Permanent damages and spalling occur in conventional concrete due to high temperatures. Also concrete loses its compressive strength amounting to about 50 to 75% of the original strength as reported in most of the research works. As opting for high grade of concrete leads to higher costs and emits...

The process of making portland cement uses up a lot of resources and has a harmful environment effect since it produces a lot of greenhouse emissions. The by-product of the stone cutting and polishing industries is Bethamcharla waste Stone Powder (BWSP). Each industry produces an average of one...

Fly ash, solid waste from coal-fired power plant, had been utilized as raw material for porous geopolymer by alkaline activation and addition of hydrogen peroxide (H2O2) blowing agent. Porous geopolymer had higher surface area and total pore volume compared to fly ash and geopolymer without blowing...

Nowadays, the increase in population and industrial growth that generates lot of waste products which creates disposal problems and severe environmental hazards. The cement industry is one of the important sectors which liberates greenhouse gas such as carbon dioxide. The consumption of waste...

One of the major challenges faced by researchers is to recycle industrial wastes in a manner that reduces their environmental impact in nature. An experimental study was carried out to determine the suitability of using chopped tire rubber as reinforcements in green and sustainable geopolymer...

This study investigates the effectiveness of fly ash-based geopolymer concrete was conducted to be used as an alternative material to replace the normal concrete. The concrete mixture was prepared by mixing fly ash, fine aggregate, nano-slag, and SP in Na2SiO3/NaOH solution. The mixture was divided...

High strength geopolymers were produced from coal combustion fly ashes. These matrices reached compressive strength values over 100 MPa, much stronger and denser than obtained by using Portland Cement binders. Size fractions were obtained by size separation techniques and the relationship between...

Coal fly ashes and metallurgical slags are currently widely used as supplementary cementitious materials in production of Portland cement-based concretes. However, this application makes very poor use of the intrinsic reactivity of the glassy phases present in the waste materials, and can hardly...

The present paper aims to assess the effect of various additives on the compressive strength of inorganic polymers (geopolymers) synthesised using low Ca electric arc ferronickel slag and alkali activating solutions. The main operating parameters include pre-curing (48 hours), temperature (40 to 80...

This paper deals with the geopolymerization of the red mud generated in the primary aluminium production and the slag generated in the ferronickel production, in order to develop inorganic polymeric materials with advanced mechanical and physical properties. In particular, the effect of the main...