In this research, capability of adsorption of modified chitosan Nano composites with functionalized mesoporous silica which synthesized by electrospinning method in the removal of direct black ANBN dye has been studied. Silicate mesoporous were functionalized during synthesis process and then the...

An optical sensor for colorimetric detection of Cr(VI) has been synthesized by immobilizing 1,5-diphenylcarbazide (DPC) into alginate/pectin films. The addition of cationic surfactant (CTAB) was used to increase the effectiveness of DPC immobilization by forming hydrophobic-ion pairs. At optimum...

Hydrological and ecological role of wetlands were growing significant. Based on Landsat satellite remote sensing data collected in the years of 1990, 2000 and 2014, and integrating GIS with analytical methods of landscape ecology, research on changes of land use/cover and landscape pattern of...

The aim of this study was to optimize the removal of Naproxen (NPX) by the UV/ZnO photocatalytic process using response surface methodology based on Central Composite Design (CCD). The effect of parameters such as ZnO concentration, contact time, pH, temperature, and initial NPX concentration were...

Untreated wastewater can have important effects on the environment and human. The aim of the work was to evaluate the effectiveness of modified barley straw to remove malachite green from industrial wastewater. Studied variables were pH, contact time, initial malachite green concentration, and...

The long start-up time and high demand of anaerobic ammonium oxidation (anammox) limit the practical applications of the anammox process. In this study, granular sludge supported on activated carbon (AC) was used as seed sludge. The start-up time of the reactor was substantially shortened, and the...

In this work, the aryldiazonium salts radical addition method has been used successfully to anchor 8-hydroxyquinoline (8-HQ) moieties onto the surface of Amberlite XAD-4 beads. The nitroaniline aryldiazonium salt was generated (in-situ) and covalently grafted onto Amberlite XAD-4 by aid of...

One of the major challenges faced by researchers is to recycle industrial wastes in a manner that reduces their environmental impact in nature. An experimental study was carried out to determine the suitability of using chopped tire rubber as reinforcements in green and sustainable geopolymer...

Reactive Black 5 (RB5) dyes are a dye widely used in textile industries. The nanocatalytic ozonation of RB5 solution in the presence of pumice modified with nanoscale zero valent iron (nZVI) catalysts and pumice raw investigated in a laboratory scale batch reactor. The effects of solution pH (3-11)...

The present study analyses the various uncertainties and nonstationarity in the streamflow projections of Subarnarekha river basin in Eastern India using two widely used hydrological climate models: 1) general circulation model (GCM), and 2) forcing climate change scenarios. These two climate models...

Most of the major cities in our country are opposed to the problem of water pollution due to the uncontrolled leachate resulting from the decomposition of solid wastes in irregular landfills. The waste waters that have high nitrogen content such as leachate cause various problems like eutrophication...

The present study observed the removal of the organic content from the real effluent water produced by the oilfields. The proposed treatment process was the adsorption technique using the moringa peels as adsorbing agent. The effect of processing parameters such as adsorbent dosage, contact time and...

This study highlights the potential of steel slag, which is an industrial by-product of steel making industry as treatment media for metal-rich acid mine drainage (AMD). A series of batch adsorption studies has been done to demonstrate the effects of contact time, solution pH, initial concentration...

Abstract: Water is the main factor of movement and transport of pesticides and contamination of water by these pollutants is one of the most important challenges due to their widespread use and increased concentrations. Moreover, these compounds are on the U.S.EPA Priority Pollutant list because of...

Composite based Ca/Al layered double hydroxide and biochar was prepared using mixing coprecipitation method at pH 10. Composite and the starting materials was characterized using X-ray, FTIR, BET, thermal, and SEM-EDX analyses. Furthermore, composite was used as adsorbent of methylene blue from...

Laccase from Trametes versicolor was immobilized by covalent bonds formation on CPC silica carriers. Elimination of two floroqinolone (FQ); enrofloxacine (ENR) and flumequine (FLU) using laccase in both free and immobilized form in the absence and presence of 1-hydroxybenzotriazole (HBT) and 4...

In the present study, the NO2 removal efficiency at concentrations of 3000 to 5000ppm was evaluated by nickel and platinum bimetallic catalyst supported on multiwalled carbon nanotubes (Ni-Pt/MWCNT) along with water vapor at different space velocity and temperatures. Morphological and structural...

Constructed wetlands with a land-intensive, low energy and less operational requirement have been used as a sustainable green technology for treating wastewaters. But are constructed wetlands sustainable? The objectives of the present study are to evaluate one year monitored horizontal subsurface...

Two hydrological climate modelling techniques, general circulation model (GCM) and hypothetical climate change scenarios, were used to analyse the hydrological response to the anticipated climate change scenarios in the Subarnarekha river basin in Eastern India. Both models verified individually for...

One of the known methods for dye removing from waste water is using sorbent material for fine removal of dye .The nano- cation exchanger Sulphonated poly glycidyl methacrylate (SPGMA polymer) was used as sorbent material for removing one of the common cationic dyes. SPGMA polymer was prepared and...

Hydrological modeling of a watershed is necessary for water resources planning and management. The hydrology of upper Ribb watershed has been analyzed using spatially semi-distributed Soil and water assessment tool (SWAT) model. This study aimed to determine the water balance components and its...

Isotope mass balance in lake systems is strongly correlated with several climatic factors such as temperature, evaporation, precipitation and air moisture. On the other hand, the sedimentary budget of lake basins driven by climate, tectonic and/or human impact is an essential pool of environmental...

Metallurgy and recovery of gold in electronic waste sometimes involve the reduction of tetrachloroaurate ion (AuCl4-) to elemental gold form. Currently, for the reduction of tetrachloroaurate ion, people use reducing agents such as hydroquinone and sodium borohydride. Photocatalysts of Fe3O4/SiO2...

To discriminate the specific response of ion toxicity versus osmotic stress on altering leaf solute contents, contributing of organic and/or inorganic components in osmotic adjustment and its reflection on plant performances under ionic and osmotic stresses, two cotton (Gossypium barbadense L.)...

This paper presents an efficient, simple, and fast method for the derivatization, extraction, and preconcentration of several phenolic compounds (phenol, o–, m– and p–cresol, 4–chlorophenol, and 2–nitrophenol) from wastewater samples and analysis of those samples by gas chromatography–flame...