In the present study, adsorption potential of potassium permanganate (Hypermangan) modified zeolite was investigated for the removal of nitrate from synthetic wastewater. Effects of the most significant parameters (pH, adsorbent dose, nitrate concentration and contact time) were initially evaluated...

The aim of the present study was to synthesize a sorbent, for arsenic removal from aqueous solutions, reusing two waste materials (slag and red mud). The sorbent was prepared after chemical and thermal treatment, during which amorphous silica sol and FeOOH sol were produced simultaneously and form...

The combined ultrasonic assisted/nanoparticle based procedure was described for an economical and rapid removal of meso-tetrakis (4-sulfonatophenyl) porphyrin (TSPP) by copper nanowires loaded on activated carbon (Cu-NW-AC). The synthesized Cu-NW-AC was investigated by scanning electron microscopy...

The present study investigates the ability of formaldehyde treated Simarouba glauca seed shell powder for removal of methylene blue (MB) from aqueous solutions. Batch adsorption studies were carried out under various experimental conditions such as agitation time, dye concentration, adsorbent dose...

This study presents an evaluation of diatomite as a low cost adsorbent for Pb (II) removal from aqueous solutions under various conditions. The results demonstrate that adsorption of Pb (II) is strongly dependent on the pH of the solution. The effect of pH on adsorption of Pb (II) on diatomite was...

This work investigated the potential of calcined electrocoagulation sludge (CES) within metals hydroxide generated during removal of boron using Al electrode for adsorption of fluoride from aqueous solution. The effects of contact time, pH of the solution (2-10), stirrer speed (50-450 rpm), initial...

In this work, three samples of nitrogen-doped TiO 2 prepared at different calcination temperatures (400, 450 and 500 °C) were applied for the adsorption of Direct Black 38. Kinetic studies about the adsorption of Direct Black 38 on nitrogen-doped TiO 2 were performed under different initial dye...

The removal of mercury by adsorption process using fly ash was investigated in this study. Mercury removal capacity of fly ash was performed by batch mode adsorption experiment with the effect of various parameters i.e., contact time (0.5-3.5) h, pH of 2-10, concentration of adsorbate (1, 5 and 10)...

Laboratory studies reported earlier, have shown very promising results in the selective removal of dyes from aqueous solutions by a commercially available (super absorbent polymer) SAP, Jalshakti® (JS). JS is mesoporous in nature and is a potential adsorbent for the basic dyes studied. This paper...

The efficacy of low cost adsorbing materials for removal of 2,4-D (2,4 dichloro phenoxy acetic acid) and atrazine (2-chloro-4-ethyamino-6-isopropylamino-1,3,5 triazine) herbicides from drinking water was evaluated. Five low cost adsorbents, viz. wood charcoal, rubber granules, bottom ash, macro...

Water hyacinth Eichhornia crassipes was found to have biosorption capacity for cationic dyes, malachite green and methylene blue from aqueous solutions. To evaluate the biosorption capacity and characteristics, the effect of solution pH, initial dye concentration, temperature, dose of biosorbent...

The removal of dyes from colored effluents, particularly from textile industries, is one of the major environmental concerns these days. Current methods for removing dyes from wastewaters are costly and cannot effectively be used to treat wide range of such wastewaters. This work describes the use...

Sorption of toxic metal ions (Ni2+, Cu2+ and Cd2+) from Hevea brasiliensis bark carbon (HBBC) was carried out at 30±1 °C under various experimental conditions. Effect of various process parameters has been investigated by following the batch adsorption technique at 30 +1°C. The percentage removal...

The important advantage of zeolite applied to water treatment is its high porosity when comparing to other minerals. The porosity results in good hydrodynamic properties (the increase in the pressure loss on the zeolite filters is 1.5-2.0 times smaller than in the case of sand filters) and...