Removal of Co(II) ions from aqueous solutions using chitosan-vanillin (polymer I) and chitosan-ortho-vanillin (polymer II) adsorbents has been investigated under different experimental conditions. The effect of pH, contact time, adsorbent mass, temperature, and initial concentration of studied ion...

Mesophilic biomass and thermophilic biomass samples were isolated and used to remove Dorasyn Red dye from aqueous solutions. The biosorption kinetics of dye uptake by four different types of biomass at three temperatures (20, 30, and 40 °C) were investigated using pseudo-first order kinetics, pseudo...

The removal of Lead (II) from aqueous solutions using Fagopyrum esculentum Moench (Buckwheat) and Bambusa vulgaris (common bamboo) as adsorbents was investigated. The effects of various experimental parameters such as initial concentration, contact time and pH have been studied using batch...

The Pharmaceutical contaminants specialist antibiotics into environment can create problems for both human health and environment. Ciprofloxacin (CIP), an antibiotic Fluoroquinolones group, has recently been used widely for infections treatment. The main purpose of the research was to develop a Full...

In this study, raw boron enrichment waste was treated with hydrochloric acid and ultrasound at 35-kHz frequency for 60 minutes. To optimize the adsorption conditions for removal of methylene blue (MB) from synthetic wastewaters using raw boron enrichment waste (BEW), acid modified boron enrichment...

Clay of the Middle Atlas Mountains region, Morocco, was used to investigate the removal of heavy metals ions (Cadmium and Copper) from aqueous solutions with respect to several experimental conditions including pH, contact time, initial solute concentrations, temperature and ionic strength. Kinetic...

In this study, dehydrated cottonseed cake as a low-cost and abundant byproduct in Turkey was utilized as an adsorbent for the decolorization of Reactive Blue 19 (RB19) and Reactive Yellow 145 (RY145) from aqueous solutions based on adsorption and ultrasound-assisted adsorption (UAA). Decolorization...

This study was conducted to remove Methylene Blue (MB) from aqueous solution using activated carbon prepared from N. microphyllum (AC-NM) as a new, cheap, and non-toxic. Design of experiments based on Response Surface Methodology (RSM) conducted to investigate the effect of variables namely; initial...

The biosorption of Cr (III), Zn (II) and Ni (II) ions from aqueous solution by dead blue algal biomass (Cyanophyta) was investigated in single metal system and batch conditions. Experimental parameters included contact time (0-140 min), pH (2-8), sorbent dose (0.1-2.0 g), initial concentrations (10...

Response surface methodology has been used to design experiments and to optimize the effect of independent variables responsible for higher adsorption of humic substances by activated carbon supported nanoscale zero-valent iron from aqueous solutions. The variables of initial concentration, time, pH...

This study describes the removal of Cr (VI) ions from aqueous solutions using silver oxide/sawdust nanocomposite (Ag2O/SD NC) that was prepared using the chemical precipitation method. Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR)...

Being used in large quantities for some decades, antibiotics have been of little notice since their existence in the environment. Present study aims at investigating the optimization of Ciprofloxacin removal (CIP) in Thermally Activated Persulfate (TAP)/Aeration systems by Central Composite Design...

The purpose of this study was to investigate the adsorption properties of locally available sepiolite and clinoptilolite materials as adsorbents for the removal of crystal violet and congo red dye ions from aqueous solution. Previous experiments have revealed that two variables, concentration and...

Removal of Mo(VI) from aqueous solutions by using bentonite and powdered cockle shell was conducted in this research. First, the effects of pH and initial Mo(VI) concentration on the Mo removal efficiency via shell and bentonite were studied. Results showed that Mo removal effectiveness increased as...

In this study, potential of okra leaves for the removal of Ni(II), Cu(II), Pb(II) and Cd(II) from the mixed metal aqueous solution were evaluated. The data were analyzed by Freundlich, Langmuir, D-R, Flory-Huggins and Halsey adsorption models. Pseudo first order rate, Pseudo second order rate...

Hexavalent chromium Cr(VI) is one of the most toxic heavy metals in aqueous solutions, hence it is highly imperative to treat the wastewater containing Cr(VI) before its discharge. At present work, the rate of biosorption was studied under a variety of conditions, including initial Cr(VI)...

In last decades the search for new low cost sorbents that have heavy metal ions binding capabilities is a hot topic in the field of clean-up technologies. In this study, wastes of Romanian silver tree ( Abies alba) bark were explored for first time as green and economical sorbent for the removal of...

The decomposition of sodium dodecylbenzene sulfonate (SDBS), which is a dangerous and anionic surfactant, was investigated by the electro/Fe 2+/persulfate process from aqueous solutions. The activation of persulfate anion and production of active radicals were performed by means of heat, UV and iron...

In this study, nanocomposite of ceria sawdust (CeO 2/SD) synthesized by precipitation method was utilized for removal of As (III) ions from aqueous solutions. Study of the process was done in column system. Characterization of the nano sized adsorbent particles was carried out using XRD and SEM...

The aim of the present study was to synthesize a sorbent, for arsenic removal from aqueous solutions, reusing two waste materials (slag and red mud). The sorbent was prepared after chemical and thermal treatment, during which amorphous silica sol and FeOOH sol were produced simultaneously and form...

In this study, the removal of cadmium by using pumice coated with iron nanoparticles (INPs) from synthetic wastewater was investigated. The effects of parameters influencing adsorption: contact time (10-20 min), pH (3-9), initial cadmium concentration (25-125 mg l -1) and adsorbent dose (2-10 g l -1...

This study is focused on degradation of Direct Black dye, a common azo dye, catalyzed by nickel hydroxide in aqueous solution. Nickel sulfatehexahydrate, sodium hydroxide and sodium hypochlorite were used for synthesis of nickel hydroxide catalyst. The catalytic performance of nickel hydroxide for...

10 mg l -1 and the permeate flux behavior during dead-end stirred-cell filtration system using six type of commercially available loose and tight NF membranes (NP010, NP030, NF90, NF270, CK3001 and DS-5DK). The rejection of CIPRO and permeate flux value were evaluated according to the effects of...

The photocatalytic activity of Mn doped TiO 2 for the ozonation of tetradifon pesticide in aqueous solution was studied. Various loadings of catalysts Mn/TiO 2 (1%, 2.5% and 5%) was prepared and characterized by standard analytical techniques. Photocatalyzed ozonation with 2.5% Mn/TiO 2 yielded 100%...

Wastewater from various types of industries such as synthetic resins, plywood industries, paper and pulp, gas and coke oven plants, paints, coal gas, tanning, textile, plastic, rubber, pharmaceutical, petroleum and mine discharges, contain different types of phenols. Phenolic compounds are toxic...