Simultaneous PM 10 and PM 2 .5 sampling was conducted for a six months period, at two sites of different characteristics. The first site was located in an urban background location in the North-Eastern part of GAA, affected by primary emission sources and particle transport from other parts of the...

Several adsorbents have been tried out by researchers to remove different pollutants from wastewater. However, the adverse effect of these biosorbents on the treated water and the possibility of leaching new pollutants to the treated water have not been investigated. A batch technique was employed...

In this work, the stopping power due to free and bound electrons in a plasma target is analyzed for two different kinds of projectile, protons and alpha particles. The stopping of free electrons is calculated using the dielectric formalism, well described in previous literature. In the case of bound...

A set of experiments have been carried out in a heavy duty single cylinder engine using high EGR rates and different start of injection angles ( SOI). Three different fuels (conventional diesel fuel, a diesel-ethanol mixture (e-diesel) and a Fischer-Tropsch fuel (GTL)) have been tested in order to...

This study was aimed to investigate the use of Mustard stalk as a cheap, eco-friendly adsorbent with support matrix for the immobilization of microbial cell and for subsequent removal of 2,4-dichlrophenol(2,4-DCP) from waste water. A comparative batch study between adsorption as well as simultaneous...

PM 2.5 samples were collected from the exhaust stacks on the roofs of a university canteen, a charcoal-grilled chicken restaurant and a wood-oven roasted piglet restaurant. The use of thick exhaust hood filters and also gas and electricity as energy sources for cooking in the kitchen of the...

A method is presented and preliminarily applied to the optimization of the allocation of oil-slick combating coastal stations in a coastal basin. The decision support methodology is based on the annual simulation of the circulation in the basin according to climatologic data, on the oil spill...

Tubular halloysite clay mineral and nanocrystalline TiO 2 were incorporated in the preparation of nanocomposite films on glass substrates via sol-gel method at 450ºC. The synthesis involves a simple chemical method employing nonionic surfactant molecule as pore directing agent along with the acetic...

In this paper, the effects of the mixing ratio and particle size of coal were investigated using a thermogravimetric analysis (TGA). A method of Achar-Brindley-Sharp-Wendworth (ABSW) was applied to a simultaneous calculation of the kinetic parameters (including the apparent activation energy, the...

Iron oxide materials were synthesized by an easy and rapid hydrothermal method using different iron precursors (FeCl 3∙6H 2O, Fe(NO 3) 3∙9H 2O and K 4Fe(CN) 6∙3H 2O), solution pHs (acid and basic) and reaction times (3 h and 6 h). The synthesized materials were thoroughly characterized by...

The production of bio-pellets is an alternative to add value to the residual biomass of the oil palm-extraction process. In this work, an experimental study of the pelletising process of oil palm residual biomass blends is presented. An experimental full factorial design that uses as factors the...

Investigation of open channel flows is very important for a wide range of applications, including restoration and enhancement of river aquatic systems. As a result, the scientific community has focused on providing further insights on the flow characteristics in vegetated channels. Vegetation may be...

The effect of different operational parameters in UV/TiO2 process, such as initial dye concentration (20-50 mg l-1), light intensity (8-45 W m-2), pH (2.83-10.22), hydrogen peroxide concentration (100-500 mg l-1), temperature (21-45 ˚C) and photocatalyst concentration (150-900 mg l-1) were...

This study aimed to evaluate the sorption capability of an inexpensive and easily available Moroccan clay, called locally Ghassoul, to remove Rhodamine B (Rh-B) from aqueous solution. Experimental results showed that the equilibrium sorption data fitted well with the Langmuir isotherm and the...

The aim of this study was to compare particulate matter (PM) pollutants performed at three different enclosed parking garages (A, B and C) and two streets (1 and 2) in Belgium. Particle mass concentrations, number concentrations and their size distributions were measured in real time using an...

The impacts of wind conditions to fine and coarse particle mass concentrations at four European urban centers, by multivariate regression analysis of particle measurements against categorized wind (direction and speed) conditions were estimated. Statistically significant associations (both positive...

Abstract Spatial and temporal variation of fine particulate pollution in a complex small coastal city, Macau, was investigated by using a mobile air quality monitoring platform. Real-time street level measurements of aerosol size distribution were carried out three times per day by using an on-board...

Literature reports have indicated that Particulate Matter (PM) concentrations in the atmosphere over the major urban centres of Greece are high compared to other European cities of the same size. The great majority of these reports are based on measurements that have been conducted over a limited...

A field study on the impact of fireplace on the indoor air quality was carried out between 2004 and 2006, where two main contaminants, CO and particulate matters, were investigated in twenty seven randomly selected Irish houses. The results show that while the physical environment has been improved...

The purpose of the present work was to study experimentally the indoor air quality status regarding PM10, PM2.5, TVOCs, CO2, NOx, SO2 and O3 in selected differently used areas. A flat on the third floor of a multi-storey building, located at a suburban area north-east of the centre of Athens and...

The PM10 airborne particle samples were collected at Shanghai from December 2003 to December 2005 in order to investigate platinum contamination in the urban air. The samples were analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The results show that the average Pt concentration in...

This study reports particulate matter levels of various size fractions (PM10, PM2.5, and PM1) and identify their controlling factors, in various locations over Greece. It combines long-term data sets involving particle concentrations as measured in the island of Crete in the Eastern Mediterranean...

In this study, the relationship between inhalable particulate (PM10), fine particulate (PM2.5), coarse particles (PM2.5-10) and meteorological parameters such as temperature, relative humidity, solar radiation, wind speed was statistically analyzed and modeled for the urban region of Patras during...

The present paper aims at a treatment technique designed for special industrial wastewaters contaminated with only traces of halogenated organic compounds (HOCs) – concentrations which are nevertheless large enough to make a discharge into municipal sewage works impossible. Our research follows the...

Two novel materials have been developed and tested in initial studies for the in-situ generation of sorption and reactive barriers for subsurface water treatment at low cost by introducing sorbents or reagents via injection wells. Both materials are based on finely-ground activated carbon with a...