An economic system focused on low energy usage, low pollution, and low emission is known as a "low-carbon economy". The concept of environmentally friendly and low-carbon food packaging architecture directs practice growth and reform in accordance with the customer's green psychology. As the primary...

In concrete industry, the use of concrete solid wastes is becoming further common since it can minimize associated costs and environmental implications. The current research looks at how concrete performs when polypropylene (PP) plastic, produced from pollution garbage items, is used as a partially...

Diesel engines cause major pollutants such as hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx). These emissions affect environmental systems and lead to global warming and climatic change effects. These pollutants also affect humans and lead to health problems like lung cancer...

Nowadays, due to the development of the world, harmful gases and vapours have begun to enter the atmosphere significantly, so we are faced with the problem of air pollution and its low quality. This paper, therefore, focused on enclosed car parks, a parking system that needs to be well examined from...

Recent studies have indicated that PAEs (phthalic acid esters) are significant environmental pollutants with carcinogenic, teratogenic, and mutagenic effects. Urban soils can act as both a source and sink for city contaminants. This paper takes Changji, Xinjiang in Northwest China as the study area...

Gaseous emissions of biowaste treatment facilities have several adverse effects. In Germany, a law to collect biological waste separately was introduced in January 2015. Since then there is a discussion about greenhouse gases which could be emitted in a significant rate and exceed the positive...

In this study, 55 ozone precursor VOCs, which are routinely measured in PAMS (Photochemical Assessment Monitoring Station) were measured in a suburban station located at Middle East Technical University, Environmental Engineering Department in, Ankara. Daily air samples were collected in evacuated...

In Mega-cities, such as Istanbul, urbanization causes heavy traffic. Air pollution, which originated from heavy traffic and industrialization, is one of the most important problems for the people who live in the populated cities. Due to both environmental and health effects, particulate matter...

The problem of reducing CO2 emissions from transport, a major contributor to the greenhouse effect, has become a growing concern for the scientific community and various international committees monitoring climate change. Energy savings in the transport sector are a key factor towards rational...

The activated charcoal (AC) was synthesized from banana leaf rim (BLR) through three activation methods; physical (BLRC), chemical (Z BLRC, zinc chloride) and microwave activation (MW BLRC). The AC was characterized using fourier transform infrared spectrometer (FT-IR), Thermogravimetric analysis...

The production and use of biofuels such as ethanol have been the target of intensive research. One source of ethanol is corn, which is abundant in many countries. In producing ethanol from corn, an assessment of the environmental impact of the process is needed. This study intends to provide insight...

The heavy metals contained in sediments may be responsible for constant degradation of rivers’ water quality, which circulate in an urban environment. Therefore, this study shows the pollution index and enrichment factor for each of these elements in river sediments. It was used the optical emission...

Denitrifying polyphosphate accumulating organisms (DNPAOs) are very promising for simultaneous nitrogen and phosphorus removal. While during denitrification, emission of a greenhouse gas, nitrous oxide (N 2O), may occur. In this study, DNPAOs were enriched in a lab-scale reactor, and N 2O emission...

A high efficient nitrite based double-sludge system combining sequential denitrification and nitritation reactors has been developed to remove nitrogen from wastewaters containing high concentrations of ammonium. System performance was examined and also nitrous oxide (N 2O) emission was measured...

ISC-Aermod view dispersion model has been used to study the ground level concentration of hydrocarbon (HC). The purpose was to predict the air quality effects from off-grid diesel power generators operated by a textile factory in Lagos, Nigeria on its host airshed. Emissions from 22 point sources in...

Non-point sources pollution from highway runoff is among the most important reasons for surface and ground waters degradation. Atmospheric deposition, exhaust emissions, pavement wear and tire wear all have been found to be crucial pollutants in highway runoff. The most critical pollutants included...

The aim of this research is to study the behavior of different forest species in accordance with their ability to retain heavy metals on their leaves in order to select the most suitable species for urban and peri-urban use, which will contribute to the reduction of the continuously growing...

This paper analyzes the potential contribution of electric vehicles in greenhouse gas (GHG) emissions reduction over the next decade following a simulation procedure. Emissions were assessed through a stepwise methodological approach at the transportation link level in the Hamilton Census...

Cement production is an energy-intensive process. Utilisation of fossil fuels is common practice in the cement industry around the world. Alternative fuel substitution rates increase every year. More specifically, 18 % of the fuel used by the European cement industry in 2006 consists of alternative...

The aim of this study, which took place in a dental environment located at the centre of Athens, Greece, is to quantify the amount of Total Volatile Compounds (TVOCs), which were emitted from commonly used dental substances in a controlled dental micro-environment (8 surface disinfectants including...

Quantifying the contribution of individual sources to air pollution in one area is the first essential step in managing air quality in this region. This is of great interest especially in areas with combined urban and industrial emission sources. The area of Western Macedonia is a very complex in...

This study investigates the partition of heavy metals in slag from the rotary kiln (SL), second combustion chamber ashes (SCCA), filter cake (FC) from a bag filter and flue gas (FG) emissions (both in particulate and gas phases) of the Istanbul medical waste incinerator (ISTAC). Eleven targeted...

The ENVIRON model estimates environmental impacts (positive, negative) from the introduction and use of Advanced Communications (AC); Information Society Technologies (IST) in industrial, commercial and business sectors in Greece. The model estimates effects on output, employment, income...

The aim of this paper is to identify the factors that have influenced changes in the amount of carbon dioxide (CO2) emitted from the Greek manufacturing sector as a whole and from three representative subsectors. By means of an algebraic decomposition method the changes recorded during the period...

The conventional landfilling does not promote sustainable waste management due to uncontrolled emissions which potentially degrade the environment. In this regard, pre-treatment of municipal solid waste prior to landfilling significantly enhance waste stabilization and provides various advantages...