In order to make assessments in understanding of physiological and genotoxic effects of imposing cadmium (Cd) on photosynthetic pigment contents along with the changes occurring in genetic material of Kalanchoe plants were used in relation to various Cd-treatments. Young plantlets were originated...

A comparative economic and life cycle based analysis of five management scenarios for the solid waste generated in the island of Syros was conducted. The LCA part was performed with the LCA – IWM software. The four on-site waste management scenarios were: i) source separation of recyclable materials...

Jarosite waste released from the zinc production process during the hydrometallurgical leaching of concentrates in Trepça lead-zinc smelter, Kosovo has serious environmental problems due to the presence of toxic metals such as Pb, Cd, Zn, As etc. Its disposal in open tailing damps has become a major...

Biosorption is an emerging technique for water treatment utilizing abundantly available biomaterials.The potential feasibility of magnetic peanut hulls particle for removal of cationic dye (methylene blue) from aqueous solution was investigated. The effects of various experimental parameters were...

This study presents an evaluation of diatomite as a low cost adsorbent for Pb (II) removal from aqueous solutions under various conditions. The results demonstrate that adsorption of Pb (II) is strongly dependent on the pH of the solution. The effect of pH on adsorption of Pb (II) on diatomite was...

Cerium oxide (CeO 2) nanoparticles (NPs) were used for the removal of cadmium (II), lead (II) and chromium (VI) ions in single aqueous solutions and in solutions with mixtures of the three metals. The adsorption studies were carried out at pH 5 and 7 using a systematic factorial experimental design...

An engine industry from Caxias do Sul city (RS, Brazil) has developed tests with biofuels to adapt their products to new fuel trends. Thus, this study aims to examine the components of their engines with potential degradation in the biodiesel usage. The most important aspects that were studied...

In this study, Kandira stone, extensively used as a cladding material for building stone has been examined for the removal of an antibiotic Ciprofloxacin hydrochloride (CIP) from its aqueous solution. Batch experiments were performed to investigate the adsorption kinetics, equilibrium and...

The utilization of three novel and distinct agricultural waste materials, namely casuarina fruit powder (CFP), sorghum stem powder (SSP) and banana stem powder (BSP) as low cost adsorbents for reducing chemical oxygen demand (COD) levels of coffee industry wastewater has been examined. Prepared...

This study represents new research on the sunflower ( Helianthus annuus L.) including new data on arsenic contents in Ergene River Basin. In this study, the concentrations of arsenic in soil and sunflower plant have been investigated. The area has suffered significant pollution as a result of...

This paper reports the synthesis and the investigation of the properties and performance of Fe-Al catalysts modified with Cu or Co for the steam reforming of ethanol. The materials were prepared by the precipitation method with different Fe/Al ratios. The samples were characterised by the S BET, TG...

In this work, we performed a detailed full cost accounting for 7 types of existing and planned municipal solid waste management facilities (sanitary landfills, anaerobic digestion, biodrying, incineration, aerobic mechanical and biological, material recovery and waste transfer stations) in Greece...

Thermogravimetric analysis combined with a mass spectroscopy detector was used to study the thermal stability of solid materials earmarked for processing by thermal desorption (for example during the amelioration of environmental damage). The objective of the study was to verify the applicability of...

The urban planning, the buildings and covering materials of all surfaces, the distance between adjacent constructions, the height and the orientation of the buildings are some of the factors which affect the sustainable conditions in the city. This paper presents a project that aims at investigating...

In this work, three samples of nitrogen-doped TiO 2 prepared at different calcination temperatures (400, 450 and 500 °C) were applied for the adsorption of Direct Black 38. Kinetic studies about the adsorption of Direct Black 38 on nitrogen-doped TiO 2 were performed under different initial dye...

Iron and steel industry generates substantial amount of inorganic solid wastes namely blast furnace (BF), Linz-Donawitz (LD) slag from the metallurgical process and fly ash from thermal power plant which creates environmental pollution when dumped in open land. In this investigation, BF and LD slag...

Currently there is a big interest to increase the sources of alternative fuels for aviation to get a reduction of their carbon footprint and the deep energetic dependence from fossil fuels of different countries. Although there are studies about how to produce this alternative fuel and if it...

The structure of the wind turbines nowadays is a critical element due to their importance from the reliability, availability, safety, and cost points of view. This is more relevant when the offshore wind turbine is considered. This paper introduces a novel design of a Fault Detection and Diagnosis...

With the aggravation of the unprecedented greenhouse effect, the reduction of greenhouse gases which mainly consist of CO 2 has caught high attention by global scholars. The membrane absorption of CO 2 from the flue gas seems a promising alternative to conventional absorption methods like chemical...

Tubular halloysite clay mineral and nanocrystalline TiO 2 were incorporated in the preparation of nanocomposite films on glass substrates via sol-gel method at 450ºC. The synthesis involves a simple chemical method employing nonionic surfactant molecule as pore directing agent along with the acetic...

Iron oxide materials were synthesized by an easy and rapid hydrothermal method using different iron precursors (FeCl 3∙6H 2O, Fe(NO 3) 3∙9H 2O and K 4Fe(CN) 6∙3H 2O), solution pHs (acid and basic) and reaction times (3 h and 6 h). The synthesized materials were thoroughly characterized by...

Natural systems offer an economic solution for the treatment of wastewater from small settlements. This study presents a detailed technical analysis of three stabilization pond systems designed to treat municipal wastewater, varying in capacity from 250 to 1400 population equivalent. Construction...

The present work is about the techno-economic evaluation of a biodiesel industrial unit that exclusively use recycled edible oils as feedstock, for two alternative production technologies. Nowadays, many biodiesel production units use a mixture of virgin vegetable oils and waste cooking oils. The...

The production of bio-pellets is an alternative to add value to the residual biomass of the oil palm-extraction process. In this work, an experimental study of the pelletising process of oil palm residual biomass blends is presented. An experimental full factorial design that uses as factors the...

Poor appreciation of Wetlands has been linked to their massive destruction in Nigeria. This results in a considerable loss of benefits on income generation, food security and environment sustainability. This study assesses people’s perception of benefits from selected Wetlands in South West, Nigeria...