From this study, green seaweed Caulerpa Scalpelliformis is utilized as a sorbent for the removal of three metals such as lead (Pb), nickel (Ni) and zinc (Zn). Adsorption tests showed that maximum removal efficiency of 75.02% for Pb, 80% for Ni and 91.11% for Zn was obtained at an optimal equilibrium...

In the present study, nanocellulose was successfully extracted from durian husk via chemical treatment and then characterized by several analytical techniques, involving X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDX) and...

Developing an efficient sorbent for removing the highly toxic Cr(VI) is very important, which tackles the threat of Cr(VI) pollution to ecological environment and human health. Herein, a cationic covalent organic framework bearing cationic guanidine (named TATGCl) was synthesized from...

The reduction of highly toxic Cr (VI) from industrial wastewater of low concentration by different low-cost ample sorbent materials was investigated. In order to remove Cr (VI) from aqueous solutions, the biosorption properties of natural waste (Betel Seeds) were investigated with varying several...

The development of magnetic sorbent for dispersive solid-phase micro-extraction (DmSPE) often requires lengthy multi-step reactions. This research revealed a simplified method for preparing magnetic sorbent for the DmSPE using poly(4-vinylphenol) (PVP). The magnetic sorbent (PVP@MNP) was prepared by...

In this study, preliminary experiments were conducted to investigate the sorption potential of different organic micropollutants to polystyrene and polyethylene and to examine the removal efficiency of these microplastics during coagulation experiments with iron and manganese coagulants. For the...

In the present study the sorption efficiency of okra leave sorbent for As(III) and As(V) is demonstrated. Sorption reaction is pH and time dependent. The sorbent shows maximum removal of As(III) and As(V) at pH 7 and pH 6 respectively and equilibrium was achieved at 180 minutes. In isotherm study...

In this work, the aryldiazonium salts radical addition method has been used successfully to anchor 8-hydroxyquinoline (8-HQ) moieties onto the surface of Amberlite XAD-4 beads. The nitroaniline aryldiazonium salt was generated (in-situ) and covalently grafted onto Amberlite XAD-4 by aid of...

Oil spill cleanup is a complex and expensive activity. There are several commonly used techniques available today. The paper suggests criteria for the selection of the best available technique that could be employed in case of oil spills in the Mediterranean Sea under specific circumstances, i.e...

One of the known methods for dye removing from waste water is using sorbent material for fine removal of dye .The nano- cation exchanger Sulphonated poly glycidyl methacrylate (SPGMA polymer) was used as sorbent material for removing one of the common cationic dyes. SPGMA polymer was prepared and...

New challenges for industrial microbiology and biotechnology of algae are to increase the efficiency of microalgae growth rates and decrease the cultivation costs. Algae could be cultivated in fresh water as well as in salty sea water or wastewater. Microalgae biomass can be used as a sorbent to...

The intent of this research is the investigation of the nitrate reduction from aqueous solution using biomass (pine cone (PC) and PC activated carbon (PCAC)) – supported zero valent iron nanoparticles (PC-Fe0 and PCAC-Fe0). The synthesis of these nano-bio-composites was based on the reduction of...

In this research, the Ag2CO3-PANI composite was synthesized with a simple precipitation method and then used as an effective adsorbent for adsorption of Methylene Blue cationic dyes from aqueous solution. Characterization of the adsorbent was carried out using UV–visible diffuse reflectance...

The biosorption of Cr (III), Zn (II) and Ni (II) ions from aqueous solution by dead blue algal biomass (Cyanophyta) was investigated in single metal system and batch conditions. Experimental parameters included contact time (0-140 min), pH (2-8), sorbent dose (0.1-2.0 g), initial concentrations (10...

In last decades the search for new low cost sorbents that have heavy metal ions binding capabilities is a hot topic in the field of clean-up technologies. In this study, wastes of Romanian silver tree ( Abies alba) bark were explored for first time as green and economical sorbent for the removal of...

The aim of the present study was to synthesize a sorbent, for arsenic removal from aqueous solutions, reusing two waste materials (slag and red mud). The sorbent was prepared after chemical and thermal treatment, during which amorphous silica sol and FeOOH sol were produced simultaneously and form...

Cerium oxide (CeO 2) nanoparticles (NPs) were used for the removal of cadmium (II), lead (II) and chromium (VI) ions in single aqueous solutions and in solutions with mixtures of the three metals. The adsorption studies were carried out at pH 5 and 7 using a systematic factorial experimental design...

The utilization of three novel and distinct agricultural waste materials, namely casuarina fruit powder (CFP), sorghum stem powder (SSP) and banana stem powder (BSP) as low cost adsorbents for reducing chemical oxygen demand (COD) levels of coffee industry wastewater has been examined. Prepared...

Attrition of limestone particles in bubbling fluidized bed has significant influence on cyclic CO 2 capture ability of sorbents. The limestone particle attrition and size distribution characteristics were investigated experimentally in a bench scale fluidized bed. The effects of initial particle...

In the present study, batch adsorption studies were performed for the removal of malachite green and acid blue 161 dyes from aqueous solutions by varying parameters such as contact time, waste marble dust amount, initial dye concentration and temperature. The equilibrium adsorption data were...

This study was aimed to investigate the use of Mustard stalk as a cheap, eco-friendly adsorbent with support matrix for the immobilization of microbial cell and for subsequent removal of 2,4-dichlrophenol(2,4-DCP) from waste water. A comparative batch study between adsorption as well as simultaneous...

Removal of Al 3+ and Mn 2+ from solution by Trichoderma asperellum BHU216 immobilized on Irvingia gabonensis matrix in a batch system was investigated. Effect of biosorption conditions contact time, pH, bead size and spore load were studied. Equilibrium isotherms and re-usability of biosorbent were...

Two novel materials have been developed and tested in initial studies for the in-situ generation of sorption and reactive barriers for subsurface water treatment at low cost by introducing sorbents or reagents via injection wells. Both materials are based on finely-ground activated carbon with a...

The ability of activated carbon and different low-cost by-products and waste material as sorbents to remove various reactive dyes from aqueous solutions and wastewaters was investigated. All aqueous dye solutions contained 2,000 mg l-1 NaCl, to mimic real dye wastewater. Batch kinetic and isotherm...