In recent years, there has been growing concern regarding undesirable side effects of synthetic antimicrobial drugs used for food preservation or in medicine and an explosive global spreading of multidrug resistant microbes are considered as a substantial global health threat. This necessitates the...

The production of bio-pellets is an alternative to add value to the residual biomass of the oil palm-extraction process. In this work, an experimental study of the pelletising process of oil palm residual biomass blends is presented. An experimental full factorial design that uses as factors the...

An experimental investigation was carried out to compare the compressive strength of zero slump and high slump concrete with high volume fly ash. 40% to 70% replacements of OPC (by weight) with class F fly ash have been incorporated. Superplasticizer was added at 1% of binder (cement + fly ash) to...

Geologic storage of carbon dioxide (CO2) has been proposed as a viable means for reducing anthropogenic CO2 emissions. Once injection begins, a program for measurement, monitoring, and verification (MMV) of CO2 distribution is required in order to: a) research key features, effects and processes...

This study examines stabilization/solidification (S/S) techniques for coal ash/cement systems that involve the production of construction products while minimizing contamination and recycling the coal ash (CA). In these techniques, the polluted components of coal ash are fixed in a cement body via...

The performance of a laboratory scale electrocoagulation system for the removal of Cr and Ni from model wastewater was studied systematically using iron and aluminum electrodes with an effective surface area of 13.8 cm2 and a distance of 4 cm. The influence of several parameters, such as initial...

To inform the further development of water pricing in Shiyang River basin, a typical arid region in northwest China with agriculture as the major consumer of water, this research conducted a contingent valuation study on farmer’s willingness to pay (WTP) for irrigation water. The results show that...

The air pollution has a great impact on the social and economic aspects all over the world. Thus, the interaction of materials with the atmosphere has received increased attention nowadays. In order to estimate the impacts of air pollution on the solid surfaces a suitable scientific basis is...

In the present study, the wet oxidation of zinc and copper cyanide complexes (cyanide concentration of 1,000 mg dm-3) was conducted in a hydrothermal reactor, under oxygen atmosphere of which the pressure was set to 1 MPa. The pH of the reaction solution was kept in the range of 11 to 12 and the...

Coal fly ashes and metallurgical slags are currently widely used as supplementary cementitious materials in production of Portland cement-based concretes. However, this application makes very poor use of the intrinsic reactivity of the glassy phases present in the waste materials, and can hardly...

The present paper aims to assess the effect of various additives on the compressive strength of inorganic polymers (geopolymers) synthesised using low Ca electric arc ferronickel slag and alkali activating solutions. The main operating parameters include pre-curing (48 hours), temperature (40 to 80...

This paper deals with the geopolymerization of the red mud generated in the primary aluminium production and the slag generated in the ferronickel production, in order to develop inorganic polymeric materials with advanced mechanical and physical properties. In particular, the effect of the main...

Disposing of plastic wastes to landfill is becoming undesirable due to legislation pressures, rising costs and the poor biodegradability of commonly used polymers. In addition, incineration meets with strong societal opposition. Therefore, recycling either mechanical or chemical, seems to be the...

Fly ash is an important industrial by-product that comes from the combustion of coal, for the production of electrical energy. In our country, only a small percentage is used for the construction of technical projects, while the rest is stockpiled, causing serious problems. Because of its great...

Laboratory studies reported earlier, have shown very promising results in the selective removal of dyes from aqueous solutions by a commercially available (super absorbent polymer) SAP, Jalshakti® (JS). JS is mesoporous in nature and is a potential adsorbent for the basic dyes studied. This paper...

A procedure that should be implemented for the evaluation of materials suitability, in terms of their use as metal retention agents, is presented. It derives from a review of materials and waste treatment mechanisms, which has been studied and is also presented. Lignite fly ash, agricultural ashes...

Laboratory column tests were conducted to study the efficiency of lignite fly ash barriers in removing heavy metal ions, such as Fe, Zn, Mn, Ni, Cd, Co, Al and Cu, present in high concentrations in acidic leachates produced in mining and waste disposal sites. The experimental configuration comprised...

The oxidation of NO over Co-, Pt- and Rh-based catalysts was studied by combined catalytic activity and FT-IR studies. The activity of Co-, Pt- and Rh-based catalysts was measured in the presence and absence of H2O and SO2 in the feed. The activity studies showed that the support (Al2O3, TiO2, ZrO2)...

The development of a conceptual site model (CSM) is an invaluable tool used for assessing and planning remedial actions at a contaminated site. The CSM incorporates site-specific, hydrogeologic and geochemical information to identify contaminants of concern, sources of pollution, environmental...

A model and spreadsheet-based numeric approximation for computing risk-based soil cleanup level to be protective of petroleum-contaminated soil to an indoor air exposure pathway is presented. The algorithm incorporates traditional equilibrium partitioning equations (3 or 4-phase) for the...

This study was conducted to assess the removal efficiency of Di-n-butyl phthalate (DnBP) from aqueous medium using the photo-Fenton process. The Fenton's reagent that consists of a mixture of hydrogen peroxide (H2O) and ferrous ions (Fe2+) was used to generate the hydroxyl radical (OH0) that attacks...

The soil adsorption behaviour of atrazine and its photodegradation intermediate 4,6-diamino-2-chloro-1,3,5- s-triazine (I), was evaluated by measuring partition coefficients on five representative European topsoils using classical batch experiments. From this study, (I) appears to be less...

Sites co-contaminated with organic and metal pollutants are common and considered to be a more complex problem, as the two components often have a synergistic effect on cytotoxicity. This study investigated the dissipation mechnisms for pyrene in cadmium co-contaminated soil in which maize (ZEA MAYS...

Zinc oxide nanocrystals were prepared by precipitation method using ZnSO4.7H2O and NaOH as raw materials. The prepared ZnO nanocrystals were characterized by powder X-ray diffraction (XRD). Primary objective was to focus on the influence of inorganic oxidants, metal ions and anions on photocatalytic...

Saltscapes are landscapes with a long lasting salt-making activity, thus embedded with a blend of salt-related characteristics that marked them physically, ecologically, economically, and culturally. This study, based on a broad survey, focuses on the changing atlas of saltmaking business and the...