate (ZnWO4) photocatalyst was synthesized by precipitation method and treated with different non-thermal plasma to study its morphology, structure and photocatalytic activity. The X-ray diffraction results revealed that the plasma-treated ZnWO4 exhibited only wolframite structure and its...