Protozoa play a significant role in activated sludge systems, since they graze on dispersed bacteria, supporting a healthy food web in the activated sludge artificial ecosystem. However, operational parameters and influent properties are the most important factors affecting the composition of...

The aim of the present study is a) to examine the healthcare waste management practices in W. Greece, Peloponnese, Epirus and Ionian islands b) to investigate the implementation of the institutional frame and c) to make suggestions in order to achieve a proper Hospital Healthcare Waste Management...

The discharge of colored textile wastewaters containing dyes with different chemical characteristics into the receiving streams is a problem for toxicological, ecological and also esthetical reasons. Most of dyes are stable, and not easily degradable by the conventional treatment methods, so removal...

To evaluate the effects of titanium and bio-fertilizers on some agronomic and physiological properties of triticale grown in cadmium (Cd) contaminated soil, a glasshouse experiment was conducted based on a completely randomized design with three replications. The treatments were arranged in a 4×4...

This study was conducted to determine phytoextraction efficiency of Puccinellia distans (Jacq.) Parl. for Pb (450 mg kg-1 Pb(NO3)2) and the application of EDTA and DTPA (2.5DTPA, 5DTPA, 2.5EDTA, 5EDTA, 2.5EDTA+2.5DTPA, 2.5EDTA+5DTPA, 5EDTA+2.5DTPA, 5EDTA+5DTPA) on the Pb uptake and the potential for...

Chemical precipitation is a suitable method for the recovery and removal of ammonium in water and a fertilizer known as MAP (magnesium ammonium phosphate; MgNH4PO4.6H2O; struvite) is obtained. Additionally, the advantage of this method is that environmental conditions do not have any effect compared...

In present work, a novel supported bucky paper (BP) membrane was fabricated and evaluated for humic acid (HA) removal from water. For better understanding the effect of operating variables, response surface methodology (RSM) was also applied. Three independent parameters namely TOC concentration (5...

This paper presents new and explicit equations to estimate aeration-related parameters such as standard oxygen requirement, daily energy consumption and total mass transfer coefficient for the diffused aeration. The proposed formulations are derived for the steady-state completely mixed activated...

The composite media, Zeliac TM was developed with the initial aim to provide low cost adsorbent with promising adsorption capacity. This study was conducted to investigate the removal of UV absorbance at 254 nm (UV 254) in Kerian river water using Zeliac TM as the media. Batch experiments study was...

The scientific community has recognized the necessity for more efficiently selected inputs in artificial neural network models (ANNs) in river flows and has worked on this despite some shortcomings. Moreover, there is none or limited inclusion of ANN inputs coupled with atmospheric circulation under...

The aim of this study is to achieve a greater insight regarding quiet areas in agglomerations and contribute to their identification. The small urban setting of Mytilene located in the island of Lesvos (North Aegean, Greece), was the case study of this research. The need to control and manage...

Pyrolysis properties of fresh ficus lacor leaves with moisture content of 70 wt. % was investigated in a TGA setup. The effects of different operating parameters on pyrolysis of biomass were studied in a fixed-bed reactor system. With addition of CaO, there showed an additional decrease in weight at...

Aniline is a harmful substance that pollutes the environment and seriously endangers human health. In the present study five different bacteria were enriched and isolated from the soil around Shiraz refinery (Iran) as aniline degrading bacteria. They were identified as Enterobacter ludwigii KH-5...

The meteorological, physical and hydrological conditions prevailing in a hilly area, namely the region around Malaxa (Western Crete), are analyzed and investigated in relation to water harvesting applications. The literature relating to water harvesting techniques and applications is reviewed and...

Adsorption is one of the methods that can be used for metal removal. In this study five metals were used cadmium, chromium, lead, copper and Nickel (Cd, Cr, Pb, Cu, and Ni) over a concentration range from 0.8 to about 7 mg l -1 for each metal. Adsorbents were prepared with increasing chitosan to...

The growing number of polluted land areas makes the question of rehabilitation and safe/effective use of these areas increasingly imperative. For land polluted by heavy metals, the possibility of transferring the toxic pollutants to humans through the food chain further increases the importance of...

The ability of fertilizer treatments (O (Optimum level), OP (Optimum level + twice amount of K +), OZ (Optimum level + twice amount of Zn 2+) and OZP (Optimum level + twice amount of K + + twice amount of Zn 2+)) to ameliorate salinity stress was studied in canola plants. In addition, fertilizer...

A dynamic mathematical model, based on the biochemical kinetic processes dominated in shallow free water systems was developed following the Activated Sludge Model (ASM) methodology. The model predicts plant mass and water uptake rate, BOD 5 and total nitrogen (TN) removal on a year round basis...

In order to make assessments in understanding of physiological and genotoxic effects of imposing cadmium (Cd) on photosynthetic pigment contents along with the changes occurring in genetic material of Kalanchoe plants were used in relation to various Cd-treatments. Young plantlets were originated...

Denitrifying polyphosphate accumulating organisms (DNPAOs) are very promising for simultaneous nitrogen and phosphorus removal. While during denitrification, emission of a greenhouse gas, nitrous oxide (N 2O), may occur. In this study, DNPAOs were enriched in a lab-scale reactor, and N 2O emission...

The Mediterranean region is predicted to be highly impacted by climate change and the availability of water resources is expected to decrease. This study aims to assess the potential impact of climate change in an aquifer located in Northeastern Greece, for the period 2041-2070. For this, climate...

Wastewater from various types of industries such as synthetic resins, plywood industries, paper and pulp, gas and coke oven plants, paints, coal gas, tanning, textile, plastic, rubber, pharmaceutical, petroleum and mine discharges, contain different types of phenols. Phenolic compounds are toxic...

A high efficient nitrite based double-sludge system combining sequential denitrification and nitritation reactors has been developed to remove nitrogen from wastewaters containing high concentrations of ammonium. System performance was examined and also nitrous oxide (N 2O) emission was measured...

In this work, the effectiveness of electro-Fenton process degradation of sodium dodecylbenzene sulfonate (SDBS) anionic surfactant in acidic wastewater was investigated. Taguchi method was applied to study the effect of process parameters on oxidation of SDBS pollutant. An orthogonal array L 9...

Water contamination by heavy metals is a serious global problem due to increased environmental and health-related issues. In this study, we have comparatively investigated the heavy metal concentrations and mineral nutrient levels in Karasu river sediments and in plants samples of Phragmites...