This study was conducted to investigate the effect of different types of organic wastes (grass and newspaper wastes, cow dung and their combination) on physicochemical properties during vermicomposting using Eisenia fetida. Three set-ups were conducted in which three experiments were for composting...

Wastewater from textile industry is considered one of the major environmental challenges due to the large volume of highly colored, polluted and toxic effluent. This study investigated the treatability of real textile wastewater by pilot-scale anoxic-aerobic Membrane Bioreactor (MBR) system without...

The purpose of this paper is the presentation of the results compiled from self weighing of household food waste and self filling of waste collection diaries that took place in Greece. A diary was compiled and given to 101 urban households in various areas of the country. The participants were asked...

Municipal solid waste (MSW) landfills are one of the major and most preferred waste management options in the United States and many other countries across the globe. The waste in conventional MSW landfills undergoes very slow decomposition due to limited amount of moisture. In this regard, the...

Two identical four air-cathode single chamber membrane-less microbial fuel cells were stacked and tested under in series and in parallel electrical configurations. Fermentable household waste extract (FORBI; 0.8 g COD/L) was used as substrate, in all cases. Linear Sweep Voltammetry (LSV) was carried...

The textile industry has an important place in the environmental pollution due to its heavy water consumption and to the toxic content of dye. Every succeeding day, the water quality is deteriorated because the wastewater containing the dye is supplied to the receiving medium. In this study, The...

This paper presents the results of an experimental study carried out in field-scale test cells in order to determine the effect of aeration and leachate recirculation on waste decomposition rate, solid waste characteristics, landfill gas composition and settlement in the landfill body. Four landfill...

The part of industrial ecology known as industrial symbiosis engages traditionally separate industries in a collective approach to competitive advantage involving physical exchange of materials, energy, water and by-products (Dounavis et al. 2015, Dounavis et al. 2016, Ravindran and Jaiswal 2016...

The objective of this work was to determine the composition and production rate of cytostatic pharmaceutical waste produced by Theagenion Cancer Treatment Hospital (TCTH) in Thessaloniki, Greece. This information is necessary for the design and costing of management systems for cytostatic...

In this study activated carbon is produced from areca plant leaves, an agricultural waste material. The physical and chemical structural characterisation of the prepared carbon was carried out by FTIR, TGA and XRD analysis. FTIR study showed the presence of several functional groups, such as C=O, C...

The fastest growing waste stream of waste electric and electronic equipment (WEEE) is not only a threat to our environment, but is also creating a supply risk of certain rare earth metals (REMs) and critical metals (CMs). Despite the fact that Directive 2012/19/EU encourages the prevention of WEEE...

In this study, the application of Sn/Sb/Ni-Ti electrodes for the treatment of waste streams were investigated which is promising for ozone production by electrolysis of water because of their stability and high potential for ozone evolution reaction. These series of anodes have a high...

The circular economy approach represents a strategy to optimize product lifecycles, thus improving the sustainability of consumption patterns. In the European Union a recent legislative proposal has addressed this concept by promoting waste prevention and re-use as well as extensive recovery of...

In recent years, n-hexadecane, a component of diesel petroleum hydrocarbons, is frequently detected as the contaminant in many soils and water resources. The main aims of this study were focused on the feasibility of using the biodegradation for the removal of n-hexadecane from the soil-slurry...

The growing expectations of the population and the increasingly stringent regulations about air pollution have resulted in the need to minimize and conveniently treat the waste gas from different emission sources. The emissions from a large variety of plants, including waste and wastewater treatment...

Metals are essential elements in the modern technology as they are widely used for several industrial applications such as the manufacturing of electronic devices. Besides common metals, such as copper, iron and aluminium, electronic appliances can contain precious metals as well as metals defined...

Odours are among the main causes of complaints in regards to environmental issues for a variety of plants, including landfills. The emissions from landfills can affect the quality of life and negatively influence the area nearby. To protect people living in the surroundings from excessive odour...

The recovery of rare earth metals (REMs) from end-of-life products, such as Waste Electrical and Electronic Equipment (WEEE), is drawing great attention as an attractive strategy for promoting the sustainable development. The hydrometallurgical technique of solvent extraction has been reported to be...

Due to the pressing necessity of switching to alternative sources of energy, fuel cells (FC) for household applications have emerged as an alternative for decentralized energy supply. Despite the advancement on technological developments, concerns on the availability of critical raw materials...

Re-Tek UK and its partners, Enscape Consulting and the University of West of Scotland commenced trials for the collection and recovery of critical raw materials from waste electrical and electronic (WEEE) products in July 2016. Sponsored by the EU LIFE funded project ‘Critical Raw Material Closed...

The present study systematically and comprehensively reviewed different aspects of treating Acid Mine Drainage (AMD) with active treatment and waste materials. The work also critically reviews the status and the factors associated with the treatment process. Although, conventional active methods are...

WEEE is a fast-growing waste stream that includes potentially hazardous substances, but also valuable secondary raw materials, which can be recovered by adequate recycling and recovery treatment. In the last years, the research interest has moved from the conventional recycling (recovery of ferrous...

This study investigates the usability of sewage sludge, waste from a waste water treatment facility, at the stable thermophilic temperature and different pH conditions in the biohydrogen production by dark fermentation. Without the addition of a pure hydrogen producer and nutrient source, the effect...

Biomining is the common term used to define processes that utilize biological systems to facilitate the extraction of metals from ores. Nowadays, a biomining concept can be defined as a two stage combined biological systems (1st stage bioleaching and 2nd stage biosorption) in order to perform the...

The purpose of this research is to identify and characterize the poorly investigated problem of heavy metal contamination originating from World War I and II mass graves. Chemical elements pass systematically into the soil from metal weapons, buttons, badges, and other objects. As a result, the soil...