Response surface methodology has been used to design experiments and to optimize the effect of independent variables responsible for higher adsorption of humic substances by activated carbon supported nanoscale zero-valent iron from aqueous solutions. The variables of initial concentration, time, pH...

In this paper, the removal of Maxilon Red GRL by adsorption onto raw soil sample known as Niğde (Bor) grape molasses soil and Fe+2/H2O2 reagent as advanced treatment processes were investigated. The effects of various experimental parameters such as initial Fe+2 and H2O2 concentrations, pH...

The activated charcoal (AC) was synthesized from banana leaf rim (BLR) through three activation methods; physical (BLRC), chemical (Z BLRC, zinc chloride) and microwave activation (MW BLRC). The AC was characterized using fourier transform infrared spectrometer (FT-IR), Thermogravimetric analysis...

Herein, we describe the batch and fixed-bed column adsorption of Cu2+ and Pb2+ by raw and treated date palm leaves (DP) and orange peel (OP) waste biomass. Contact time, pH, adsorbent dose, and particle size were optimized in batch adsorption experiments, while breakthrough curves obtained in fixed...

This study describes the removal of Cr (VI) ions from aqueous solutions using silver oxide/sawdust nanocomposite (Ag2O/SD NC) that was prepared using the chemical precipitation method. Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR)...

The purpose of this study was to investigate the adsorption properties of locally available sepiolite and clinoptilolite materials as adsorbents for the removal of crystal violet and congo red dye ions from aqueous solution. Previous experiments have revealed that two variables, concentration and...

This study investigates the adsorption kinetics and removal conditions of copper by walnut tree sawdust from synthetic solutions in the batch and fixed bed reactors. The selected experimental parameters for the batch reactor were concentration, solution pH, adsorbent amount and temperature. The...

Low concentrations of contaminants in rainwater is the primary benefit of transforming it as an alternative source of drinking water. However, treatment is necessary as rainwater collects contaminants that are persistent in the environment such as lindane and E.coli. The combination of...

In this study, nanocomposite of ceria sawdust (CeO 2/SD) synthesized by precipitation method was utilized for removal of As (III) ions from aqueous solutions. Study of the process was done in column system. Characterization of the nano sized adsorbent particles was carried out using XRD and SEM...

Adsorption is one of the methods that can be used for metal removal. In this study five metals were used cadmium, chromium, lead, copper and Nickel (Cd, Cr, Pb, Cu, and Ni) over a concentration range from 0.8 to about 7 mg l -1 for each metal. Adsorbents were prepared with increasing chitosan to...

In the present study, adsorption potential of potassium permanganate (Hypermangan) modified zeolite was investigated for the removal of nitrate from synthetic wastewater. Effects of the most significant parameters (pH, adsorbent dose, nitrate concentration and contact time) were initially evaluated...

Agriculture wastes like sugarcane bagasse are available in large quantities in Egypt. Various adsorbents from natural materials, industrial waste materials, agricultural by-products, and biomass based activated carbon can be used in the removal of various dyes. Raw Bagasse pith (RBP) was used to...

In this study, the removal of cadmium by using pumice coated with iron nanoparticles (INPs) from synthetic wastewater was investigated. The effects of parameters influencing adsorption: contact time (10-20 min), pH (3-9), initial cadmium concentration (25-125 mg l -1) and adsorbent dose (2-10 g l -1...

This study is focused on degradation of Direct Black dye, a common azo dye, catalyzed by nickel hydroxide in aqueous solution. Nickel sulfatehexahydrate, sodium hydroxide and sodium hypochlorite were used for synthesis of nickel hydroxide catalyst. The catalytic performance of nickel hydroxide for...

Low cost agricultural waste adsorbents can be viable alternatives to activated carbon for the treatment of contaminated wastewater. Sugarcane Bagasse, an abundant agriculture waste in Egypt, was used in the present study to prepare activated carbon. Batch adsorption experiments were conducted to...

The combined ultrasonic assisted/nanoparticle based procedure was described for an economical and rapid removal of meso-tetrakis (4-sulfonatophenyl) porphyrin (TSPP) by copper nanowires loaded on activated carbon (Cu-NW-AC). The synthesized Cu-NW-AC was investigated by scanning electron microscopy...

The present study investigates the ability of formaldehyde treated Simarouba glauca seed shell powder for removal of methylene blue (MB) from aqueous solutions. Batch adsorption studies were carried out under various experimental conditions such as agitation time, dye concentration, adsorbent dose...

Adsorption of Cu (II) ions by untreated sugarcane bagasse (USCB) and treated sugarcane bagasse (TSCB) was investigated. Sugarcane bagasse was treated with 0.1M oxalic acid prior to TSCB adsorption studies. Dependence of Cu (II) adsorption on pH, contact time, temperature and initial concentration of...

Cerium oxide (CeO 2) nanoparticles (NPs) were used for the removal of cadmium (II), lead (II) and chromium (VI) ions in single aqueous solutions and in solutions with mixtures of the three metals. The adsorption studies were carried out at pH 5 and 7 using a systematic factorial experimental design...

This work investigated the potential of calcined electrocoagulation sludge (CES) within metals hydroxide generated during removal of boron using Al electrode for adsorption of fluoride from aqueous solution. The effects of contact time, pH of the solution (2-10), stirrer speed (50-450 rpm), initial...

This study was aimed to investigate the use of Mustard stalk as a cheap, eco-friendly adsorbent with support matrix for the immobilization of microbial cell and for subsequent removal of 2,4-dichlrophenol(2,4-DCP) from waste water. A comparative batch study between adsorption as well as simultaneous...

The removal of mercury by adsorption process using fly ash was investigated in this study. Mercury removal capacity of fly ash was performed by batch mode adsorption experiment with the effect of various parameters i.e., contact time (0.5-3.5) h, pH of 2-10, concentration of adsorbate (1, 5 and 10)...

In this study, the removal of a cationic dye, basic red 18, used in the textile industry with montmorillonite was investigated as a function of initial dye concentration, pH, agitation speed, adsorbent dosage, ionic strength, and temperature. Adsorption process was attained to the equilibrium within...

The objective of this pilot study was to evaluate the performance of Powdered Activated Carbon (PAC) for the removal of individual trihalomethanes (THMs) from chlorinated drinking water, Athens, Greece. The pilot treatment facility was located at the Water Treatment Plant of EYDAP (Athens Water...

This study investigates the partition of heavy metals in slag from the rotary kiln (SL), second combustion chamber ashes (SCCA), filter cake (FC) from a bag filter and flue gas (FG) emissions (both in particulate and gas phases) of the Istanbul medical waste incinerator (ISTAC). Eleven targeted...