Sustainable Energy
The quest for efficient, sustainable solar energy solutions has propelled the exploration of novel materials with enhanced photovoltaic properties. This study delves into the synthesis, characterization, and photovoltaic application of cobalt-doped lead sulfide (PbCoS) quantum dots (QDs) deposited...
Water and wastewater treatment and reuse
The photocatalytic oxidation of organic and petroleum wastewater treatment is an advanced oxidation process (AOP) with several benefits. It operates at normal temperatures and pressure, is inexpensive, does not produce secondary waste, and us easily accessible. Many studies have employed bubble...
Water and wastewater treatment and reuse
Treatment of tannery effluent is a key issue that requires novel research. The presented work is an attempt to carry out advanced oxidation process in a Multi-orifice Oscillatory Baffled Column using ozone as oxidizer and compare the extent of treatment with sono-catalytic treatment with TiO2 as...
Water and wastewater treatment and reuse
As a widely used construction material, concrete is an ideal substrate for environmental functional materials. However, ordinary concrete lacks pollution resistance. When exposed to the natural environment, it is easily susceptible to microbial growth or organic contamination. Therefore, it is...
Water and wastewater treatment and reuse
Methyldimethylhydrazine and its by-products cause serious damage to human health. In this paper, Re3+-doped mesoporous TiO2 were synthesized for the photodegradation of UDMH. The structure, morphology and optical properties of photocatalyst were extensively characterized. The photocatalytic...
Water and wastewater treatment and reuse
The application of ceramic Nanofiltration (NF) membrane in brackish water treatment is increasing due to strict water quality standards. Ceramic NF is a widely used membrane process and has replaced reverse osmosis (RO) membranes in many applications due to lower energy consumption and higher flux...
Water and wastewater treatment and reuse
The photocatalytic process as an advanced oxidation process (AOP) has gained worldwide attention in the water and wastewater industry. The photocatalytic process can be used for water and wastewater disinfection. The aim of this study was to remove coliforms and faecal coliforms from real hospital...
Circular Economy and Bioeconomy
Water pollution has been acknowledged as an issue of concern due to recalcitrant pollutants like textile dyes. Therefore, the eco-friendly synthesis of nano-particles (NPs) through green chemistry approach from sources and materials of organic origin has not only enhanced the properties of substance...
Water and wastewater treatment and reuse
The current study work's contribution relates to the removal of xylene using an adsorbent with modified surfaces made from a naturally occurring substance called avocado seed. With the aid of a muffle furnace heated to 600⁰c, this was converted to become activated carbon. Activated carbon is...
Solid Waste Management
This research focuses on hydrothermal gasification (HTG) and hydrothermal liquefaction (HTL) studies to produce bio-hydrogen from domestic mixed waste. HTG and HTL studies were studied at temperatures of 300–450°C and 300–400°C, correspondingly, with a catalyst level of 6 wt %. The sol-gel technique...
Water and wastewater treatment and reuse
TiO2 is the most effective photocatalyst but it has low adsorption in the visible region. Many efforts have been done to improve its photocatalytic activity in the solar region. In this study we use Mo-oxy species supported on titania surface since it is well known that titania surface can dispersed...
Water and wastewater treatment and reuse
Conducting poly(o-toluidine) (POT)/titanium dioxide (TiO2) nanocomposite have been synthesized by in situ chemical oxidation polymerization of o-toluidine in the presence of TiO2 nanoparticles. The various composites were synthesized by changing the percentage load of titanium dioxide nanoparticles...
Water and wastewater treatment and reuse
Poultry slaughterhouse wastewater (PSWW) is a crucial concern fundamentally due to extensive generation and related substantial amounts of recalcitrant organic content due to high COD and oil and grease (O&G) levels. Hybrid advanced oxidation processes are promising, green, and innovative options to...
Water and wastewater treatment and reuse
We propose a simple method for synthesising Poly(azomethine), ZnO, TiO2, poly(azomethine)/TiO2, and poly(azomethine)/ZnO nanocomposites using an ultrasonication process, as well as the use of these nanomaterials for photocatalytic degradation of organic dyes (Methylene blue (MB), malachite green (MG...
Environmental management and policy
TiO2 nanomaterials have gained much interest due to their importance of wide area application. In this study, TiO2 nanocomposites were modified with Ag NPs by the stober method. The synthesized nanocomposites were characterized by XRD, FTIR, scanning electron microscope (SEM) and energy dispersive X...
General
The nanocomposites of poly(o-chloroaniline) with titanium dioxide have been prepared via chemical oxidative polymerization technique using o-chloroaniline monomer and titanium dioxide nanoparticles for photocatalytic application. The different composites were prepared by varying the load percentage...
Water and wastewater treatment and reuse
The degradation of Remazol Black (RBB) by S-TiO2 photocatalyst was investigated. X-ray diffraction, fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and UV-vis specular reflectance spectroscopy has been used to characterize S-TiO2. The results...
Water and wastewater treatment and reuse
Metallurgy and recovery of gold in electronic waste sometimes involve the reduction of tetrachloroaurate ion (AuCl4-) to elemental gold form. Currently, for the reduction of tetrachloroaurate ion, people use reducing agents such as hydroquinone and sodium borohydride. Photocatalysts of Fe3O4/SiO2...
Water and wastewater treatment and reuse
This report was aimed at an investigation of efficiency for Photochemical Advanced Oxidation Processes (UV photolysis, UV/H2O2, UV/TiO2, UV/H2O2/TiO2 and UV/H2O2/Fe2+ processes) to decolorize Malachite Green Oxalate (MGO) dye. Experimental runs were performed using laboratory scale photochemical...
Water and wastewater treatment and reuse
The aim of this study is to investigate the performance of solar photo-catalyst of titanium oxide (TiO2/Solar) process to treat rainwater. The polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) in rainwater were chosen to be investigated in this study. The rainwater...
Water and wastewater treatment and reuse
The aim of this study is to investigate the performance of the solar photocatalyst of TiO2/ZnO/Fenton process to treat the refinery wastewater and remove inorganic carbon (IC) which potentially toxic to human, aquatic and microorganism life. Central composite design with response surface methodology...
Water and wastewater treatment and reuse
The present study was conducted to compare the performance of different solar photocatalytic processes (TiO 2 photocatalysis, photo-Fenton, photo-Fenton coupled with TiO 2 photocatalysis, and photo-Fenton coupled with TiO 2/ZnO photocatalysis) for the treatment of petroleum wastewater. The removal...
Air pollution and health
V 2O 5-WO 3/TiO 2 catalysts were fabricated by a simple impregnation method. Effects of V 2O 5 and WO 3 loadings on the catalytic performance of V 2O 5-WO 3/TiO 2 catalyst for selective catalytic reduction (SCR) of NO with NH 3 were investigated. Morphology and structure of the V 2O 5-WO 3/TiO 2...
Water and wastewater treatment and reuse
Most of water sources throughout the world contain natural organic matter (NOM), which is the best description as a complex mixture of organic compounds. The effect of iron ion on removal efficiency of dissolved organic carbon (DOC) using UV/TiO 2 photo catalytic oxidation (TiO 2) was examined. In...
Water and wastewater treatment and reuse
MB decolarization with pure TiO 2 and Ag doped TiO 2 based photocatalytic system were investigated under UV-A and UV-Visible conditions. Different ratios of Ag were used as metal dopant. 1% Ag-TiO 2 increased the decolorization efficiencies of MB and MO dyes, also the k app constant enhanced under...