This paper aims to investigate students’ awareness regarding the factors that affect the environmental quality in university classrooms. For this purpose a questionnaire survey was conducted, in which 314 undergraduate students of the School of Primary Education, Aristotle University of Thessaloniki...

This paper studies the characteristics of the heat waves that were observed in Athens, Greece since 1951. A heat wave is detected when two temperature criteria are fulfilled at the city centre: the daily maximum temperature value is at least 37 oC and the daily average temperature value is at least...

The urban planning, the buildings and covering materials of all surfaces, the distance between adjacent constructions, the height and the orientation of the buildings are some of the factors which affect the sustainable conditions in the city. This paper presents a project that aims at investigating...

In this work, three samples of nitrogen-doped TiO 2 prepared at different calcination temperatures (400, 450 and 500 °C) were applied for the adsorption of Direct Black 38. Kinetic studies about the adsorption of Direct Black 38 on nitrogen-doped TiO 2 were performed under different initial dye...

Iron and steel industry generates substantial amount of inorganic solid wastes namely blast furnace (BF), Linz-Donawitz (LD) slag from the metallurgical process and fly ash from thermal power plant which creates environmental pollution when dumped in open land. In this investigation, BF and LD slag...

Trends in pan evaporation (E pan) and temperature were identified through the Mann-Kendall test over Jaisalmer to probe the existence of evaporation paradox in arid environments of Thar Desert, northwest India. We also analyzed trends in rainfall, relative humidity, wind speed, and sunshine duration...

A set of experiments have been carried out in a heavy duty single cylinder engine using high EGR rates and different start of injection angles ( SOI). Three different fuels (conventional diesel fuel, a diesel-ethanol mixture (e-diesel) and a Fischer-Tropsch fuel (GTL)) have been tested in order to...

In the present study, batch adsorption studies were performed for the removal of malachite green and acid blue 161 dyes from aqueous solutions by varying parameters such as contact time, waste marble dust amount, initial dye concentration and temperature. The equilibrium adsorption data were...

The purpose of the present study is to investigate the single and joint effect of zinc and copper to the growth pattern of the metal tolerant species of Arthrobacter sp. JM018. The results showed that, both, Zn and Cu at concentrations between 1 to 10 μM stimulated the growth of the above...

In this paper the influence of key meteorological variables in Penman evaporation method was explored. Monthly data over a 16-years period (1993-2008)were used from Thissio-Athens meteorological station. The climatic parameters of surface air temperature, relative humidity, wind speed and sunshine...

The structure of the wind turbines nowadays is a critical element due to their importance from the reliability, availability, safety, and cost points of view. This is more relevant when the offshore wind turbine is considered. This paper introduces a novel design of a Fault Detection and Diagnosis...

This study was aimed to investigate the use of Mustard stalk as a cheap, eco-friendly adsorbent with support matrix for the immobilization of microbial cell and for subsequent removal of 2,4-dichlrophenol(2,4-DCP) from waste water. A comparative batch study between adsorption as well as simultaneous...

This paper presents an experimental application of PID control to study the electrocoagulation process of textile wastewater. The addition of NaCl solution would also lead to the decrease in power consumption because of the increase in conductivity. Conductivity in electrocoagulation process is...

In this paper, the effects of the mixing ratio and particle size of coal were investigated using a thermogravimetric analysis (TGA). A method of Achar-Brindley-Sharp-Wendworth (ABSW) was applied to a simultaneous calculation of the kinetic parameters (including the apparent activation energy, the...

The removal of mercury by adsorption process using fly ash was investigated in this study. Mercury removal capacity of fly ash was performed by batch mode adsorption experiment with the effect of various parameters i.e., contact time (0.5-3.5) h, pH of 2-10, concentration of adsorbate (1, 5 and 10)...

The Douro River lower basin water quality was studied regarding its concentration on 18 trace elements (Be, Al, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Ag, Cd, Sb, Ba, Tl, Pb and U, measured by ICP-MS). Other physicochemical parameters, such as pH, conductivity, dissolved oxygen and water temperature...

Physicochemical parameters and nutrient loads of major rivers and streams in Abakaliki, Ebonyi State were studied for a period of seven (7) months from May to November, 2011. Regular and constant monitoring of water bodies is vital to ensure that water quality characteristics are maintained. The...

This study focuses on the estimation of thermal comfort conditions in a high alt. site (1455 m) in Apodotia (MA), Greece, by using the MLP neural network model. This estimation is based on the air temperature (t) and relative humidity (f) data of the middle (1078-1163 m) and of the low altitude...

The estimation of evapotranspiration is essential in water resources management. Among a group of methods, the Penman–Monteith has been commonly applied to calculate reference evapotranspiration as this method has been also recommended by the Food and Agriculture Organization of the U.N. (FAO)...

This paper is focussed on the study of the air movement and temperature distribution inside refrigerating compartment of household frost-free refrigerators. It is well known that the correct air circulation and temperature distribution inside the refrigerated chamber are two of the most important...

A study of the pyrolysis and gasification of biomass residues such as oil palm shells and fibers, coffee shells, sugarcane bagasse and beech wood is presented. All of them are abundant agroindustrial biomass residues in Latin American countries. The characterization of the raw materials and products...

The effect of different operational parameters in UV/TiO2 process, such as initial dye concentration (20-50 mg l-1), light intensity (8-45 W m-2), pH (2.83-10.22), hydrogen peroxide concentration (100-500 mg l-1), temperature (21-45 ˚C) and photocatalyst concentration (150-900 mg l-1) were...

In this study, the removal of a cationic dye, basic red 18, used in the textile industry with montmorillonite was investigated as a function of initial dye concentration, pH, agitation speed, adsorbent dosage, ionic strength, and temperature. Adsorption process was attained to the equilibrium within...

The wastewater generated by the textile industry is rated as the most polluting among all industrial sectors considering both volumes discharged and effluent composition. Present investigation intended for COD and color removal from textile wastewater using naturally prepared coagulants i.e. Surjana...

The aim of this paper is to present in a useful and understandable way how climatic change could be interpreted for tourism and recreation. Future climate change conditions are analyzed using the Climate Version of the Local Model (CLM) based on the COSMO model, which is currently used – among other...