The purpose of the study was to improve drinking water quality of conventional treatment processes by combining with UF-membrane systems. Performances of two membrane systems were evaluated in two different full-scale conventional water treatment plants in Istanbul. Low-pressure UF membranes were...

One of the fundamental carotenoid compounds available in microalga Chlorella pyrenoidosa is lutein, which is a commercially valuable antioxidant compound. The extraction of lutein from C. pyrenoidosa was studied in detail under various operating conditions. Acid pretreatment was done using 10% HCl...

The slag generated in the rotary furnaces is classified hazardous waste. In this regard, landfill disposal of lead smelting slag is not feasible since a few hundred tons are produced per year; leaching of heavy metals into ground water is of concern. The release of heavy metals into the environment...

In this study, it was studied various advanced oxidation treatment processes; Fenton, UV/H2O2, UV/O3/H2O2 for treatability of hospital wastewaters containing antibiotics (cephalosporines). Taguchi’s L25 orthogonal array design was applied to design of advanced oxidation processes, for simplification...

Herein, we describe the batch and fixed-bed column adsorption of Cu2+ and Pb2+ by raw and treated date palm leaves (DP) and orange peel (OP) waste biomass. Contact time, pH, adsorbent dose, and particle size were optimized in batch adsorption experiments, while breakthrough curves obtained in fixed...

The objective of this study is to summarize studies and investigations and show a brief details of different technologies used for the treatment of petroleum wastewater. The wastewater from Petroleum industries and refineries mainly contains oil, organic matter and other compounds. The treatment of...

The aim of this study is to investigate the performance of solar photo-Fenton process (H2O2/Fe2+/Solar) to treat petroleum wastewater from Sohar oil Refinery, Oman. The effect of operating conditions such as pH, reaction time, Fenton ratio, and Fenton reagent concentrations are investigated. The...

This study describes the removal of Cr (VI) ions from aqueous solutions using silver oxide/sawdust nanocomposite (Ag2O/SD NC) that was prepared using the chemical precipitation method. Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR)...

The objective of this study is to summarize studies and investigations about advanced oxidation processes (AOPs) used for the treatment of petroleum wastewater, which mainly contained oil, organic matter and other compounds. The big difference was shown in the specification of wastewater among the...

Being used in large quantities for some decades, antibiotics have been of little notice since their existence in the environment. Present study aims at investigating the optimization of Ciprofloxacin removal (CIP) in Thermally Activated Persulfate (TAP)/Aeration systems by Central Composite Design...

Salinity is a key environmental factor for the successful application of anammox technology in wastewater treatment, because it impacts the activity and the community structure of anammox bacteria. In this study, the changes in activity and population shifts of an anammox system response to the...

In this study, different organic loading rates (OLRs) ranging from 1.1 to 5.0 kg COD/m3·day were used to assess the performance of an anaerobic reactor at the optimum mesophilic (35°C) and thermophilic (55°C) temperatures. The methane gas production rate of the thermophilic treatment was higher than...

The purpose of this study was to investigate the adsorption properties of locally available sepiolite and clinoptilolite materials as adsorbents for the removal of crystal violet and congo red dye ions from aqueous solution. Previous experiments have revealed that two variables, concentration and...

Chemical precipitation is a suitable method for the recovery and removal of ammonium in water and a fertilizer known as MAP (magnesium ammonium phosphate; MgNH4PO4.6H2O; struvite) is obtained. Additionally, the advantage of this method is that environmental conditions do not have any effect compared...

Removal of Mo(VI) from aqueous solutions by using bentonite and powdered cockle shell was conducted in this research. First, the effects of pH and initial Mo(VI) concentration on the Mo removal efficiency via shell and bentonite were studied. Results showed that Mo removal effectiveness increased as...

In this study, potential of okra leaves for the removal of Ni(II), Cu(II), Pb(II) and Cd(II) from the mixed metal aqueous solution were evaluated. The data were analyzed by Freundlich, Langmuir, D-R, Flory-Huggins and Halsey adsorption models. Pseudo first order rate, Pseudo second order rate...

Hexavalent chromium Cr(VI) is one of the most toxic heavy metals in aqueous solutions, hence it is highly imperative to treat the wastewater containing Cr(VI) before its discharge. At present work, the rate of biosorption was studied under a variety of conditions, including initial Cr(VI)...

Increasing demand for water from agriculture, industrial and domestic sectors, resulted in stress on the water resources both from quantity and quality perspectives. Due to urbanization many of the dyeing units have shifted from urban to nearby rural areas. Here safe disposal of untreated effluent...

In present work, a novel supported bucky paper (BP) membrane was fabricated and evaluated for humic acid (HA) removal from water. For better understanding the effect of operating variables, response surface methodology (RSM) was also applied. Three independent parameters namely TOC concentration (5...

The present study aims to evaluate RV-5R and RBO-3R decolourizing potential of Bacillus sp. DT9 isolated from textile effluent in Denizli (Turkey). In present study, maximum dye-decolourizing efficiency of the culture was achieved at 25 mg l -1 concentration of RV-5R and 500 mg l -1 concentration of...

The present study was conducted to compare the performance of different solar photocatalytic processes (TiO 2 photocatalysis, photo-Fenton, photo-Fenton coupled with TiO 2 photocatalysis, and photo-Fenton coupled with TiO 2/ZnO photocatalysis) for the treatment of petroleum wastewater. The removal...

This paper presents new and explicit equations to estimate aeration-related parameters such as standard oxygen requirement, daily energy consumption and total mass transfer coefficient for the diffused aeration. The proposed formulations are derived for the steady-state completely mixed activated...

The wastewater produced by the galvanoplasty industry is a serious environmental problem due to the high concentrations of heavy metals. In this study polymers were used in ionic flocculation to treat synthetic wastewater containing metals, applying four types of polyacrylamides with different ionic...

Application of nano particle in the treatment of municipal solid waste leachate is of recent interest. In this paper, the effectiveness of silica nano particles synthesized from blast furnace slag and iron nano particle synthesized from chemicals was studied for the removal of organic pollutants and...

In last decades the search for new low cost sorbents that have heavy metal ions binding capabilities is a hot topic in the field of clean-up technologies. In this study, wastes of Romanian silver tree ( Abies alba) bark were explored for first time as green and economical sorbent for the removal of...