The degradation of Remazol Black (RBB) by S-TiO2 photocatalyst was investigated. X-ray diffraction, fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and UV-vis specular reflectance spectroscopy has been used to characterize S-TiO2. The results...

Zinc tungstate (ZnWO4) photocatalyst was synthesized by precipitation method and treated with different non-thermal plasma to study its morphology, structure and photocatalytic activity. The X-ray diffraction results revealed that the plasma-treated ZnWO4 exhibited only wolframite structure and its...

The aim of this study was to optimize the removal of Naproxen (NPX) by the UV/ZnO photocatalytic process using response surface methodology based on Central Composite Design (CCD). The effect of parameters such as ZnO concentration, contact time, pH, temperature, and initial NPX concentration were...

Metallurgy and recovery of gold in electronic waste sometimes involve the reduction of tetrachloroaurate ion (AuCl4-) to elemental gold form. Currently, for the reduction of tetrachloroaurate ion, people use reducing agents such as hydroquinone and sodium borohydride. Photocatalysts of Fe3O4/SiO2...

Three different advanced oxidation processes (AOPs) were applied to investigate the removal of emerging contaminants (ECs) i.e. sulfamethoxazole (SMX), diclofenac (DCF) and carbamazepine (CBZ) in synthetically prepared solutions. The degradation of these substances was carried out by ozonation...

Photocatalytic abatement of o-xylene was investigated by immobilized ZnO on granular activated carbon (ZnO/GAC) under UV irradiation. Immobilization of ZnO increased the breakthrough time and removal capacity by 51 and 57%, respectively, in optimal conditions. The catalytic potential of the ZnO/GAC...

The objective of this study is to summarize studies and investigations about advanced oxidation processes (AOPs) used for the treatment of petroleum wastewater, which mainly contained oil, organic matter and other compounds. The big difference was shown in the specification of wastewater among the...

The present study was conducted to compare the performance of different solar photocatalytic processes (TiO 2 photocatalysis, photo-Fenton, photo-Fenton coupled with TiO 2 photocatalysis, and photo-Fenton coupled with TiO 2/ZnO photocatalysis) for the treatment of petroleum wastewater. The removal...

Low concentrations of contaminants in rainwater is the primary benefit of transforming it as an alternative source of drinking water. However, treatment is necessary as rainwater collects contaminants that are persistent in the environment such as lindane and E.coli. The combination of...

MB decolarization with pure TiO 2 and Ag doped TiO 2 based photocatalytic system were investigated under UV-A and UV-Visible conditions. Different ratios of Ag were used as metal dopant. 1% Ag-TiO 2 increased the decolorization efficiencies of MB and MO dyes, also the k app constant enhanced under...

The photocatalytic activity of Mn doped TiO 2 for the ozonation of tetradifon pesticide in aqueous solution was studied. Various loadings of catalysts Mn/TiO 2 (1%, 2.5% and 5%) was prepared and characterized by standard analytical techniques. Photocatalyzed ozonation with 2.5% Mn/TiO 2 yielded 100%...

In this study, the photocatalytic degradation of two biologically treated textile finishing wastewater was investigated using powdered TiO 2 and ZnO catalysts with UV-A lamp irradiation. Photodegradation and photodecolorization of the samples real textile industrial wastewater is observed directly...

Recently, the fate of emerging compounds in environmentally relevant samples has attracted considerable attention. Solar semiconductor photocatalysis may offer an appealing methodology to treat such contaminants. At the same time the use of solar photocatalysis for water and wastewater disinfection...

This work is aimed to select the best synthetic polymers available in the market with high transmittance in the TiO 2 activation range that can be coated with the semiconductor and withstand the photocatalytic oxidation conditions. Among eleven commercial organic polymers with different additives...

This paper examines the effect of humic acids (HA) and other solution constituents (Ca 2+, Mg 2+, Na +), frequently encountered in potable water sources, on the removal of a well-known herbicide, atrazine (ATR), by a laboratory-scale pilot Photocatalytic Membrane Reactor (PMR) system. Experimental...

Recently, considerable efforts have been devoted to overcome a major limitation in semiconductor photocatalysis, the recombination of photogenerated e --h + pairs which leads to reduced quantum yields. Considering the impacts of various parameters on the photocatalytic degradation efficiency, our...

Tubular halloysite clay mineral and nanocrystalline TiO 2 were incorporated in the preparation of nanocomposite films on glass substrates via sol-gel method at 450ºC. The synthesis involves a simple chemical method employing nonionic surfactant molecule as pore directing agent along with the acetic...

The photocatalytic degradation of caffeine has been investigated in aqueous suspensions of titanium dioxide (TiO 2) by monitoring process efficiency at varying TiO 2 (25 - 175 mg l -1) and initial drug concentrations (0.5 - 9.5 mg l -1). The use of the response surface methodology (RSM) allowed to...

Presence of antibiotics in the environment specially in aqueous environments is considered a major warning about health and environment. Thus, this study aims the efficiency of coupled process of Activated Carbon (AC) prepared from mango seed+ZnO under UV irradiation as an advanced oxidation process...

The effect of different operational parameters in UV/TiO2 process, such as initial dye concentration (20-50 mg l-1), light intensity (8-45 W m-2), pH (2.83-10.22), hydrogen peroxide concentration (100-500 mg l-1), temperature (21-45 ˚C) and photocatalyst concentration (150-900 mg l-1) were...

In the present study, the photocatalytic treatment of two synthetic textile dyehouse effluents was investigated. The first synthetic effluent (SE1) is a Remazol Black B aqueous solution, while the second one (SE2) is an aqueous mixture of sixteen dyes and auxiliary chemicals that are usually...

Heterogeneous photocatalysis is an advanced oxidation process (AOP) which has been widely studied by numerous researchers in the world and is used to degrade or remove a wide range of pollutants in water and air. The photocatalytic oxidation and mineralization of phenol in aqueous catalyst...

Photocatalysis is a promising method for eliminating the volatile organic compounds emitted from various industrial processes because mild or ambient conditions are used. Titanium dioxide is commonly used as photocatalyst and ultraviolet light is utilized for decomposing gas phase pollutants. In the...

C.I. Acid Orange 7 (AO7) commonly used as a textile dye and could be degraded by UV/ZnO, UV/H2O2 and UV/H2O2/Fe (III) (photofenton) processes. In the photocatalytic degradation of dye by UV/ZnO process, effect of some parameters such as UV irradiation time, presence of ZnO and UV irradiation, pH...

Silver doped TiO2 nanoparticles have been prepared by liquid impregnation (LI) and photodeposition (PD) methods and characterized by surface analytical methods such as scanning electron micrographs (SEM) and X-ray diffraction (XRD). The photocatalytic activity of silver doped TiO2 was tested by...