More than seventy percent of mineral gets wasted during mining and polishing processing, and all this dumped waste threatens the aquifer. Utilizing this waste in construction works helps to reduce the environmental effects. This research aims to protect the environment by implementing mineral waste...

Since concrete is a fundamental component of all types of construction, many researchers are concentrating on developing High Performance Concrete (HPC) using efficient manufacturing processes. Nano silica is a quartz and silica dust this can be replaced instead of cement to achieve great strength...

The active components of Jordanian Peganum harmala L. (P. harmala) were investigated using both GC-MS and DFT calculations. The study focused on the methanol extract of P. harmala leaves, which was found to contain 21 significant natural components, of which 9 compounds constituted more than 2% of...

In this study, an attempt is made to understand the effectiveness on initial treatment of coconut shell on the strength of concrete. The coconut shell materials obtained from the agricultural wastes are used as a replacement for coarse aggregate in conventional concrete. From the particle size...

In the present study, nanocellulose was successfully extracted from durian husk via chemical treatment and then characterized by several analytical techniques, involving X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDX) and...

Pozzolanic material and a chemical admixture have been used in the current investigation; Nano Biomass Silica (NBS) and Poly-Carboxylate Ether (PCE). NBS produces 20% of the 590 million tonnes of paddy produced globally. Amorphous silica, a mineral component used in concrete, is present in sizable...

The aim of this study was to investigate the tensile strength reduction of four different materials: steel, polypropylene, polyethylene and glass fiber/epoxy (GFRP), under the conditions in a chemical scrubber. In detail, the performance of these materials in an acidic environment was assessed. The...

The process of making portland cement uses up a lot of resources and has a harmful environment effect since it produces a lot of greenhouse emissions. The by-product of the stone cutting and polishing industries is Bethamcharla waste Stone Powder (BWSP). Each industry produces an average of one...

COVID-19 pandemic is a major worldwide health disaster firstly reported in December 2019. The Food and Drug Administration (FDA) has offered the public hope of halting it, authorizing vaccinations for emergency use with more than 85% efficacy against serious acute respiratory syndrome (SARS-CoV-2)...

Industrial wastes represent a huge issue for the environment and precious materials for microbial growth. Utilizing these wastes in different fermentation process decrease the costs of production, materials, energy, and represent an eco-friendly way of waste recycling. Aspergillus niger (ASU49) is...

This essay deals with the prospects of supplying humanity with energy in the twenty-first century. The gradual replacement of fossil fuels by green electricity, hydrogen and biofuels is examined in the context of deteriorating climate change and the ongoing depletion of fossil fuels. The production...

The large cities are facing with a phenomenon called high-rise buildings which is due to the increasing of the population and also developing the cities. One of the negative impacts of high-rise buildings is the change in urban wind flow. Air pollutions is a major problem in the cities and the wind...

The nanocomposites of poly(o-chloroaniline) with titanium dioxide have been prepared via chemical oxidative polymerization technique using o-chloroaniline monomer and titanium dioxide nanoparticles for photocatalytic application. The different composites were prepared by varying the load percentage...

Carbon footprint (CF) is a measure of greenhouse gas emissions generated from daily human-induced activities as carbon dioxide equivalent. This study is an attempt to represent a consumption-based CF study from the scope of transportation, electricity, and waste generation for University of the...

(E)-2-((pyren-1-ylmethylene)amino)phenol (3) containing pyrene linked through an imine bond to a phenol unit was synthesized and its Fe-complex 4 was prepared. The complex 4 is characterized by infrared (IR), x-ray diffraction (XRD) and UV-Vis spectroscopy techniques. The synthesized complex was...

Natural products have always been appreciated due to the awareness about environmental standards for global health by using green technologies in their isolation and extraction. Thereupon natural dyes have been used in all fields due to having ecofriendly, therapeutic and aesthetic nature. For the...

The regulatory framework of heavy metal pollution associated with electronic waste is prevalent all over the world. As a result of technological advancement and change in consumer patterns, the life span of electrical and electronic products has been shortened. This has contributed to the emergence...

With the rising interest for sustainable power source and ecological security, anaerobic digestion of biogas technology has attracted considerable attention within the scientific researchers. This paper proposes a new research achievement on biogas production from Rice Mill Wastewater (RMW) with the...

Due to hazardous effluent load of synthetic dyes, the global community is now seeking inclusion of natural products particularly green dyes and pigment in various fields. Current study has been concerned with utilization of eco-friendly tools for isolation of colorants from plant wastes such as...

Zinc tungstate (ZnWO4) photocatalyst was synthesized by precipitation method and treated with different non-thermal plasma to study its morphology, structure and photocatalytic activity. The X-ray diffraction results revealed that the plasma-treated ZnWO4 exhibited only wolframite structure and its...

We utilized satellite and GIS technologies to address the relationship between urban land uses and Noise Pollution (NP) in one of the most crowded regions of Tehran city. Leq was determined in 170 stations of the studied area and an acoustic map was created. Moreover, using satellite remote sensing...

The purpose of this paper is the presentation of the results compiled from self weighing of household food waste and self filling of waste collection diaries that took place in Greece. A diary was compiled and given to 101 urban households in various areas of the country. The participants were asked...

Contaminants of emerging concern (CECs), such as pharmaceuticals and personal care products (PPCPs) and as endocrine disrupting compounds, have recently recognized as the next set of pollutants due to their toxic effects on human health and aquatic organisms at very low concentrations. One of...