From this study, green seaweed Caulerpa Scalpelliformis is utilized as a sorbent for the removal of three metals such as lead (Pb), nickel (Ni) and zinc (Zn). Adsorption tests showed that maximum removal efficiency of 75.02% for Pb, 80% for Ni and 91.11% for Zn was obtained at an optimal equilibrium...

As an important resource for the IT sector and due to the extremely hazardous elements it contains and the low recycling rate, e-plastic waste management and recycling are growing swiftly. E-plastic waste utilization reduces aggregate costs, landfill costs and energy prices. Rapid population growth...

Excessive consumption of natural resources for concrete production results in the diminution of conventional resources, leading to the scarcity of construction materials. Perhaps, the dumping of construction wastes increases the municipal wastes ensuing in disposal problems. The dumped construction...

Clean water and its requirement are one of the emerging needs in recent days. Water pollution creates more amount of toxic nature to the clean water and it increases the accumulation of poisonous contaminants in the water sources. Heavy metal ions are the type of toxic pollutant released from...

In this work, copper oxides (CuO) and zinc oxide (ZnO) nanoparticles were synthesized using Abelmoschus esculentus (A. esculentus) leaves extract by hydrothermal method and subsequently employed for degrading recalcitrant pesticide imidacloprid (IMI). The CuO and ZnO nanoparticles were characterized...

In this study, an attempt is made to understand the effectiveness on initial treatment of coconut shell on the strength of concrete. The coconut shell materials obtained from the agricultural wastes are used as a replacement for coarse aggregate in conventional concrete. From the particle size...

Water, a scarce resource that is necessary for the survival of all life on Earth and also for economic, environmental sustainability, and social progress, is becoming increasingly difficult to come by. Recent research analysis revealed that reflector, absorber, and evaporator were the three distinct...

The construction industry looks over the material alternatives whereby the conventionally materials can be replaced. The conventionally materials like fine aggregate, cement, as well as coarse aggregate. The replacements for the conventional materials are wider but the waste products and its by...

In this study, neem leaf biosorbent, prepared through chemical synthesis and activated with concentrated sulfuric acid, was utilized as an organic adsorbent for the removal of heavy metal ions, specifically arsenic (As) and chromium (Cr), from wastewater. The characteristics of the biosorbent were...

Floods are one of the leading causes of damage, prompting mortality and substantial destruction to the structure and total economy of the affected nations. Remote sensing, satellite imagery, global positioning system, and geographic information system (GIS) are widely employed for flood...

In this study, a batch adsorption process was conducted utilizing Ascophyllum Nodosum biosorbent as an organic adsorbent used for the elimination of heavy metal ions (specifically chromium, nickel, and zinc) from wastewater. To examine the surface morphology and functional groups, the biosorbent...

.In this work, biomass from Ligustrum lucidum fruits (LF) was used for the first time as a novel adsorbent to remove the Methylene Blue dye (MB) from aqueous solutions. The adsorption equilibrium was attained after 60 min, and the adsorption followed the pseudo-second-order kinetic model. The rise...

Chromium (VI), a ubiquitous toxin, has been associated with several human cancer types as well as immunologic, cardiovascular, developmental, neurological, and endocrine disorders. The present study investigated the selective adsorption capacity and chromium (VI) removal ability of jackfruit leaf...

By using a hybrid solar mineral water production setup to turn sea water into mineral water, this research intends to provide a comprehensive solution to the human need for drinking water. Before feeding seawater into the solar still, it also applies the proper pretreatment. In order to increase the...

This study aimed to explore the effect of pure oxygen aeration on the generation of soluble microbial products (SMP) when activated sludge was under toxic stress condition of phenol. Two parallel sequencing batch reactors, one with air and the other with pure oxygen aeration, were used to...

Flood management is the act of determining the frequency, magnitude, and duration of flood episodes based on the elements of a river basin that may be monitored. Floods endanger human lives and inflict significant property damage. It is essential for creating suitable flood risk management plans...

Wastewater treatment plants (WWTPs) consume large amounts of energy and thus cause an increase in carbon footprint. For this reason, it has become important not only to meet the discharge criteria in treatment plants, but also to reduce the carbon footprint resulting from treatment processes and...

The research work's main objective is to correctly examine and find out the proper hydro-geochemistry of groundwater during the dry and wet seasons and hence evaluate it’s quality in India, Tamil Nadu state's Thirukkazhukundram Block. Data from two seasons-the "Pre-monsoon" in August 2016 and the...

Bioplastics made from renewable resources, such as contemporary biomass, have been developed more quickly as a result of global pollution from plastics made from petroleum, but it is still unclear how these materials will affect ecosystems. A common biopolymer that will make up 33% of the...

Chlorella microbial fuel cells may be an alternative technology for wastewater treatment. Using microalgae and activated sludge as raw materials, a C-MFCs was established, and the effects of different nitrogen and phosphorus ratios in the influent on the electrochemical performance of C-MFCs and the...

Recently, there has been a rise in research based on data-driven based machine learning models to address the issue of processing speed posed by various physiological simulations. The majority of studies, however, have concentrated on creating models for particular water sources, drainage systems...

Green sand moulding uses silica sand for metal casting. Silica sand mining and delivery to foundries destroy the ecosystem, making metal casting unsustainable. Due to increased sand-casting output and massive civil buildings in India, the silica sand supply is declining. The depletion and shortage...

This paper deals with new fractional models to follow the performance of dam water reverse osmosis (DWRO) desalination system using the dimensionless cumulative volume of alimentation, permeate and rejection. The experimental data consist of 2561 points taken during 4 years of the lifetime of 66...

One of the biggest environmental issues has been the use and disposal of traditional fossil-based plastic, which is not biodegradable and uses a lot of energy in its production. Poly lactic acid (PLA) has received a lot of attention as an environmentally friendly substitute due to the fact that it...