Municipal solid waste [MSW] has gained prominence in recent years as the rate of its generation has increased significantly. The serious problem of MSW management exists in almost all regions of India. This study aims to generate energy from MSW by selecting a suitable MSWM technology with the help...

This work illustrates the co-composting of Gelatine Industry Sludge (GIS) combined with organic fraction of Slaughter House Waste (SHW) and Rice Straw (RS) employing 10% zeolite mixed with Enriched Nitrifying Bacteria Consortium (ENBC). Five piles of GIS will be prepared and mixed with SHW and RS at...

This study aimed to explore the effect of pure oxygen aeration on the generation of soluble microbial products (SMP) when activated sludge was under toxic stress condition of phenol. Two parallel sequencing batch reactors, one with air and the other with pure oxygen aeration, were used to...

Chlorella microbial fuel cells may be an alternative technology for wastewater treatment. Using microalgae and activated sludge as raw materials, a C-MFCs was established, and the effects of different nitrogen and phosphorus ratios in the influent on the electrochemical performance of C-MFCs and the...

Dual-chamber microbial fuel cell (MFC) was constructed to treat heavy metal wastewater (Pb2+ solution). The results showed the maximum voltage, the maximum electric power density and pb2+ removal were 9.6 mV, 371.0 mV/m2 and 52.3% respectively. The effects of different cathode chamber environments...

This research describes the bacteriological and physicochemical impact of two types of irrigation water on soil and turfgrass quality during 2018 and 2019. Wastewater treated by an activated sludge process coupled with UV disinfection UV-TW was compared to fresh water FW. The first cycle (2018) was...

The unique high-altitude environmental factors in the Linzhi region of Tibet have not been fully investigated in terms of their impact on the microbial mechanisms of water ecology, for which we explored the response of activated sludge microorganisms to different hydraulic retention times (HRT)...

Dewatered sludge is the main by-product from wastewater treatment and it contains various types of hazardous substances which can cause environmental pollution. The alternative utilization of sludge waste is for covering the landfill or as liner for the landfill. Landfill cover is a critical...

Integrated anammox process has competitive advantages of low energy and carbon consumption in nitrogen removal. Because of the coupling of partial nitrification and anammox process, complex physicochemical and biological interactions occur in integrated anammox reactors, and long-term operation...

Growing environmental awareness coupled with stricter regulations has pushed various industries to look for appropriate technologies to treat wastewater. Natural coagulants have recently been used as part of water and wastewater technologies due to their performance, cost-effectiveness when compared...

ABSTRACT Plastic pollution is increasing and plastic waste usually ends in environment. Microplastics (MP) as insoluble and anthropogenic micropollutant is ubiquitous and its concentration is expected to increase in the environment. One of important sources are wastewater treatment plants, where...

Electrochemical Machiningplayed a vital role in the aircraft, atomic, and healthcare industries via electrochemical machining (ECM). Even with difficult-to-machine materials. ECM has generally preferred to machine Nickel-based alloys compared to other non-conventional and conventional machining...

The reductive gas composition produced by the reburning of sludge can reduce NOx in flue gases to N2, which provides a new idea for the study of gas denitration, and at the same time makes denitration by sludge reburning become an important part of gas denitration research. However, due to the...

This study evaluates the pyrolysis of sewage sludge until 960 °C using heating rates between 3 K/min and 12 K/min in a macro TG/EGA. Mass and energy balances and kinetic parameters are determined. Thermal decomposition is divided into a low temperature zone (until 550 °C to 590 °C), for...

A pilot-scale sequencing batch reactor (SBR) for anaerobic ammonium oxidation (anammox) of bacteria culture was used along with a batch experimental reaction device to study the effect of NO2--N concentration on the activity of anammox bacteria and the recovery of N2H4 on anammox bacteria after...

Conversion of ammonia to nitrate is sensitive to a number of inhibitors. There is limited information on the nitrification inhibition coefficient and kinetic model in the current literature. Octyl Phenol Ethoxylate (OPE) and Bisphenol A (BPA) inhibition constants were found in nitrogen removal using...