This paper reports on the fabrication, characterization and testing of iron oxide nanoparticles – powdered activated carbon (PAC) composites for water treatment and PAC regeneration by Fenton reactions. Different wet impregnation procedures and iron loadings were assessed in terms of organic...

Slaughterhouse wastewaters are characterized by a high organic content, mainly composed of proteins and fats. Therefore, these wastewaters should be treated efficiently prior to discharge into receiving bodies to avoid severe environmental pollution. This work aimed to characterize slaughterhouse...

The combined ultrasonic assisted/nanoparticle based procedure was described for an economical and rapid removal of meso-tetrakis (4-sulfonatophenyl) porphyrin (TSPP) by copper nanowires loaded on activated carbon (Cu-NW-AC). The synthesized Cu-NW-AC was investigated by scanning electron microscopy...

Current study was carried out to investigate the heavy metals removal from landfill leachate and urban wastewater by powdered activated carbon and powdered zeolite augmented SBR technique. The research was carried out in six 2000 mL breakers (working size was 1200 ml). The reactors were parted into...

An engine industry from Caxias do Sul city (RS, Brazil) has developed tests with biofuels to adapt their products to new fuel trends. Thus, this study aims to examine the components of their engines with potential degradation in the biodiesel usage. The most important aspects that were studied...

Landfilling has been considered as the most common method for solid waste disposal in developing countries which is faced with several issues, such as gas emission. Methane as a greenhouse gas is the main landfill gas which could be applied as a fuel for electrical power plants. In this study, the...

Phthalic acid esters, commonly called as phthalates, are of a common use in the industrial activities and are known with their hazardous impact on the environment and on humans such as endocrine disrupting agents, carcinogenic and toxic effects. These adverse effects have led to increasing interest...

Designed experiments are used to systematically examine the relationship between response variable and a set of experimental factors. In this study, 2 3 factorial design with center points was used to verify the selected experimental factors influence the removal efficiency and linearity assumption...

Simultaneous PM 10 and PM 2 .5 sampling was conducted for a six months period, at two sites of different characteristics. The first site was located in an urban background location in the North-Eastern part of GAA, affected by primary emission sources and particle transport from other parts of the...

Currently there is a big interest to increase the sources of alternative fuels for aviation to get a reduction of their carbon footprint and the deep energetic dependence from fossil fuels of different countries. Although there are studies about how to produce this alternative fuel and if it...

Tubular halloysite clay mineral and nanocrystalline TiO 2 were incorporated in the preparation of nanocomposite films on glass substrates via sol-gel method at 450ºC. The synthesis involves a simple chemical method employing nonionic surfactant molecule as pore directing agent along with the acetic...

In this study, a four-factor five-level Central Composite Design (CCD) was applied to develop mathematical model and optimize process parameters for malachite green dye (MG) removal from aqueous solutions using sepiolite. The individual, combined, and quadratic effects of four experimental factors...

Trichloroethylene (TCE) is found in all mediums of environment in varying concentrations. Over the past 25 years, many engineered systems have been devised for its complete and sustainable degradation. This study reviews the environmental factors that influence the TCE pollution in environment and...

In recent years, there has been growing concern regarding undesirable side effects of synthetic antimicrobial drugs used for food preservation or in medicine and an explosive global spreading of multidrug resistant microbes are considered as a substantial global health threat. This necessitates the...

In the present work, premixed flames from the combustion of producer gas have been analyzed. Two different compositions have been tested, corresponding to air and steam gasification processes (the latter leading to a better quality gas due to its higher CO and H2 concentration and its lower N2...

The wastewater generated by the textile industry is rated as the most polluting among all industrial sectors considering both volumes discharged and effluent composition. Present investigation intended for COD and color removal from textile wastewater using naturally prepared coagulants i.e. Surjana...

The unintended release of hydrocarbons into the environment can negatively impact human and animal health, and could further change the characteristics of soils. The aim of the present work was to investigate the rate of biodegradation at 10 and 20% diesel fuel in contaminated soil amended with 10%...

Phytoremediation is an alternative to traditional chemical and ways of treating polluted soils. The current study was carried out to investigate the phytoremediation of soil contaminated with nickel (Ni) by Lepidium sativum. Soil samples from 0 to 10 cm depth were collected. Lepidium sativum was...

In this study the vertical ozone profiles during summertime (June to August) of the MOZAIC (Measurement of Ozone and Water Vapor by Airbus in Service Aircraft) Project over the eastern Mediterranean airports of Heraklion and Rhodes in the Aegean Sea, have been analyzed in order to identify the major...

This study reports particulate matter levels of various size fractions (PM10, PM2.5, and PM1) and identify their controlling factors, in various locations over Greece. It combines long-term data sets involving particle concentrations as measured in the island of Crete in the Eastern Mediterranean...

A major solar salt works in Israel is located just north of the town of Eilat and close to the airport. This solar salt works has been in operation since 1977 and produces about 170,000 tons a year. A three-year study was initiated to examine the temporal and salinity impacts on the microbial...

The final effluents from pulp and paper industry, even after biological treatment, often contain a plethora of unwanted by-products, which confer them colour and toxic characteristics. The aim of this work was to promote degradation of organic matter and remove colour by contacting fungi Pleurotus...

The main objective of this research was to predict expected methane generation in Hellenic sanitary landfills, in order to evaluate its potential for energy production and to ensure health and safety in and around these sites on the long term. The study was performed for the period 2008 – 2028 with...

The purpose of this research was to study the chemical composition of rainwater to assess the impact of marine aerosol and anthropogenic emissions by using back air-mass trajectories. Fieldwork was done from July to November 2004, in a coastal site probably impacted by gas and oil industry in...

The present study deals with the treatment of distillery spent wash by an ultrafiltration (UF) membrane followed by reverse osmosis (RO) membrane on a pilot scale membrane setup. The performance of the system was evaluated by varying applied pressure on the thin-film composite polyamide (TFC-PA) UF...