Adsorption is one of the methods that can be used for metal removal. In this study five metals were used cadmium, chromium, lead, copper and Nickel (Cd, Cr, Pb, Cu, and Ni) over a concentration range from 0.8 to about 7 mg l -1 for each metal. Adsorbents were prepared with increasing chitosan to...

MB decolarization with pure TiO 2 and Ag doped TiO 2 based photocatalytic system were investigated under UV-A and UV-Visible conditions. Different ratios of Ag were used as metal dopant. 1% Ag-TiO 2 increased the decolorization efficiencies of MB and MO dyes, also the k app constant enhanced under...

Environmental pollution caused by heavy metals from different industrial activities constitutes a serious risk for the environment. Soils contaminated with metals, such as Cu, Cd and Zn, are often subjected to physical or chemical remediation procedures to purify soils from these metals. Typical...

Current study was carried out to investigate the heavy metals removal from landfill leachate and urban wastewater by powdered activated carbon and powdered zeolite augmented SBR technique. The research was carried out in six 2000 mL breakers (working size was 1200 ml). The reactors were parted into...

Cerium oxide (CeO 2) nanoparticles (NPs) were used for the removal of cadmium (II), lead (II) and chromium (VI) ions in single aqueous solutions and in solutions with mixtures of the three metals. The adsorption studies were carried out at pH 5 and 7 using a systematic factorial experimental design...

This work investigated the potential of calcined electrocoagulation sludge (CES) within metals hydroxide generated during removal of boron using Al electrode for adsorption of fluoride from aqueous solution. The effects of contact time, pH of the solution (2-10), stirrer speed (50-450 rpm), initial...

Removal of Fe(II) and Mn(II) ions from aqueous solution by fungal biosorbent Aspergillus sp. TU-GM14immobilized on Detarium microcarpum matrix was investigated in this study. Effects of biosorption parameters pH, biosorbent concentration, bead size and equilibrium time on Fe(II) and Mn(II) ions...

Removal of Al 3+ and Mn 2+ from solution by Trichoderma asperellum BHU216 immobilized on Irvingia gabonensis matrix in a batch system was investigated. Effect of biosorption conditions contact time, pH, bead size and spore load were studied. Equilibrium isotherms and re-usability of biosorbent were...

The performance of a laboratory scale electrocoagulation system for the removal of Cr and Ni from model wastewater was studied systematically using iron and aluminum electrodes with an effective surface area of 13.8 cm2 and a distance of 4 cm. The influence of several parameters, such as initial...

The present paper aims at a treatment technique designed for special industrial wastewaters contaminated with only traces of halogenated organic compounds (HOCs) – concentrations which are nevertheless large enough to make a discharge into municipal sewage works impossible. Our research follows the...

Runoff water is an important medium transporting various air pollutants from the air to the surface water. This paper presents the results of measurement of removal rates of anions and cations in the rain, road runoff, throughfall and surface water near a major urban highway (Gdańsk beltway). The...

In the present work, wood and bone ash were used to remove metal cations from solutions. Cation-removal capacity of the ashes was analyzed by potentiometric titration. It was found that the capacity of wood ash was two times higher (37.3 meq g-1) than bone ash (15.2 meq g-1). Kinetics of metal ions...

The establishment of the Wastewater Treatment Plant of Athens is considered as the main factor contributing to the improvement of water quality and recovery of the marine ecosystem in Saronicos gulf as it removes significant percentage of pollutants entering the gulf, including heavy metals. The...

Laboratory column tests were conducted to study the efficiency of lignite fly ash barriers in removing heavy metal ions, such as Fe, Zn, Mn, Ni, Cd, Co, Al and Cu, present in high concentrations in acidic leachates produced in mining and waste disposal sites. The experimental configuration comprised...

Fly ash (FA) and fluidized bed ash (FBA) solutions were evaluated as amendments for acid-disturbed lands, more specifically for treating acidic and metal contaminated soil. While titrating the ash materials with different volumes of acid, pH changes were monitored as a function of time and the acid...

Sites co-contaminated with organic and metal pollutants are common and considered to be a more complex problem, as the two components often have a synergistic effect on cytotoxicity. This study investigated the dissipation mechnisms for pyrene in cadmium co-contaminated soil in which maize (ZEA MAYS...

Zinc oxide nanocrystals were prepared by precipitation method using ZnSO4.7H2O and NaOH as raw materials. The prepared ZnO nanocrystals were characterized by powder X-ray diffraction (XRD). Primary objective was to focus on the influence of inorganic oxidants, metal ions and anions on photocatalytic...

Various pollutants (e.g. boron and hexavalent chromium) are introduced into the aquatic environment from a variety of industrial operations causing damages to environment and affecting human health. Boron in irrigation water is of particular interest because it can have beneficial or toxic effect on...

In this article, the technical feasibility of various commercial adsorbents (activated carbon, clinoptilolite, and their mixture) for removal of Cr(total) ions from waste printing developer has been represent. Experimental tests were performed in laboratory batch mode. The adsorption data were...

The performance of electrocoagulation using iron electrodes for the removal of hexavalent chromium from synthetic aqueous solutions and actual industrial electroplating wastewater was studied. Parameters affecting the electrocoagulation process, such as initial pH, applied current density, initial...

The removal of heavy metals from wastewaters is a matter of paramount importance due to the fact that their high toxicity causes major environmental pollution problems. One of the most efficient, applicable and low cost methods for the removal of toxic metals from aqueous solutions is that of their...

The main goal of this research study was the removal of Cu(II), Ni(II) and Zn(II) from aqueous solutions using peanut hulls. This work was mainly focused on the following aspects: chemical characterization of the biosorbent, kinetic studies, study of the pH influence in mono-component systems...

Sorption of toxic metal ions (Ni2+, Cu2+ and Cd2+) from Hevea brasiliensis bark carbon (HBBC) was carried out at 30±1 °C under various experimental conditions. Effect of various process parameters has been investigated by following the batch adsorption technique at 30 +1°C. The percentage removal...

The dependence of Cd(II) and Cu(II) uptake by yeast cells on the age and temperature of cell culture was studied. Saccharomyces cerevisiae, Kluyveromyces marxianus and Debaromyces Hansenii were chosen as typical yeasts, while Cd(II) and Cu(II) as typical metal pollutants. Our results revealed that...

The stringent new regulations to lower sulfur content in fossil fuels require new economic and efficient methods for desulfurization of recalcitrant organic sulfur. Hydrodesulfurization of such compounds is very costly and requires high operating temperature and pressure. Adsorption is a non...