In the present study, fruits of Ceratonia siliqua L. (carobs) were used as an alternative low cost biosorbents to remove a cationic dye, methyl violet 2B (MV) which has broad applications in paints, textile and printing ink, from aqueous solutions. The untreated (CRM) and thermal treated carobs (CC)...

The coconut shell-derived biochar was employed in this study to remediate Remazol Black B from aqueous solutions. For efficient dye remediation, preliminary batch investigations focused on adjusting temperature, biochar dosage, initial dye concentration, and pH. The results shown that dosage of...

Dewatered sludge is the main by-product from wastewater treatment and it contains various types of hazardous substances which can cause environmental pollution. The alternative utilization of sludge waste is for covering the landfill or as liner for the landfill. Landfill cover is a critical...

The batch adsorption technique investigated the efficiency of sawdust adsorbent for removing copper ions from synthetic solutions. A chemical synthesis process prepared the activated sawdust powder, and its surface area and pore volume were obtained by BET isotherm analysis. The ability of copper...

Biosorption of azo dyes (RO-16, RB-120 & RB-19) from the aqueous solutions was investigated using the activated sugarcane bagasse charcoal adsorbent. The characteristics of the prepared adsorbent were analyzed by SEM, EDX, FTIR, XRD, TG & DT analysis, and the BET surface area of the sugarcane...

Batch adsorption studies of heavy metals were carried out using activated charcoal groundnut shell powder as an adsorbent material. The groundnut shell was collected and synthesized by chemical synthesis to convert it into charcoal form. The prepared adsorbent’s pore size & surface area was analyzed...

The majority of nitrate (NO3‾) pollutants come from a different type of industries. Even if present in low amounts, these nitrates are harmful to humans and aquatic systems. This research investigated the utilisation of Tamarind Fruit shell (TFS) as biosorbent in the removal of Nitrate from aqueous...

Integrated anammox process has competitive advantages of low energy and carbon consumption in nitrogen removal. Because of the coupling of partial nitrification and anammox process, complex physicochemical and biological interactions occur in integrated anammox reactors, and long-term operation...

In this study, Chlorella vulgaris microalgae was cultivated from wastewater and converted into biochar through hydrothermal carbonization process. Acclimatization of microalgae resulted in a greater biomass yield of 4.1 g/L in 15 days in a Fog's medium to wastewater ratio of 20:80. Microalgae...

Growing environmental awareness coupled with stricter regulations has pushed various industries to look for appropriate technologies to treat wastewater. Natural coagulants have recently been used as part of water and wastewater technologies due to their performance, cost-effectiveness when compared...

Recycling of wastewater is an important issue as it is used for many important applications such as industries, agriculture, household applications and due to water scarcity across the different countries. Wastewater treatment is an important activity as it protects human being and the ecosystem...

TiO2 is the most effective photocatalyst but it has low adsorption in the visible region. Many efforts have been done to improve its photocatalytic activity in the solar region. In this study we use Mo-oxy species supported on titania surface since it is well known that titania surface can dispersed...

Industrial wastewater has become a great concern due to high concentrations of several hazardous contaminants, particularly heavy metals. Heavy metal contamination and its consequences for human health and the environment have gained interest in developing low-cost, long-term cleanup technologies...

Unqualified treatment of the discharge of wastewater contains a large number of nitrogen and phosphorus and other nutrients, such wastewater into the water environment is easy to lead to eutrophication of water bodies, and cause harm to human health. In order to prepare a cost-effective, efficient...

Water is the most important substance. Drinking water in the industry comes from raw water and is treated through a heating process. The results of laboratory tests on raw water used for drinking water are 41 MPN/100ml, so it is necessary to process raw water into drinking water using Reverse...

The primary purpose of this study is to investigate boron removal from synthetic hydraulic fracturing wastewater by membrane processes. The effects of pressure, pH, feed concentration, and polyol concentration on boron removal were determined using a cross-flow, flat-sheet membrane test unit. The...

The widespread use of alternative water sources in Kelantan encourages the development of cost-effective methods for the purification of water. A simple and straightforward adsorption process using a nanomagnetic adsorption composite (NMAC) was introduced in this study as a new adsorbent for the...

Synthesis of Ni/Al-LDH prepared into Ni/Al-Hc composites using hydrochar from rambutan peel (Hc) and applied as a congo red adsorbent and analyzed based on adsorption selectivity, kinetics, isotherms, adsorption thermodynamics and recycling. The success of Ni/Al-Hc composite preparation was proven...

This work focuses on the use of carbon-coated magnetic cobalt ferrite nanoparticles as catalysts for catalytic wet peroxide oxidation (CWPO) of the emerging concern pollutant paracetamol (PCM). The magnetic core of the catalyst is composed of CoFe2O4 developed by a sol-gel method. The core is...

Poultry slaughterhouse wastewater (PSWW) is a crucial concern fundamentally due to extensive generation and related substantial amounts of recalcitrant organic content due to high COD and oil and grease (O&G) levels. Hybrid advanced oxidation processes are promising, green, and innovative options to...

The constant development of technological processes aggravates the problem of pollution, due to a significant change in the composition of effluents, which makes necessary new (and/or improved) treatment methods and catalytic materials. In this sense, the use of natural clays in the synthesis of low...

The packed bed column study investigated the removal of toxic metal ions (Cr, Pb & Zn) using rice husk coated with iron oxide nanoparticles as an adsorbent material. The chemical fusion process prepared the nanomaterial adsorbent, and iron oxide capping provides stability to the prepared nano...

This study focused on removing methylene blue (MB) from aqueous solutions using microalga Scenedesmus regularis as a biosorbent. The biomass was characterized by Fourier transform infrared spectroscopy (FT-IR) and field emission scanning electron microscopy (FE-SEM). The difference in thermal...

Adsorption is an effective and widely technique used for separation many pollutants from wastewater. Pollution of water with color material such as dyes is of environmental concern due to their toxicity and cause carcinogenic effects on human and aquatic life. These dyes are presented into the water...

In this experiment, in the background of the plateau environment, the effects of ultraviolet irradiation on the microbial community structure, metabolic pathways and nitrogen metabolism function genes of sewage were studied at 0 (control group), 5, 10, 30, and 180 min. The results showed that the...