The packed bed column study investigated the removal of toxic metal ions (Cr, Pb & Zn) using rice husk coated with iron oxide nanoparticles as an adsorbent material. The chemical fusion process prepared the nanomaterial adsorbent, and iron oxide capping provides stability to the prepared nano...

Biochar was synthesized from Kappaphycus alvarezii reject (KR) remove the anionic azo dye, Acid Red 88 from wastewater. In this study, biochar was experimented in both batch and column adsorption studies. Batch adsorption studies were performed at varying temperature (25 – 40 °C), dosage (1 – 10 g)...

The present communication attempts to explore the adsorption potential of Mixed Fruit Peel Waste (MFPW) to remove Sunset Yellow FCF dye from an aqueous solution. The MFPW is a low-cost adsorbent prepared from the peels orange, watermelon and banana. The characterization of MFPW was made through FTIR...

Adsorption of heavy metal ions (Cr, Pb & Zn) using prosopis julyflora roots has been investigated by batch adsorption and fixed bed column process. The various properties of adsorbent were analysed and the FT-IR spectra & SEM studies of prosopis julyflora powder, before and after adsorption of metal...

In the present work, corn stalk was used as a low cost adsorbent for removal of anionic dye (" CBB"). Corn stalk was treated with two methods to inform Modified corn stalk with magnetic particles (MMCS) and Modified corn stalk with sulfuric acid (SMCS). Comparison between raw and treated corn stalk...

In this research, capability of adsorption of modified chitosan Nano composites with functionalized mesoporous silica which synthesized by electrospinning method in the removal of direct black ANBN dye has been studied. Silicate mesoporous were functionalized during synthesis process and then the...

Untreated wastewater can have important effects on the environment and human. The aim of the work was to evaluate the effectiveness of modified barley straw to remove malachite green from industrial wastewater. Studied variables were pH, contact time, initial malachite green concentration, and...

This study highlights the potential of steel slag, which is an industrial by-product of steel making industry as treatment media for metal-rich acid mine drainage (AMD). A series of batch adsorption studies has been done to demonstrate the effects of contact time, solution pH, initial concentration...

Abstract: Water is the main factor of movement and transport of pesticides and contamination of water by these pollutants is one of the most important challenges due to their widespread use and increased concentrations. Moreover, these compounds are on the U.S.EPA Priority Pollutant list because of...

Composite based Ca/Al layered double hydroxide and biochar was prepared using mixing coprecipitation method at pH 10. Composite and the starting materials was characterized using X-ray, FTIR, BET, thermal, and SEM-EDX analyses. Furthermore, composite was used as adsorbent of methylene blue from...

In this study, the potential textile dye biosorption capacity of a low-cost biosorbent (P. animale) was tested as functions of pH, biosorbent type, initial dye concentration, temperature, contact time and biosorbent dosage at batch scale level. The optimal conditions are 2, dried biosorbent, 93.16...

This paper describes the adsorption of Al3+ ions from aqueous solutions, by natural clay (from Sakarya's Yenigün district) and coconut shell modified by means of acid treatment. Batch experiments were carried out to determine the effect of various factors such as initial pH (4-9), temperature (20...

In this study activated carbon is produced from areca plant leaves, an agricultural waste material. The physical and chemical structural characterisation of the prepared carbon was carried out by FTIR, TGA and XRD analysis. FTIR study showed the presence of several functional groups, such as C=O, C...

The aim of this study was to evaluate the mercury removal from aqueous solutions by using L-Cysteine functionalized Multi-walled Carbon Nanotubes. The effect of pH, adsorbent dose, contact time and mercury concentration in removal efficiency was evaluated. Multi -walled carbon nanotubes were...

Searching for low cost, accessible, simple implementation, and environmentally friendly adsorbents has been one of the concern of researchers in recent years. Therefore, the aim of this study was to investigate the efficient phenol removal from a synthetic aqueous solution using iron-coated pumice...

The intent of this research is the investigation of the nitrate reduction from aqueous solution using biomass (pine cone (PC) and PC activated carbon (PCAC)) – supported zero valent iron nanoparticles (PC-Fe0 and PCAC-Fe0). The synthesis of these nano-bio-composites was based on the reduction of...

Methylene blue is one of the most widely used dyes in various industries such as textiles and dyeing which, due to toxicity, causes several environmental problems as well as difficulties in wastewater treatment process. Therefore, many studies have been carried out on the removal of the dye from...

In this research, the Ag2CO3-PANI composite was synthesized with a simple precipitation method and then used as an effective adsorbent for adsorption of Methylene Blue cationic dyes from aqueous solution. Characterization of the adsorbent was carried out using UV–visible diffuse reflectance...

A facile strategy toward modification of aluminium filings (AF), a waste material from aluminium manufacturing industry, into a highly efficient adsorbent was examined. AF was simply treated with thermal modification to form a cheap adsorbent for Phosphorus (P) removal from aqueous solutions. The...

The objective of this study is to examine the ability of a compost material for removing {Cu}^{2+} from aqueous solutions with different parameters using continuous fixed-bed column. Compost was characterized by using Fourier transform infrared spectroscopy which revealed that the metal binding is...

Removal of Co(II) ions from aqueous solutions using chitosan-vanillin (polymer I) and chitosan-ortho-vanillin (polymer II) adsorbents has been investigated under different experimental conditions. The effect of pH, contact time, adsorbent mass, temperature, and initial concentration of studied ion...

The present study investigated the possible effect of contact time, initial nickel concentration, and adsorbent concentration on removing Ni (II) ion, which is toxic to living organisms, from the aqueous media using nano zero valent iron (nZVI) and nano zero valent iron coated powdered activated...

The removal of Lead (II) from aqueous solutions using Fagopyrum esculentum Moench (Buckwheat) and Bambusa vulgaris (common bamboo) as adsorbents was investigated. The effects of various experimental parameters such as initial concentration, contact time and pH have been studied using batch...

Clay of the Middle Atlas Mountains region, Morocco, was used to investigate the removal of heavy metals ions (Cadmium and Copper) from aqueous solutions with respect to several experimental conditions including pH, contact time, initial solute concentrations, temperature and ionic strength. Kinetic...

In this study, dehydrated cottonseed cake as a low-cost and abundant byproduct in Turkey was utilized as an adsorbent for the decolorization of Reactive Blue 19 (RB19) and Reactive Yellow 145 (RY145) from aqueous solutions based on adsorption and ultrasound-assisted adsorption (UAA). Decolorization...