There is a relation between the environmental impacts to the high emissions in the environment and the natural resources depletion, which can be measured with the useful life of the products, affected by the manufacturing technologies and the sustainable development. In this background, the present...

When the whole earth is considered as a geographic place, it is clearly seen that the physical and social processes in the Earth’s crust have a direct or indirect connection with geography. In this century named information era, it is vital to find new solutions to people’s problems by getting...

One of the major challenges faced by researchers is to recycle industrial wastes in a manner that reduces their environmental impact in nature. An experimental study was carried out to determine the suitability of using chopped tire rubber as reinforcements in green and sustainable geopolymer...

The problem of air pollution is one of the most important problems faced by the world in the context of large urban agglomerations. Numerous activities are being undertaken all over the world to both counteract existing pollution and prevent the emergence of another one. Manufacturing is one of the...

Isotope mass balance in lake systems is strongly correlated with several climatic factors such as temperature, evaporation, precipitation and air moisture. On the other hand, the sedimentary budget of lake basins driven by climate, tectonic and/or human impact is an essential pool of environmental...

To discriminate the specific response of ion toxicity versus osmotic stress on altering leaf solute contents, contributing of organic and/or inorganic components in osmotic adjustment and its reflection on plant performances under ionic and osmotic stresses, two cotton (Gossypium barbadense L.)...

Wastewater from textile industry is considered one of the major environmental challenges due to the large volume of highly colored, polluted and toxic effluent. This study investigated the treatability of real textile wastewater by pilot-scale anoxic-aerobic Membrane Bioreactor (MBR) system without...

Reference evapotranspiration (ETo) is an important component in water resources, agricultural and environmental modeling, thus its assessment is critical in understanding the impacts of climate change on the sector of agriculture. In this study, the effect of climate change on reference...

The major environmental impact of discharge of excessive quantities of sulfate is the pollution of the surface and ground water supplies which can be harmful to life forms and therefore the need for an efficient treatment system arises. Biological sulfate reduction offers the advantage of less...

The objective of this work was to determine the composition and production rate of cytostatic pharmaceutical waste produced by Theagenion Cancer Treatment Hospital (TCTH) in Thessaloniki, Greece. This information is necessary for the design and costing of management systems for cytostatic...

The objective of the study is to determine accumulation and translocation of heavy metals from soil to paddy straw irrigated with urban sewage wastewater in peri-urban region of Girudhumal subbasin area in Madurai. The soil samples were collected in seven locations irrigated with treated and...

Odour emissions from industrial plants affect air quality and are consequently cause of a growing number of public complaints. The control of odour represents a key issue in plant management. The starting point for an effective odour control is their objective measurement. The electronic nose...

Odours are among the main causes of complaints in regards to environmental issues for a variety of plants, including landfills. The emissions from landfills can affect the quality of life and negatively influence the area nearby. To protect people living in the surroundings from excessive odour...

Natural diversity of intermittently closed and open lakes and lagoons (ICOLLs) depends on mutual interactions of several factors: (i) an impact of sea water and land background; (ii) temporary meteorological situation; (iii) hydrological conditions; and (iv) the shape of lake basin. However, some...

This study focuses on the impact of the disposal of Tirunelveli city municipal waste in the quality of groundwater in Ramayanpatti village where the waste is disposed; the study also assesses the quality of the groundwater suitability in irrigation in the disposed region. Tirunelveli city generates...

Particles with aerodynamic diameters 1 μm (PM1) damage human health more severely than do coarse particles. In this study, PM1 number concentration, traffic flow, temperature and relative humidity in both a residential underground garage and at the entrance/exit, wind velocity at the entrance/exit...

Sediments play an important role in the quality of aquatic ecosystems in the Dam Lake where they can either be a sink or a source of contaminants, depending on the management. This purpose of this study is to identify the sediment quality in order to find out the causes for the malodor and the...

Sulfur dioxide (SO2) emissions lead to negative environmental impacts and it is considered as an indicator for the larger group of gaseous sulfur oxides (SOx) in the air. In this paper, the dimethylamine (DMA) solution was used as the absorbent in a α-Al2O3 hollow fiber membrane contactor that is...

The aim of the present study is a) to examine the healthcare waste management practices in W. Greece, Peloponnese, Epirus and Ionian islands b) to investigate the implementation of the institutional frame and c) to make suggestions in order to achieve a proper Hospital Healthcare Waste Management...

Since sequential batch reactor (SBR) system is sequentially removes carbon, nitrogen and phosphorous in a single reactor by maintaining anoxic and aerobic stages, it recently has attracted a great deal of interest. This study evaluates the impact of wastewater treatment plant (WWTP) with a SBR...

A wide range of technologies has been developed for the removal of dyes from wastewaters to decrease their environmental impact. Wastewater containing dyes is generally treated using more than one process such as adsorption/biosorption. In this study, effects of initial pH (2-8), initial azo dye...

Carbon Capture and Storage (CCS) is an advanced technology that has the technical potential to provide dual advantages: (1) it helps countries maintain their hydrocarbon – driven economic advancement, such as Gulf Corporation Council countries (GCC) and (2) mitigating the negative effects of...

Salinity is a key environmental factor for the successful application of anammox technology in wastewater treatment, because it impacts the activity and the community structure of anammox bacteria. In this study, the changes in activity and population shifts of an anammox system response to the...

The production and use of biofuels such as ethanol have been the target of intensive research. One source of ethanol is corn, which is abundant in many countries. In producing ethanol from corn, an assessment of the environmental impact of the process is needed. This study intends to provide insight...

In order to move towards a more environmentally oriented economy, society needs to be aware and able to recognize environmental friendly practices. Firms are increasingly relying on environmental scores ratings to make strategic decisions. In this context, understanding how day-to-day company´s...