The batch adsorption technique investigated the efficiency of sawdust adsorbent for removing copper ions from synthetic solutions. A chemical synthesis process prepared the activated sawdust powder, and its surface area and pore volume were obtained by BET isotherm analysis. The ability of copper...

The Conversion of SO2 by Hydrogen Oxidation Branching Chain Reaction A.A. Arutyunyan Institute of Chemical Physics after A.B. Nalbandyan NAS of The Republic of Armenia, 5/2 Paruyr Sevak St., Yerevan 0014, Republic of Armenia E-mail: harhasmik@mail.ru The process of SО2 conversion in the hydrogen...

Unqualified treatment of the discharge of wastewater contains a large number of nitrogen and phosphorus and other nutrients, such wastewater into the water environment is easy to lead to eutrophication of water bodies, and cause harm to human health. In order to prepare a cost-effective, efficient...

Synthesis of Ni/Al-LDH prepared into Ni/Al-Hc composites using hydrochar from rambutan peel (Hc) and applied as a congo red adsorbent and analyzed based on adsorption selectivity, kinetics, isotherms, adsorption thermodynamics and recycling. The success of Ni/Al-Hc composite preparation was proven...

Conducting poly(o-toluidine) (POT)/titanium dioxide (TiO2) nanocomposite have been synthesized by in situ chemical oxidation polymerization of o-toluidine in the presence of TiO2 nanoparticles. The various composites were synthesized by changing the percentage load of titanium dioxide nanoparticles...

This study focused on removing methylene blue (MB) from aqueous solutions using microalga Scenedesmus regularis as a biosorbent. The biomass was characterized by Fourier transform infrared spectroscopy (FT-IR) and field emission scanning electron microscopy (FE-SEM). The difference in thermal...

250 million people worldwide suffer from visual impairment. 64% of them wear glasses. More than 80 percent of all eyeglasses worn today have plastic lenses. Plastic lenses made of polycarbonate discs are created through the process of machining which requires the use of a coolant. The ensuing...

Industrial production brings serious Cr(Ⅵ) pollution problems, so as to explore new treatment methods for Cr(Ⅵ), In this paper, modified montmorillonite was prepared by modifying montmorillonite with starch and lanthanum nitrate, and its adsorption mechanism and effect on Cr(Ⅵ) were explored. The...

To assess the impact of climate change on wind regimes, we performed a statistical analysis of some meteorological parameters. Indeed, variables such as temperature, humidity, pressure, and insolation are rarely or not considered in the estimation of wind regimes and therefore in the...

Methylene blue (MB) removal from aqueous media using hybrid bioprocess: biosorption on modified cork powder (SDS-cork) and soluble turnip peroxidase (STP) was investigated. Cork powder was modified with sodium lauryl sulphate (SDS). Chemical composition of the biosorbent were characterized by...

The performed work reports the manipulation of a collective local surplus solid (fish scales of tilapia) for the synthesis of copper nanoparticles. The technique was so customary to establish to be green, clean for the environment, and less expensive. Copper nanoparticles were synthesized using...

Nanotechnology is the newest and one of the most promising areas of research in modern medical sciences. Metal nanoparticles possess extraordinary optical, thermal, chemical properties and are being widely used in industrial, electronics, and biomedical fields. It has presented its potential to...

The present communication attempts to explore the adsorption potential of Mixed Fruit Peel Waste (MFPW) to remove Sunset Yellow FCF dye from an aqueous solution. The MFPW is a low-cost adsorbent prepared from the peels orange, watermelon and banana. The characterization of MFPW was made through FTIR...

TiO2 nanomaterials have gained much interest due to their importance of wide area application. In this study, TiO2 nanocomposites were modified with Ag NPs by the stober method. The synthesized nanocomposites were characterized by XRD, FTIR, scanning electron microscope (SEM) and energy dispersive X...

In shale gas-producing countries, soil, and groundwater contamination due to surface spills associated with hydraulic fracturing operations is one of the most worrying problems that arise, since its elimination is not easy or cheap to carry out, and its effects persist for many years. Thus, this...

In this study the efficiency of crystal violet dye removal from aqueous solutions using lilac tree leaf powder as adsorbent material was tested. After adsorbent surface analysis by SEM and FTIR technics, the influence of six controllable factor on dye adsorption process was assesses using a L27...

The nanocomposites of poly(o-chloroaniline) with titanium dioxide have been prepared via chemical oxidative polymerization technique using o-chloroaniline monomer and titanium dioxide nanoparticles for photocatalytic application. The different composites were prepared by varying the load percentage...

A composite active layer was prepared by cage type polyhedral oligomeric silsesquioxane (POSS) and polydimethylsiloxane (PDMS) and was combined with polyacrylonitrile (PAN) porous support layer to form pervaporation (PV) membrane, which was used in the PV membrane separation of dimethyl carbonate...

Silver nanoparticles (GSNPs) were synthesized from extracellular metabolites of endophytic isolates of Fusarium verticillioides (KT587649) to evaluate their efficiency as new biosorbent agents for the exclusion of cadmium Cd (II) from aquatic systems. The GSNPs were characterized through X-ray...

(E)-2-((pyren-1-ylmethylene)amino)phenol (3) containing pyrene linked through an imine bond to a phenol unit was synthesized and its Fe-complex 4 was prepared. The complex 4 is characterized by infrared (IR), x-ray diffraction (XRD) and UV-Vis spectroscopy techniques. The synthesized complex was...

The development of magnetic sorbent for dispersive solid-phase micro-extraction (DmSPE) often requires lengthy multi-step reactions. This research revealed a simplified method for preparing magnetic sorbent for the DmSPE using poly(4-vinylphenol) (PVP). The magnetic sorbent (PVP@MNP) was prepared by...

Nowadays, breast cancer is considered to be one of the most prevalent diseases worldwide, this initiated interest and growing demand for taxol production in large quantities. The limited availability of traditional taxol production from the Pacific yew trees has encouraged research into the...

Many eutrophic lakes contain rapidly growing hydrophytes. Overgrown biomass is usually me-chanically harvested and thrown away, leading to resource waste and secondary environmental pollution. Microbial degradation is an economically and environmentally friendly approach for managing hydrophytic...

The degradation of Remazol Black (RBB) by S-TiO2 photocatalyst was investigated. X-ray diffraction, fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and UV-vis specular reflectance spectroscopy has been used to characterize S-TiO2. The results...

In the present investigation, marine biomass (Posidonia Oceanica) (PO), in both its unmodified PO and basic-modified (Na-PO) forms, was studied for its possible utilisation as a cheap biosorbent for the retention of amoxicillin (AMX). Biosorption studies were carried out in a batch system and the...