This study investigates the effectiveness of fly ash-based geopolymer concrete was conducted to be used as an alternative material to replace the normal concrete. The concrete mixture was prepared by mixing fly ash, fine aggregate, nano-slag, and SP in Na2SiO3/NaOH solution. The mixture was divided...

The urge of environmental friendly techniques in textile processing is gaining much attention due to high risks of effluent load causing eco-imbalance. For the present study, the cotton fabric and Reactive Violet H3R dye solution were treated with microwave radiation for 2, 4, 6, 8 & 10 min. at...

The Membrane Bio-Reactor (MBR) technology offers a series of environmentally-friendly advantages, such as high quality effluent, pathogens removal capacity and avoided use of chemicals for disinfection, allowing it to be regarded as an environmentally friendly technology, when applied for wastewater...

The paper presents a laboratory study of concrete mixes based on the alkali-activation of an industrial by-product, ground granulated blast furnace slag (GGBS). A number of factors potentially affecting the resulting concrete quality in terms of workability and strengths were investigated (namely...

Clay of the Middle Atlas Mountains region, Morocco, was used to investigate the removal of heavy metals ions (Cadmium and Copper) from aqueous solutions with respect to several experimental conditions including pH, contact time, initial solute concentrations, temperature and ionic strength. Kinetic...

A wide range of technologies has been developed for the removal of dyes from wastewaters to decrease their environmental impact. Wastewater containing dyes is generally treated using more than one process such as adsorption/biosorption. In this study, effects of initial pH (2-8), initial azo dye...

In this study, a two-stage anaerobic ammonium oxidation (anammox) system—including a partial nitritation system with a biological selector (PNBS) and a granular activated carbon-based granule anammox process (GAP) —was used for the treatment of real high-strength rare-earth ammonia wastewater (HRAW)...

Most of water sources throughout the world contain natural organic matter (NOM), which is the best description as a complex mixture of organic compounds. The effect of iron ion on removal efficiency of dissolved organic carbon (DOC) using UV/TiO 2 photo catalytic oxidation (TiO 2) was examined. In...

Jarosite waste released from the zinc production process during the hydrometallurgical leaching of concentrates in Trepça lead-zinc smelter, Kosovo has serious environmental problems due to the presence of toxic metals such as Pb, Cd, Zn, As etc. Its disposal in open tailing damps has become a major...

In this paper, ethylene glycol wastewater (EGW) treatment was studied by using one anaerobic polyvinyl alcohol (PVA) gel beads based biofilm reactor. Enhanced by PVA-gel beads based biofilm, organic loading rate (OLR) about 11 g COD l -1 d -1 was achieved at the end of this study. Black PVA-gel...

This study was conducted to investigate the effect of praestol, as a coagulant-aid, to improve coagulation-flocculation process in the removal of disperse red 60 from aqueous solutions. The effect of various parameters including coagulants dose (10-1000 mg l -1), praestol dose (0-1000 mg l -1)...

In this paper, one partial nitritation system with biological selector (PNBS) was first evaluated in treating high-strength ammonia containing wastewater. Nitrite production rate (NPR) of 8.25 kg N m -3 d -1 was achieved with influent NH4-N concentration 2000 mg l -1 and HRT 3.2 h, which is, to our...

This study features an analysis of the influences and effects of different postures performed within tasks of waste collection. Four men, ages 30, 46, 60 and 65, and two women, ages 38 and 48, took part in this study. The assessment makes use of a 3D Static Strength Prediction Program (3DSSPP™) to...

Iron and steel industry generates substantial amount of inorganic solid wastes namely blast furnace (BF), Linz-Donawitz (LD) slag from the metallurgical process and fly ash from thermal power plant which creates environmental pollution when dumped in open land. In this investigation, BF and LD slag...

In this work, the stopping power due to free and bound electrons in a plasma target is analyzed for two different kinds of projectile, protons and alpha particles. The stopping of free electrons is calculated using the dielectric formalism, well described in previous literature. In the case of bound...

The production of bio-pellets is an alternative to add value to the residual biomass of the oil palm-extraction process. In this work, an experimental study of the pelletising process of oil palm residual biomass blends is presented. An experimental full factorial design that uses as factors the...

An experimental investigation was carried out to compare the compressive strength of zero slump and high slump concrete with high volume fly ash. 40% to 70% replacements of OPC (by weight) with class F fly ash have been incorporated. Superplasticizer was added at 1% of binder (cement + fly ash) to...

In this study, the removal of a cationic dye, basic red 18, used in the textile industry with montmorillonite was investigated as a function of initial dye concentration, pH, agitation speed, adsorbent dosage, ionic strength, and temperature. Adsorption process was attained to the equilibrium within...

High strength geopolymers were produced from coal combustion fly ashes. These matrices reached compressive strength values over 100 MPa, much stronger and denser than obtained by using Portland Cement binders. Size fractions were obtained by size separation techniques and the relationship between...

Coal fly ashes and metallurgical slags are currently widely used as supplementary cementitious materials in production of Portland cement-based concretes. However, this application makes very poor use of the intrinsic reactivity of the glassy phases present in the waste materials, and can hardly...

The present paper aims to assess the effect of various additives on the compressive strength of inorganic polymers (geopolymers) synthesised using low Ca electric arc ferronickel slag and alkali activating solutions. The main operating parameters include pre-curing (48 hours), temperature (40 to 80...

This paper deals with the geopolymerization of the red mud generated in the primary aluminium production and the slag generated in the ferronickel production, in order to develop inorganic polymeric materials with advanced mechanical and physical properties. In particular, the effect of the main...

The combinations of H2O2/Fe+2, UV/H2O2/Fe+2 and UV/H2O2 process were investigated on treatment of oil recovery industry wastewater. Treatment of oil recovery industry wastewater, a typical high pollution strength industrial wastewater (chemical oxygen deman (COD): 21000 mg l-1, biological oxygen...

Fly ash is an important industrial by-product that comes from the combustion of coal, for the production of electrical energy. In our country, only a small percentage is used for the construction of technical projects, while the rest is stockpiled, causing serious problems. Because of its great...

The present study is performed with the aim to reduce the levels of polluting emissions from fuel combustion that produce acid rains and the greenhouse effect (NOx, CO2). The electric field effects on the processes of heat/mass transfer and propane combustion are studied in order to perform electric...