The nanocomposites of poly(o-chloroaniline) with titanium dioxide have been prepared via chemical oxidative polymerization technique using o-chloroaniline monomer and titanium dioxide nanoparticles for photocatalytic application. The different composites were prepared by varying the load percentage...

Pure and Zr doped ZnO thin films were prepared using SILAR technique. The influence of Zr doping on structural, morphological, optical and gas sensing properties of ZnO has been reported. X-ray diffraction study confirmed the formation of wurtzite structure of ZnO thin film (JCPDS 36-1451)...

Water pollution caused by various toxic contaminants has become one of the world's most serious issues. Nanotechnology has received a lot of attention in recent decades, and various nanomaterials for water remediation have been developed. For this purpose, MWCNTs were directly synthesized using a...

The current study investigates the ability of Nano magnetite as an adsorbent to remove organic materials from oilfield-produced water (PW). The effect of several variables on the removal procedure was investigated, such as nano magnetite dose, pH of solution and adsorption period. The adsorbent was...

An adsorbent was prepared from Mangosteen shell using sulphuric acid and sodium bicarbonate as modifiers. Bicarbonate treated mangosteen shell (BTMC) was characterized using FT- IR, SEM, EDAX and XRD data. The Freundlich adsorption isotherm model gives a good fit. The maximum adsorption capacities...

In this research, capability of adsorption of modified chitosan Nano composites with functionalized mesoporous silica which synthesized by electrospinning method in the removal of direct black ANBN dye has been studied. Silicate mesoporous were functionalized during synthesis process and then the...

Zinc tungstate (ZnWO4) photocatalyst was synthesized by precipitation method and treated with different non-thermal plasma to study its morphology, structure and photocatalytic activity. The X-ray diffraction results revealed that the plasma-treated ZnWO4 exhibited only wolframite structure and its...

One of the major challenges faced by researchers is to recycle industrial wastes in a manner that reduces their environmental impact in nature. An experimental study was carried out to determine the suitability of using chopped tire rubber as reinforcements in green and sustainable geopolymer...

Composite based Ca/Al layered double hydroxide and biochar was prepared using mixing coprecipitation method at pH 10. Composite and the starting materials was characterized using X-ray, FTIR, BET, thermal, and SEM-EDX analyses. Furthermore, composite was used as adsorbent of methylene blue from...

In the present study, the NO2 removal efficiency at concentrations of 3000 to 5000ppm was evaluated by nickel and platinum bimetallic catalyst supported on multiwalled carbon nanotubes (Ni-Pt/MWCNT) along with water vapor at different space velocity and temperatures. Morphological and structural...

In this study, an investigation was carried out in order to determine the potential of ordered mesoporous carbon including high ratio sucrose in its composition as a CO2 adsorbent. Structural characterizations of silica and carbon material were determined by using a scanning electron microscope (SEM...

Microspheres (MSs) of paramagnetic iron oxide (α-Fe2O3) embedded with palladium nanocubes (PdNCs) were biosynthesized using Myrtus cumini L. leaf extract. The synthesized PdNCs embedded α-Fe2O3 microspheres were characterized using FTIR, XRD and SEM/EDX. The FTIR spectrum of the Myrtus cumini L...

Synthetic dyes have a hurtful effect on human health and the environment. In this work, activated carbon was produced from date stones for use in elimination of methylene blue charged in aqueous solutions. Before that, the adsorbent was characterized by BET method, SEM, X-ray and TGA. The results of...

Diplocyclos Palmatus biomass activated carbon (DPAC) was used in this work to remove lead (II) ion from the synthetic wastewater. The DPAC was characterized for structural, surface morphology by SEM, functional group was analyzed by FT-IR and XRD analysis. Removal of Pb2+ was studied by batch method...

The objective of the study is to determine accumulation and translocation of heavy metals from soil to paddy straw irrigated with urban sewage wastewater in peri-urban region of Girudhumal subbasin area in Madurai. The soil samples were collected in seven locations irrigated with treated and...

The intent of this research is the investigation of the nitrate reduction from aqueous solution using biomass (pine cone (PC) and PC activated carbon (PCAC)) – supported zero valent iron nanoparticles (PC-Fe0 and PCAC-Fe0). The synthesis of these nano-bio-composites was based on the reduction of...

In this research, the Ag2CO3-PANI composite was synthesized with a simple precipitation method and then used as an effective adsorbent for adsorption of Methylene Blue cationic dyes from aqueous solution. Characterization of the adsorbent was carried out using UV–visible diffuse reflectance...

In the present study, the adsorption of Remazol Brillant Green 6B (RBG 6B) on chitin which characterized by BET, FTIR, XRD and SEM analysis was studied. Response surface methodology (RSM) was applied to determine interaction between solution pH, initial RBG 6B concentration and chitin dosage being...

This study investigates the feasibility of using cathode catalyst (Iron phthalocyanine (FePc) combined multi walled carbon nano tubes (MWCNT) and compares the oxygen reduction rate under different conductivity of catholite solution (50 mM, 100mM) in double chamber Microbial Fuel Cell. Microbial fuel...

Response surface methodology has been used to design experiments and to optimize the effect of independent variables responsible for higher adsorption of humic substances by activated carbon supported nanoscale zero-valent iron from aqueous solutions. The variables of initial concentration, time, pH...

A wide range of technologies has been developed for the removal of dyes from wastewaters to decrease their environmental impact. Wastewater containing dyes is generally treated using more than one process such as adsorption/biosorption. In this study, effects of initial pH (2-8), initial azo dye...

The activated charcoal (AC) was synthesized from banana leaf rim (BLR) through three activation methods; physical (BLRC), chemical (Z BLRC, zinc chloride) and microwave activation (MW BLRC). The AC was characterized using fourier transform infrared spectrometer (FT-IR), Thermogravimetric analysis...

This study describes the removal of Cr (VI) ions from aqueous solutions using silver oxide/sawdust nanocomposite (Ag2O/SD NC) that was prepared using the chemical precipitation method. Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR)...

V 2O 5-WO 3/TiO 2 catalysts were fabricated by a simple impregnation method. Effects of V 2O 5 and WO 3 loadings on the catalytic performance of V 2O 5-WO 3/TiO 2 catalyst for selective catalytic reduction (SCR) of NO with NH 3 were investigated. Morphology and structure of the V 2O 5-WO 3/TiO 2...

Application of nano particle in the treatment of municipal solid waste leachate is of recent interest. In this paper, the effectiveness of silica nano particles synthesized from blast furnace slag and iron nano particle synthesized from chemicals was studied for the removal of organic pollutants and...