In this study, Chlorella vulgaris microalgae was cultivated from wastewater and converted into biochar through hydrothermal carbonization process. Acclimatization of microalgae resulted in a greater biomass yield of 4.1 g/L in 15 days in a Fog's medium to wastewater ratio of 20:80. Microalgae...

TiO2 is the most effective photocatalyst but it has low adsorption in the visible region. Many efforts have been done to improve its photocatalytic activity in the solar region. In this study we use Mo-oxy species supported on titania surface since it is well known that titania surface can dispersed...

Synthesis of Ni/Al-LDH prepared into Ni/Al-Hc composites using hydrochar from rambutan peel (Hc) and applied as a congo red adsorbent and analyzed based on adsorption selectivity, kinetics, isotherms, adsorption thermodynamics and recycling. The success of Ni/Al-Hc composite preparation was proven...

This study focused on removing methylene blue (MB) from aqueous solutions using microalga Scenedesmus regularis as a biosorbent. The biomass was characterized by Fourier transform infrared spectroscopy (FT-IR) and field emission scanning electron microscopy (FE-SEM). The difference in thermal...

Biochar was synthesized from Kappaphycus alvarezii reject (KR) remove the anionic azo dye, Acid Red 88 from wastewater. In this study, biochar was experimented in both batch and column adsorption studies. Batch adsorption studies were performed at varying temperature (25 – 40 °C), dosage (1 – 10 g)...

The present communication attempts to explore the adsorption potential of Mixed Fruit Peel Waste (MFPW) to remove Sunset Yellow FCF dye from an aqueous solution. The MFPW is a low-cost adsorbent prepared from the peels orange, watermelon and banana. The characterization of MFPW was made through FTIR...

Adsorption of heavy metal ions (Cr, Pb & Zn) using prosopis julyflora roots has been investigated by batch adsorption and fixed bed column process. The various properties of adsorbent were analysed and the FT-IR spectra & SEM studies of prosopis julyflora powder, before and after adsorption of metal...

In this study the efficiency of crystal violet dye removal from aqueous solutions using lilac tree leaf powder as adsorbent material was tested. After adsorbent surface analysis by SEM and FTIR technics, the influence of six controllable factor on dye adsorption process was assesses using a L27...

This study evaluates the pyrolysis of sewage sludge until 960 °C using heating rates between 3 K/min and 12 K/min in a macro TG/EGA. Mass and energy balances and kinetic parameters are determined. Thermal decomposition is divided into a low temperature zone (until 550 °C to 590 °C), for...

Silver nanoparticles (GSNPs) were synthesized from extracellular metabolites of endophytic isolates of Fusarium verticillioides (KT587649) to evaluate their efficiency as new biosorbent agents for the exclusion of cadmium Cd (II) from aquatic systems. The GSNPs were characterized through X-ray...

The degradation of Remazol Black (RBB) by S-TiO2 photocatalyst was investigated. X-ray diffraction, fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and UV-vis specular reflectance spectroscopy has been used to characterize S-TiO2. The results...

In the present study the sorption efficiency of okra leave sorbent for As(III) and As(V) is demonstrated. Sorption reaction is pH and time dependent. The sorbent shows maximum removal of As(III) and As(V) at pH 7 and pH 6 respectively and equilibrium was achieved at 180 minutes. In isotherm study...

Sodium dodecyl sulfate sulfate modified Algerian cork powder (SDS-ACP) with interesting biosorption capacity was prepared for dye removal from aqueous media. The decolorization performance of SDS-ACP was studied using methylene blue (MB) as a model dye. Experiments were conducted in batch sysytem...

In the present work, corn stalk was used as a low cost adsorbent for removal of anionic dye (" CBB"). Corn stalk was treated with two methods to inform Modified corn stalk with magnetic particles (MMCS) and Modified corn stalk with sulfuric acid (SMCS). Comparison between raw and treated corn stalk...

In this study, water-soluble disperse dyes [Disperse Violet 93 (DV93); Diffused Blue 79 (DB79); Disperse Orange 30 (DO30)] color removal by ozonation, which is one of the advanced treatment methods of synthetic dye waste solutions containing and whose decolorization conditions have not been...

In the present investigation, marine biomass (Posidonia Oceanica) (PO), in both its unmodified PO and basic-modified (Na-PO) forms, was studied for its possible utilisation as a cheap biosorbent for the retention of amoxicillin (AMX). Biosorption studies were carried out in a batch system and the...

Layered double hydroxides (LDHs) of MgM3+ (M3+=Al and Cr) were synthesized by coprecipitation method to form Mg/Al and Mg/Cr LDHs. The materials were applied as adsorbents of malachite green in aqueous solution. The physical properties of Mg/Al and Mg/Cr were analyzed using XRD, FTIR, BET and TGDTA...

An adsorbent was prepared from Mangosteen shell using sulphuric acid and sodium bicarbonate as modifiers. Bicarbonate treated mangosteen shell (BTMC) was characterized using FT- IR, SEM, EDAX and XRD data. The Freundlich adsorption isotherm model gives a good fit. The maximum adsorption capacities...

The aim of this study was to optimize the removal of Naproxen (NPX) by the UV/ZnO photocatalytic process using response surface methodology based on Central Composite Design (CCD). The effect of parameters such as ZnO concentration, contact time, pH, temperature, and initial NPX concentration were...

At this study, electrochemical oxidation of cefaclor antibiotic was investigated with new generation Sn/Sb/Ni-Ti anodes. Platinized titanium was used as cathode material. Chemical oxygen demand (COD), total organic carbon (TOC) and cefaclor (CEF) active substance parameters were used to evaluate the...

This study highlights the potential of steel slag, which is an industrial by-product of steel making industry as treatment media for metal-rich acid mine drainage (AMD). A series of batch adsorption studies has been done to demonstrate the effects of contact time, solution pH, initial concentration...

Abstract: Water is the main factor of movement and transport of pesticides and contamination of water by these pollutants is one of the most important challenges due to their widespread use and increased concentrations. Moreover, these compounds are on the U.S.EPA Priority Pollutant list because of...

One of the known methods for dye removing from waste water is using sorbent material for fine removal of dye .The nano- cation exchanger Sulphonated poly glycidyl methacrylate (SPGMA polymer) was used as sorbent material for removing one of the common cationic dyes. SPGMA polymer was prepared and...

In this study, an investigation was carried out in order to determine the potential of ordered mesoporous carbon including high ratio sucrose in its composition as a CO2 adsorbent. Structural characterizations of silica and carbon material were determined by using a scanning electron microscope (SEM...

The commercial imidacloprid (IMD) insecticide [1-(6-chloro-3-pyridinyl) methyl-4,5-dihydro-N-nitro-1H-imidazole-2-amine] is widely used for the enhancement of crop production, but the intensive use of this insecticide has caused serious environmental problems. This work presents an electrochemical...