3,4-dichloroaniline (3,4-DCA) is a hardly biodegradable and hydrolysable compound, characterized as a persistent pollutant for water, soil and sediment and highly toxic for living organisms. In this work, the impact of different micrometeorological conditions on uptake of 3,4-DCA was investigated in...

A key component in the implementation of Water Framework Directive is the development of a river basin management plan for each river basin district. Water quality models are important tools to test the effectiveness of alternative management plans on the water quality of the respective water bodies...

Phytoremediation is an alternative to traditional chemical and ways of treating polluted soils. The current study was carried out to investigate the phytoremediation of soil contaminated with nickel (Ni) by Lepidium sativum. Soil samples from 0 to 10 cm depth were collected. Lepidium sativum was...

Heterogeneous photocatalysis is an advanced oxidation process (AOP) which has been widely studied by numerous researchers in the world and is used to degrade or remove a wide range of pollutants in water and air. The photocatalytic oxidation and mineralization of phenol in aqueous catalyst...

The combinations of H2O2/Fe+2, UV/H2O2/Fe+2 and UV/H2O2 process were investigated on treatment of oil recovery industry wastewater. Treatment of oil recovery industry wastewater, a typical high pollution strength industrial wastewater (chemical oxygen deman (COD): 21000 mg l-1, biological oxygen...

Runoff water is an important medium transporting various air pollutants from the air to the surface water. This paper presents the results of measurement of removal rates of anions and cations in the rain, road runoff, throughfall and surface water near a major urban highway (Gdańsk beltway). The...

The present study deals with the treatment of distillery spent wash by an ultrafiltration (UF) membrane followed by reverse osmosis (RO) membrane on a pilot scale membrane setup. The performance of the system was evaluated by varying applied pressure on the thin-film composite polyamide (TFC-PA) UF...

Industrial facilities emit pollutant air that contains volatile organic compounds (VOCs) and reduced sulphur compounds (RSCs) which are nuisance, corrosive to materials and dangerous to health. In recent years, biofiltration has replaced numerous conventional processes (i.e. adsorption) due to its...

This work is aimed at evaluating the potentiality of adding a rhamnolipid biosurfactant in a petroleum-bearing soil. For this purpose, dehydrogenase activity and seed germination (Lactuca sativa) testes were performed before the biodegradation assays with different concentrations of rhamnolipid (1...

The establishment of the Wastewater Treatment Plant of Athens is considered as the main factor contributing to the improvement of water quality and recovery of the marine ecosystem in Saronicos gulf as it removes significant percentage of pollutants entering the gulf, including heavy metals. The...

Sites co-contaminated with organic and metal pollutants are common and considered to be a more complex problem, as the two components often have a synergistic effect on cytotoxicity. This study investigated the dissipation mechnisms for pyrene in cadmium co-contaminated soil in which maize (ZEA MAYS...

Zinc oxide nanocrystals were prepared by precipitation method using ZnSO4.7H2O and NaOH as raw materials. The prepared ZnO nanocrystals were characterized by powder X-ray diffraction (XRD). Primary objective was to focus on the influence of inorganic oxidants, metal ions and anions on photocatalytic...

Various pollutants (e.g. boron and hexavalent chromium) are introduced into the aquatic environment from a variety of industrial operations causing damages to environment and affecting human health. Boron in irrigation water is of particular interest because it can have beneficial or toxic effect on...

The removal of heavy metals from wastewaters is a matter of paramount importance due to the fact that their high toxicity causes major environmental pollution problems. One of the most efficient, applicable and low cost methods for the removal of toxic metals from aqueous solutions is that of their...

The dependence of Cd(II) and Cu(II) uptake by yeast cells on the age and temperature of cell culture was studied. Saccharomyces cerevisiae, Kluyveromyces marxianus and Debaromyces Hansenii were chosen as typical yeasts, while Cd(II) and Cu(II) as typical metal pollutants. Our results revealed that...

Anionic poly(sodium acrylate), PANa, hydrogels bearing negatively charged –COO- groups were used as sorbents for the removal of colored organic or inorganic model pollutants, namely Crystal Violet and Cu2+, from water. It was found that PANa hydrogels adsorb stronger Cu2+ions than Crystal Violet, as...

The capacity of cyclodextrins in trapping VOCs is studied. Cyclodextrins (CDs) are a family of cyclic oligosaccharides that are composed of α-1,4-linked glucopyranose subunits. The most notable feature of cyclodextrins is their ability to form inclusion complexes (host–guest complexes) in solution...

The wastewater of leather industry which is one of the most widespread industries having large amount of water consumption and very high pollution loads, may be characterized by several key parameters including toxic pollutants exhibiting toxicity. Therefore the effluent of leather tanning industry...

In this work, pre-ozonation for degradation, decolourization and detoxicifying of a raw textile wastewater collected in a textile fininshing industry, Istanbul (Turkey) is investigated. Differing from the previous studies, a low ozone (O3) flow rate (9.6 mg min-1) was applied at original pH of the...

Combustion of poor quality coals is used today worldwide for energy production. The removal of polluting compounds, i.e. S, N, Hg and Cl from them prior to combustion is important not only for improving the coal quality, but also for meeting the strict environmental standards. Thus, a preventive...

Sewer systems may often operate as bioreactors causing considerable wastewater quality changes and in some cases reducing the pollution load conveyed to the treatment plant. Conceptually, transformation of organic matter takes place both in the bulk water (by suspended micro-organisms) and by the...

Chloroform and other bromochlorotrihalomethanes were first identified as disinfection byproducts (DBPs) in chlorinated water in 1970s. Since then, many other DBPs have been identified such as haloacetonitriles, haloacetaldehydes, cyanogen halides, aldehydes, ketoacids, chlorite, bromate and other...

Biological treatment has been carried out in two different systems: aerated closed and threephase fluidized bed reactors for hydrocarbons removal from refinery wastewaters. For the two systems, hydrodynamic study allowed the determination of operating conditions before treatment experiments. Then...

Pollution of the environment with uranium and associated health effects to human have recently become of major concern, particularly due to the use of depleted uranium in armourbreaking bullets. Indeed, uranium in environmentally significant concentrations is found near to uranium mining and...

Photocatalysis by titanium dioxide (TiO2) is a water treatment method. Pseudomonas aeruginosa is a microorganism resistant to chlorine and UV-C irradiation. TiO2 photocatalytic technology can destroy bacteria, which are resistant to oxidative destruction of cell membrane caused by sole UV...