This study highlights the potential of steel slag, which is an industrial by-product of steel making industry as treatment media for metal-rich acid mine drainage (AMD). A series of batch adsorption studies has been done to demonstrate the effects of contact time, solution pH, initial concentration...

The identification of PM sources and their contribution to measured PM concentrations is crucial for the environmental policy making since the findings be able to conduce to the development of relevant legislation in order to achieve effective air quality manage. In this study, the sources of PM10...

Response surface methodology has been used to design experiments and to optimize the effect of independent variables responsible for higher adsorption of humic substances by activated carbon supported nanoscale zero-valent iron from aqueous solutions. The variables of initial concentration, time, pH...

Herein, we describe the batch and fixed-bed column adsorption of Cu2+ and Pb2+ by raw and treated date palm leaves (DP) and orange peel (OP) waste biomass. Contact time, pH, adsorbent dose, and particle size were optimized in batch adsorption experiments, while breakthrough curves obtained in fixed...

In this study, nanocomposite of ceria sawdust (CeO 2/SD) synthesized by precipitation method was utilized for removal of As (III) ions from aqueous solutions. Study of the process was done in column system. Characterization of the nano sized adsorbent particles was carried out using XRD and SEM...

This work investigated the potential of calcined electrocoagulation sludge (CES) within metals hydroxide generated during removal of boron using Al electrode for adsorption of fluoride from aqueous solution. The effects of contact time, pH of the solution (2-10), stirrer speed (50-450 rpm), initial...

Attrition of limestone particles in bubbling fluidized bed has significant influence on cyclic CO 2 capture ability of sorbents. The limestone particle attrition and size distribution characteristics were investigated experimentally in a bench scale fluidized bed. The effects of initial particle...

Several adsorbents have been tried out by researchers to remove different pollutants from wastewater. However, the adverse effect of these biosorbents on the treated water and the possibility of leaching new pollutants to the treated water have not been investigated. A batch technique was employed...

This study was aimed to investigate the use of Mustard stalk as a cheap, eco-friendly adsorbent with support matrix for the immobilization of microbial cell and for subsequent removal of 2,4-dichlrophenol(2,4-DCP) from waste water. A comparative batch study between adsorption as well as simultaneous...

In this paper, the effects of the mixing ratio and particle size of coal were investigated using a thermogravimetric analysis (TGA). A method of Achar-Brindley-Sharp-Wendworth (ABSW) was applied to a simultaneous calculation of the kinetic parameters (including the apparent activation energy, the...

Tubular halloysite clay mineral and nanocrystalline TiO 2 were incorporated in the preparation of nanocomposite films on glass substrates via sol-gel method at 450ºC. The synthesis involves a simple chemical method employing nonionic surfactant molecule as pore directing agent along with the acetic...

Iron oxide materials were synthesized by an easy and rapid hydrothermal method using different iron precursors (FeCl 3∙6H 2O, Fe(NO 3) 3∙9H 2O and K 4Fe(CN) 6∙3H 2O), solution pHs (acid and basic) and reaction times (3 h and 6 h). The synthesized materials were thoroughly characterized by...

The aim of this study was to compare particulate matter (PM) pollutants performed at three different enclosed parking garages (A, B and C) and two streets (1 and 2) in Belgium. Particle mass concentrations, number concentrations and their size distributions were measured in real time using an...

Abstract Spatial and temporal variation of fine particulate pollution in a complex small coastal city, Macau, was investigated by using a mobile air quality monitoring platform. Real-time street level measurements of aerosol size distribution were carried out three times per day by using an on-board...

Literature reports have indicated that Particulate Matter (PM) concentrations in the atmosphere over the major urban centres of Greece are high compared to other European cities of the same size. The great majority of these reports are based on measurements that have been conducted over a limited...

This study reports particulate matter levels of various size fractions (PM10, PM2.5, and PM1) and identify their controlling factors, in various locations over Greece. It combines long-term data sets involving particle concentrations as measured in the island of Crete in the Eastern Mediterranean...

The present paper aims at a treatment technique designed for special industrial wastewaters contaminated with only traces of halogenated organic compounds (HOCs) – concentrations which are nevertheless large enough to make a discharge into municipal sewage works impossible. Our research follows the...

Two novel materials have been developed and tested in initial studies for the in-situ generation of sorption and reactive barriers for subsurface water treatment at low cost by introducing sorbents or reagents via injection wells. Both materials are based on finely-ground activated carbon with a...

The kinetic studies on the removal of Acid Violet-17 (AV) by adsorption on various adsorbents such as fly ash (FA), iron chromium oxide (ICO), lignite coal (LC), kapok fruit shell carbon (KC) and cashew nut shell carbon (CC) have been made and the results have been compared with that of commercial...

High strength geopolymers were produced from coal combustion fly ashes. These matrices reached compressive strength values over 100 MPa, much stronger and denser than obtained by using Portland Cement binders. Size fractions were obtained by size separation techniques and the relationship between...

Fly ash is an important industrial by-product that comes from the combustion of coal, for the production of electrical energy. In our country, only a small percentage is used for the construction of technical projects, while the rest is stockpiled, causing serious problems. Because of its great...

The relationship between the viable airborne bacterial and fungal concentrations and the respirable particulate matter with aerodynamic diameter less than 10 μm (PM10), 2.5 μm (PM2.5), and 1 μm (PM1) in the ambient air was studied. An Andersen six stage viable particle sampler and a MAS 100 sampler...

Particulate matter measurements were performed at the Akrotiri research station on the island of Crete (Greece) using an 8-stages Andersen non-viable impactor. The main purpose of the current work was to measure the ambient levels of PM10 particulate matter as well as the concentrations of metals...

The aim of the present work was to characterize particulate matter (PM) and elemental carbon (EC) indoor and outdoor concentration levels in the Athens area and to examine the contribution of ambient air to the observed indoor levels. 24-hr simultaneous indoor and outdoor PM10 and PM2.5 measurements...