Bioplastics made from renewable resources, such as contemporary biomass, have been developed more quickly as a result of global pollution from plastics made from petroleum, but it is still unclear how these materials will affect ecosystems. A common biopolymer that will make up 33% of the...

With an estimated volume of 162 thousand metric tonnes in 2020, India is the world's largest producer of tamarind. The country is home to a number of tamarind species, and production is spread out across the country. Farmers and agro-industries continue to encounter numerous challenges in the...

The reduction of highly toxic Cr (VI) from industrial wastewater of low concentration by different low-cost ample sorbent materials was investigated. In order to remove Cr (VI) from aqueous solutions, the biosorption properties of natural waste (Betel Seeds) were investigated with varying several...

The majority of nitrate (NO3‾) pollutants come from a different type of industries. Even if present in low amounts, these nitrates are harmful to humans and aquatic systems. This research investigated the utilisation of Tamarind Fruit shell (TFS) as biosorbent in the removal of Nitrate from aqueous...

The constant development of technological processes aggravates the problem of pollution, due to a significant change in the composition of effluents, which makes necessary new (and/or improved) treatment methods and catalytic materials. In this sense, the use of natural clays in the synthesis of low...

Adsorption is an effective and widely technique used for separation many pollutants from wastewater. Pollution of water with color material such as dyes is of environmental concern due to their toxicity and cause carcinogenic effects on human and aquatic life. These dyes are presented into the water...

The present study observed the removal of the organic content from the real effluent water produced by the oilfields. The proposed treatment process was the adsorption technique using the moringa peels as adsorbing agent. The effect of processing parameters such as adsorbent dosage, contact time and...

In this study, an investigation was carried out in order to determine the potential of ordered mesoporous carbon including high ratio sucrose in its composition as a CO2 adsorbent. Structural characterizations of silica and carbon material were determined by using a scanning electron microscope (SEM...

The ecological structure and function of the water reservoirs deteriorate dramatically because of streams fed by the excess nitrogen-containing wastewater. To protect the water reservoirs from polluted streams, structures such as natural wastewater treatment (NWT) systems to be created inside or...

A facile strategy toward modification of aluminium filings (AF), a waste material from aluminium manufacturing industry, into a highly efficient adsorbent was examined. AF was simply treated with thermal modification to form a cheap adsorbent for Phosphorus (P) removal from aqueous solutions. The...

The present study systematically and comprehensively reviewed different aspects of treating Acid Mine Drainage (AMD) with active treatment and waste materials. The work also critically reviews the status and the factors associated with the treatment process. Although, conventional active methods are...

This study presents an evaluation of diatomite as a low cost adsorbent for Pb (II) removal from aqueous solutions under various conditions. The results demonstrate that adsorption of Pb (II) is strongly dependent on the pH of the solution. The effect of pH on adsorption of Pb (II) on diatomite was...

The utilization of three novel and distinct agricultural waste materials, namely casuarina fruit powder (CFP), sorghum stem powder (SSP) and banana stem powder (BSP) as low cost adsorbents for reducing chemical oxygen demand (COD) levels of coffee industry wastewater has been examined. Prepared...

Two novel materials have been developed and tested in initial studies for the in-situ generation of sorption and reactive barriers for subsurface water treatment at low cost by introducing sorbents or reagents via injection wells. Both materials are based on finely-ground activated carbon with a...

The kinetic studies on the removal of Acid Violet-17 (AV) by adsorption on various adsorbents such as fly ash (FA), iron chromium oxide (ICO), lignite coal (LC), kapok fruit shell carbon (KC) and cashew nut shell carbon (CC) have been made and the results have been compared with that of commercial...

Fly ash is an important industrial by-product that comes from the combustion of coal, for the production of electrical energy. In our country, only a small percentage is used for the construction of technical projects, while the rest is stockpiled, causing serious problems. Because of its great...

The ability of activated carbon and different low-cost by-products and waste material as sorbents to remove various reactive dyes from aqueous solutions and wastewaters was investigated. All aqueous dye solutions contained 2,000 mg l-1 NaCl, to mimic real dye wastewater. Batch kinetic and isotherm...

The efficacy of low cost adsorbing materials for removal of 2,4-D (2,4 dichloro phenoxy acetic acid) and atrazine (2-chloro-4-ethyamino-6-isopropylamino-1,3,5 triazine) herbicides from drinking water was evaluated. Five low cost adsorbents, viz. wood charcoal, rubber granules, bottom ash, macro...

This research work has been focused in the study of gallinaceous feathers, a waste that may be valorised as sorbent, to remove the Dark Blue Astrazon 2RN (DBA) from Dystar. This study was focused on the following aspects: optimization of experimental conditions through factorial design methodology...

The mechanism of Methylene Blue adsorption on biosolid (waste sludge) has been studied through batch experiments. The effects of various experimental parameters, such as pH (3- 11), biosolid dosage (1-10 g l-1), contact time (5-1440 min) and initial dye concentration were investigated. The results...

Slurry seal is applied for low-cost paving and surface maintenance. The principal materials used to create slurry seal are aggregates, asphalt emulsion, water and fillers like Portland cement (mainly), lime and other materials. This paper presents the use of alternative fillers instead of expensive...