Groundwater is one of the important sources of drinking water In Jijel (northeastern Algeria). Various analyses have shown critical concentrations of lead and cadmium in several groundwater sources used for drinking. The aim of this study is to evaluate the contamination by lead and cadmium of...

In the present investigation, an attempt for the reduction of six hazardous air Pollutants (HAPs) from diesel exhaust by different blends of diesel and biodiesel has been made. The synthesis of biodiesel has been done from Jetrofa, Linseed Castor and Karanja oils which are commonly used in the...

The removal of Lead (II) from aqueous solutions using Fagopyrum esculentum Moench (Buckwheat) and Bambusa vulgaris (common bamboo) as adsorbents was investigated. The effects of various experimental parameters such as initial concentration, contact time and pH have been studied using batch...

Presence of metals even at trace levels in natural waters pose sever health risks. Heavy metals are introduced to coastal and marine environments through a variety of sources and activities including sewage and industrial effluents where Black Sea is not different. However, metals behave differently...

Particles with aerodynamic diameters 1 μm (PM1) damage human health more severely than do coarse particles. In this study, PM1 number concentration, traffic flow, temperature and relative humidity in both a residential underground garage and at the entrance/exit, wind velocity at the entrance/exit...

In this study, potential of neural network to estimate daily mean PM10 concentration levels in Sakarya city, Turkey as a case study was examined to achieve improved prediction ability. The level and distribution of air pollutants in a particular region is associated with changes in meteorological...

The Pharmaceutical contaminants specialist antibiotics into environment can create problems for both human health and environment. Ciprofloxacin (CIP), an antibiotic Fluoroquinolones group, has recently been used widely for infections treatment. The main purpose of the research was to develop a Full...

In the present study, the adsorption of Remazol Brillant Green 6B (RBG 6B) on chitin which characterized by BET, FTIR, XRD and SEM analysis was studied. Response surface methodology (RSM) was applied to determine interaction between solution pH, initial RBG 6B concentration and chitin dosage being...

The aim of this study is to investigate the performance of solar photo-catalyst of titanium oxide (TiO2/Solar) process to treat rainwater. The polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) in rainwater were chosen to be investigated in this study. The rainwater...

The content of heavy metals in sediment and the aquatic plant Phragmites australis (roots and leaves), collected from six different stations along the Nil river, were determined providing information about heavy metals pollution status of this aquatic ecosystem. The results showed that the abundance...

The paper presents a laboratory study of concrete mixes based on the alkali-activation of an industrial by-product, ground granulated blast furnace slag (GGBS). A number of factors potentially affecting the resulting concrete quality in terms of workability and strengths were investigated (namely...

Clay of the Middle Atlas Mountains region, Morocco, was used to investigate the removal of heavy metals ions (Cadmium and Copper) from aqueous solutions with respect to several experimental conditions including pH, contact time, initial solute concentrations, temperature and ionic strength. Kinetic...

The concentrations (for two hydrological years) of the heavy metals As, Cd, Cr, Ni and Pb as well as the isotopic 206Pb/207Pb composition in soil layers were studied in a remote mountainous Bulgarian fir (Abies borisii regis) forest in central Greece. The concentrations of metals in the hydrological...

Polycyclic aromatic hydrocarbons (PAHs) are a group of quotidian organic compounds having between two and six condensed aromatic rings braced in angular, cluster or linear forms possessing hydrogen and carbon atoms only. This work aims to evaluate the physicochemical characteristics of soil as...

In this study, chemical composition of coarse (PM2.5-10) and fine (PM2.5) aerosols and their seasonal characteristics was used to investigate factors affecting seasonal variations in concentrations of species. Concentrations of 17 trace elements and SO42- were determined in coarse and fine aerosol...

In this study, 55 ozone precursor VOCs, which are routinely measured in PAMS (Photochemical Assessment Monitoring Station) were measured in a suburban station located at Middle East Technical University, Environmental Engineering Department in, Ankara. Daily air samples were collected in evacuated...

The method of Levenberg-Marquardt learning algorithm was investigated for estimating tropospheric ozone concentration. The Levenberg-Marquardt learning algorithm has 12 input neurons (6 pollutants and 6 meteorological variables), 28 neurons in the hidden layer, and 1 output neuron for the Ozone (O3)...

In this study, dehydrated cottonseed cake as a low-cost and abundant byproduct in Turkey was utilized as an adsorbent for the decolorization of Reactive Blue 19 (RB19) and Reactive Yellow 145 (RY145) from aqueous solutions based on adsorption and ultrasound-assisted adsorption (UAA). Decolorization...

Sulfur dioxide (SO2) emissions lead to negative environmental impacts and it is considered as an indicator for the larger group of gaseous sulfur oxides (SOx) in the air. In this paper, the dimethylamine (DMA) solution was used as the absorbent in a α-Al2O3 hollow fiber membrane contactor that is...

Protozoa play a significant role in activated sludge systems, since they graze on dispersed bacteria, supporting a healthy food web in the activated sludge artificial ecosystem. However, operational parameters and influent properties are the most important factors affecting the composition of...

This study was conducted to remove Methylene Blue (MB) from aqueous solution using activated carbon prepared from N. microphyllum (AC-NM) as a new, cheap, and non-toxic. Design of experiments based on Response Surface Methodology (RSM) conducted to investigate the effect of variables namely; initial...

The biosorption of Cr (III), Zn (II) and Ni (II) ions from aqueous solution by dead blue algal biomass (Cyanophyta) was investigated in single metal system and batch conditions. Experimental parameters included contact time (0-140 min), pH (2-8), sorbent dose (0.1-2.0 g), initial concentrations (10...

Response surface methodology has been used to design experiments and to optimize the effect of independent variables responsible for higher adsorption of humic substances by activated carbon supported nanoscale zero-valent iron from aqueous solutions. The variables of initial concentration, time, pH...

In Mega-cities, such as Istanbul, urbanization causes heavy traffic. Air pollution, which originated from heavy traffic and industrialization, is one of the most important problems for the people who live in the populated cities. Due to both environmental and health effects, particulate matter...

A wide range of technologies has been developed for the removal of dyes from wastewaters to decrease their environmental impact. Wastewater containing dyes is generally treated using more than one process such as adsorption/biosorption. In this study, effects of initial pH (2-8), initial azo dye...