In the present work, the potential of cumnium cyminum as an effective bio adsorbent for the removal of cationic dye (Red 95) was investigated. Batch adsorption experiments were carried out to investigate the effects of adsorbent dosage, pH and contact time with initial dye concentration on...

In this study, activated sugar beet pulp as a biosorbent was used to remove Red-254 dye from aqueous solutions. The contact time, pH, biosorbent dosage and temperature were chosen as the parameters affecting the biosorption process. In the experiments, the batch adsorption technique was used. The...

The locally available tamarind fruit shells (TFS) pre-treated with 1N H3PO4 was used to remove the hexavalent chromium (Cr6+) from aqueous phase. The investigation was done by using continuously mixed batch reactor (CMBR) under room temperature. Few preliminary investigations was undertaken to...

In the present investigation, marine biomass (Posidonia Oceanica) (PO), in both its unmodified PO and basic-modified (Na-PO) forms, was studied for its possible utilisation as a cheap biosorbent for the retention of amoxicillin (AMX). Biosorption studies were carried out in a batch system and the...

In this study, an investigation was carried out in order to determine the potential of ordered mesoporous carbon including high ratio sucrose in its composition as a CO2 adsorbent. Structural characterizations of silica and carbon material were determined by using a scanning electron microscope (SEM...

This paper describes the adsorption of Al3+ ions from aqueous solutions, by natural clay (from Sakarya's Yenigün district) and coconut shell modified by means of acid treatment. Batch experiments were carried out to determine the effect of various factors such as initial pH (4-9), temperature (20...

In this study activated carbon is produced from areca plant leaves, an agricultural waste material. The physical and chemical structural characterisation of the prepared carbon was carried out by FTIR, TGA and XRD analysis. FTIR study showed the presence of several functional groups, such as C=O, C...

Methylene blue is one of the most widely used dyes in various industries such as textiles and dyeing which, due to toxicity, causes several environmental problems as well as difficulties in wastewater treatment process. Therefore, many studies have been carried out on the removal of the dye from...

In this research, the Ag2CO3-PANI composite was synthesized with a simple precipitation method and then used as an effective adsorbent for adsorption of Methylene Blue cationic dyes from aqueous solution. Characterization of the adsorbent was carried out using UV–visible diffuse reflectance...

In this study, the potential use of Azolla filiculoides Lam. for the bioremediative solution to polycyclic aromatic hydrocarbon (PAH) pollution due to crude oil spills in freshwater was investigated. The plants were grown in nitrogen-free Hoagland nutrient solution media containing 0.05%, 0.1%, 0.2%...

The composite media, Zeliac TM was developed with the initial aim to provide low cost adsorbent with promising adsorption capacity. This study was conducted to investigate the removal of UV absorbance at 254 nm (UV 254) in Kerian river water using Zeliac TM as the media. Batch experiments study was...

In the present study, adsorption potential of potassium permanganate (Hypermangan) modified zeolite was investigated for the removal of nitrate from synthetic wastewater. Effects of the most significant parameters (pH, adsorbent dose, nitrate concentration and contact time) were initially evaluated...

The present study investigates the ability of formaldehyde treated Simarouba glauca seed shell powder for removal of methylene blue (MB) from aqueous solutions. Batch adsorption studies were carried out under various experimental conditions such as agitation time, dye concentration, adsorbent dose...

Cerium oxide (CeO 2) nanoparticles (NPs) were used for the removal of cadmium (II), lead (II) and chromium (VI) ions in single aqueous solutions and in solutions with mixtures of the three metals. The adsorption studies were carried out at pH 5 and 7 using a systematic factorial experimental design...

This work investigated the potential of calcined electrocoagulation sludge (CES) within metals hydroxide generated during removal of boron using Al electrode for adsorption of fluoride from aqueous solution. The effects of contact time, pH of the solution (2-10), stirrer speed (50-450 rpm), initial...

One of major limitations in getting unbiased and balanced approach towards current climate change problem is inadequate participation of scientists from developing countries in IPCC assessment process. Current shortcomings in involving an adequate number of scientists from developing countries and...

The present study has successfully explored the use of pomegranate seed de-oiled cake as a major additive and micronutrients solution as a minor additive to enhance production of biogas and enrich its methane content, using mango peel as the initial substrate. While micronutrients solution has...

In this study, the removal of a cationic dye, basic red 18, used in the textile industry with montmorillonite was investigated as a function of initial dye concentration, pH, agitation speed, adsorbent dosage, ionic strength, and temperature. Adsorption process was attained to the equilibrium within...

This work is aimed at evaluating the potentiality of adding a rhamnolipid biosurfactant in a petroleum-bearing soil. For this purpose, dehydrogenase activity and seed germination (Lactuca sativa) testes were performed before the biodegradation assays with different concentrations of rhamnolipid (1...

A pilot-plant study was carried out with the water supply to Athens water works filtered through a granular activated carbon (GAC) filter- adsorber. The objective of this study was to evaluate the performance of GAC for the removal from drinking water of the two main groups of disinfection by...

Sorption of toxic metal ions (Ni2+, Cu2+ and Cd2+) from Hevea brasiliensis bark carbon (HBBC) was carried out at 30±1 °C under various experimental conditions. Effect of various process parameters has been investigated by following the batch adsorption technique at 30 +1°C. The percentage removal...

The purpose of this study was to investigate the potential use of Para wood particle wastes and cement for producing the cement composite as a new environmental friendly construction material. Strength and durability of cement composites mixed with different mix proportions of Para wood particles...