The present study observed the removal of the organic content from the real effluent water produced by the oilfields. The proposed treatment process was the adsorption technique using the moringa peels as adsorbing agent. The effect of processing parameters such as adsorbent dosage, contact time and...

This study highlights the potential of steel slag, which is an industrial by-product of steel making industry as treatment media for metal-rich acid mine drainage (AMD). A series of batch adsorption studies has been done to demonstrate the effects of contact time, solution pH, initial concentration...

Abstract: Water is the main factor of movement and transport of pesticides and contamination of water by these pollutants is one of the most important challenges due to their widespread use and increased concentrations. Moreover, these compounds are on the U.S.EPA Priority Pollutant list because of...

One of the known methods for dye removing from waste water is using sorbent material for fine removal of dye .The nano- cation exchanger Sulphonated poly glycidyl methacrylate (SPGMA polymer) was used as sorbent material for removing one of the common cationic dyes. SPGMA polymer was prepared and...

Synthetic dyes have a hurtful effect on human health and the environment. In this work, activated carbon was produced from date stones for use in elimination of methylene blue charged in aqueous solutions. Before that, the adsorbent was characterized by BET method, SEM, X-ray and TGA. The results of...

In this study activated carbon is produced from areca plant leaves, an agricultural waste material. The physical and chemical structural characterisation of the prepared carbon was carried out by FTIR, TGA and XRD analysis. FTIR study showed the presence of several functional groups, such as C=O, C...

Diplocyclos Palmatus biomass activated carbon (DPAC) was used in this work to remove lead (II) ion from the synthetic wastewater. The DPAC was characterized for structural, surface morphology by SEM, functional group was analyzed by FT-IR and XRD analysis. Removal of Pb2+ was studied by batch method...

Searching for low cost, accessible, simple implementation, and environmentally friendly adsorbents has been one of the concern of researchers in recent years. Therefore, the aim of this study was to investigate the efficient phenol removal from a synthetic aqueous solution using iron-coated pumice...

The intent of this research is the investigation of the nitrate reduction from aqueous solution using biomass (pine cone (PC) and PC activated carbon (PCAC)) – supported zero valent iron nanoparticles (PC-Fe0 and PCAC-Fe0). The synthesis of these nano-bio-composites was based on the reduction of...

Methylene blue is one of the most widely used dyes in various industries such as textiles and dyeing which, due to toxicity, causes several environmental problems as well as difficulties in wastewater treatment process. Therefore, many studies have been carried out on the removal of the dye from...

In this research, the Ag2CO3-PANI composite was synthesized with a simple precipitation method and then used as an effective adsorbent for adsorption of Methylene Blue cationic dyes from aqueous solution. Characterization of the adsorbent was carried out using UV–visible diffuse reflectance...

A facile strategy toward modification of aluminium filings (AF), a waste material from aluminium manufacturing industry, into a highly efficient adsorbent was examined. AF was simply treated with thermal modification to form a cheap adsorbent for Phosphorus (P) removal from aqueous solutions. The...

The present study investigated the possible effect of contact time, initial nickel concentration, and adsorbent concentration on removing Ni (II) ion, which is toxic to living organisms, from the aqueous media using nano zero valent iron (nZVI) and nano zero valent iron coated powdered activated...

The removal of Lead (II) from aqueous solutions using Fagopyrum esculentum Moench (Buckwheat) and Bambusa vulgaris (common bamboo) as adsorbents was investigated. The effects of various experimental parameters such as initial concentration, contact time and pH have been studied using batch...

In the present study, the adsorption of Remazol Brillant Green 6B (RBG 6B) on chitin which characterized by BET, FTIR, XRD and SEM analysis was studied. Response surface methodology (RSM) was applied to determine interaction between solution pH, initial RBG 6B concentration and chitin dosage being...

In this study, raw boron enrichment waste was treated with hydrochloric acid and ultrasound at 35-kHz frequency for 60 minutes. To optimize the adsorption conditions for removal of methylene blue (MB) from synthetic wastewaters using raw boron enrichment waste (BEW), acid modified boron enrichment...

Clay of the Middle Atlas Mountains region, Morocco, was used to investigate the removal of heavy metals ions (Cadmium and Copper) from aqueous solutions with respect to several experimental conditions including pH, contact time, initial solute concentrations, temperature and ionic strength. Kinetic...

This study was conducted to remove Methylene Blue (MB) from aqueous solution using activated carbon prepared from N. microphyllum (AC-NM) as a new, cheap, and non-toxic. Design of experiments based on Response Surface Methodology (RSM) conducted to investigate the effect of variables namely; initial...

Response surface methodology has been used to design experiments and to optimize the effect of independent variables responsible for higher adsorption of humic substances by activated carbon supported nanoscale zero-valent iron from aqueous solutions. The variables of initial concentration, time, pH...

A wide range of technologies has been developed for the removal of dyes from wastewaters to decrease their environmental impact. Wastewater containing dyes is generally treated using more than one process such as adsorption/biosorption. In this study, effects of initial pH (2-8), initial azo dye...

In this paper, the removal of Maxilon Red GRL by adsorption onto raw soil sample known as Niğde (Bor) grape molasses soil and Fe+2/H2O2 reagent as advanced treatment processes were investigated. The effects of various experimental parameters such as initial Fe+2 and H2O2 concentrations, pH...

The activated charcoal (AC) was synthesized from banana leaf rim (BLR) through three activation methods; physical (BLRC), chemical (Z BLRC, zinc chloride) and microwave activation (MW BLRC). The AC was characterized using fourier transform infrared spectrometer (FT-IR), Thermogravimetric analysis...

In this study, potential of okra leaves for the removal of Ni(II), Cu(II), Pb(II) and Cd(II) from the mixed metal aqueous solution were evaluated. The data were analyzed by Freundlich, Langmuir, D-R, Flory-Huggins and Halsey adsorption models. Pseudo first order rate, Pseudo second order rate...

Low concentrations of contaminants in rainwater is the primary benefit of transforming it as an alternative source of drinking water. However, treatment is necessary as rainwater collects contaminants that are persistent in the environment such as lindane and E.coli. The combination of...

The composite media, Zeliac TM was developed with the initial aim to provide low cost adsorbent with promising adsorption capacity. This study was conducted to investigate the removal of UV absorbance at 254 nm (UV 254) in Kerian river water using Zeliac TM as the media. Batch experiments study was...