Wastewater from textile industry is considered one of the major environmental challenges due to the large volume of highly colored, polluted and toxic effluent. This study investigated the treatability of real textile wastewater by pilot-scale anoxic-aerobic Membrane Bioreactor (MBR) system without...

Contaminants of emerging concern (CECs), such as pharmaceuticals and personal care products (PPCPs) and as endocrine disrupting compounds, have recently recognized as the next set of pollutants due to their toxic effects on human health and aquatic organisms at very low concentrations. One of...

Photo-Fenton for decreasing concentration of Pb(II) ions in the aqueous solution is systematically studied. The photo-Fenton process was carried out by batch technique, under UV light. The influences of process operating parameters were evaluated. The results of the research demonstrated that by...

This study investigated optimum operating conditions of supercritical water oxidation (SCWO) for octol and compared the degradation of its components TNT (2,4,6-trinitrotoluene) and HMX (octahydro-1,3,5,7- tetranitro-1,3,5,7-tetrazocine, octogen) under the same conditions. Pilot scale experiments...

The textile industry has an important place in the environmental pollution due to its heavy water consumption and to the toxic content of dye. Every succeeding day, the water quality is deteriorated because the wastewater containing the dye is supplied to the receiving medium. In this study, The...

Methylene blue is one of the most widely used dyes in various industries such as textiles and dyeing which, due to toxicity, causes several environmental problems as well as difficulties in wastewater treatment process. Therefore, many studies have been carried out on the removal of the dye from...

A simulated wetland experiment was used to investigate the effect of cadmium (Cd) on the growth of Arundo donax, as well as its photosynthetic characteristics and antioxidant enzyme activities. Cd accumulation in the order of stem < roots < leaves increased gradually with increasing Cd...

Tannery industries provoke the conspicuous quantity of deleterious effluent which has to be treated prior to discharge into the environment. Pre-treatment of tannery wastewater with aluminium sulphate is well known over decades, but due to the corrosive nature of sulphate this pre-treated water...

The present study investigated the possible effect of contact time, initial nickel concentration, and adsorbent concentration on removing Ni (II) ion, which is toxic to living organisms, from the aqueous media using nano zero valent iron (nZVI) and nano zero valent iron coated powdered activated...

The aim of this study is to investigate the performance of the solar photocatalyst of TiO2/ZnO/Fenton process to treat the refinery wastewater and remove inorganic carbon (IC) which potentially toxic to human, aquatic and microorganism life. Central composite design with response surface methodology...

The wastewater of the munitions industry varies in terms of the recalcitrant compounds depending on the products and the manufacturing process. The most commonly encountered energetic nitro-aromatic compounds in ammunition wastewater are trinitrotoluene (TNT), nitro-heterocyclic hexahydro...

This study was conducted to remove Methylene Blue (MB) from aqueous solution using activated carbon prepared from N. microphyllum (AC-NM) as a new, cheap, and non-toxic. Design of experiments based on Response Surface Methodology (RSM) conducted to investigate the effect of variables namely; initial...

The slag generated in the rotary furnaces is classified hazardous waste. In this regard, landfill disposal of lead smelting slag is not feasible since a few hundred tons are produced per year; leaching of heavy metals into ground water is of concern. The release of heavy metals into the environment...

Hexavalent chromium Cr(VI) is one of the most toxic heavy metals in aqueous solutions, hence it is highly imperative to treat the wastewater containing Cr(VI) before its discharge. At present work, the rate of biosorption was studied under a variety of conditions, including initial Cr(VI)...

In last decades the search for new low cost sorbents that have heavy metal ions binding capabilities is a hot topic in the field of clean-up technologies. In this study, wastes of Romanian silver tree ( Abies alba) bark were explored for first time as green and economical sorbent for the removal of...

MB decolarization with pure TiO 2 and Ag doped TiO 2 based photocatalytic system were investigated under UV-A and UV-Visible conditions. Different ratios of Ag were used as metal dopant. 1% Ag-TiO 2 increased the decolorization efficiencies of MB and MO dyes, also the k app constant enhanced under...

Wastewater from various types of industries such as synthetic resins, plywood industries, paper and pulp, gas and coke oven plants, paints, coal gas, tanning, textile, plastic, rubber, pharmaceutical, petroleum and mine discharges, contain different types of phenols. Phenolic compounds are toxic...

In this study, the photocatalytic degradation of two biologically treated textile finishing wastewater was investigated using powdered TiO 2 and ZnO catalysts with UV-A lamp irradiation. Photodegradation and photodecolorization of the samples real textile industrial wastewater is observed directly...

Phthalic acid esters, commonly called as phthalates, are of a common use in the industrial activities and are known with their hazardous impact on the environment and on humans such as endocrine disrupting agents, carcinogenic and toxic effects. These adverse effects have led to increasing interest...

3,4-dichloroaniline (3,4-DCA) is a hardly biodegradable and hydrolysable compound, characterized as a persistent pollutant for water, soil and sediment and highly toxic for living organisms. In this work, the impact of different micrometeorological conditions on uptake of 3,4-DCA was investigated in...

The potential of rainbow fungus (Coriolus versicolor) for bioremediation of bagasse soda pulp bleaching effluent containing chlorinated organic compounds was investigated without co-substrate addition. Initially, the effect of each of the operating variable including time, temperature, pH, and...

The final effluents from pulp and paper industry, even after biological treatment, often contain a plethora of unwanted by-products, which confer them colour and toxic characteristics. The aim of this work was to promote degradation of organic matter and remove colour by contacting fungi Pleurotus...

Phytoremediation is a low cost alternative solution to soil contamination compared with traditional removal and/or disposal techniques. One of the phytoremediation technologies is the phytovolatilization, whereby the contaminant is not primarily accumulated in above-ground tissues, but is instead...

In the present work, wood and bone ash were used to remove metal cations from solutions. Cation-removal capacity of the ashes was analyzed by potentiometric titration. It was found that the capacity of wood ash was two times higher (37.3 meq g-1) than bone ash (15.2 meq g-1). Kinetics of metal ions...

This work is aimed at evaluating the potentiality of adding a rhamnolipid biosurfactant in a petroleum-bearing soil. For this purpose, dehydrogenase activity and seed germination (Lactuca sativa) testes were performed before the biodegradation assays with different concentrations of rhamnolipid (1...