This study investigates the adsorption kinetics and removal conditions of copper by walnut tree sawdust from synthetic solutions in the batch and fixed bed reactors. The selected experimental parameters for the batch reactor were concentration, solution pH, adsorbent amount and temperature. The...

In this study, potential of okra leaves for the removal of Ni(II), Cu(II), Pb(II) and Cd(II) from the mixed metal aqueous solution were evaluated. The data were analyzed by Freundlich, Langmuir, D-R, Flory-Huggins and Halsey adsorption models. Pseudo first order rate, Pseudo second order rate...

Low concentrations of contaminants in rainwater is the primary benefit of transforming it as an alternative source of drinking water. However, treatment is necessary as rainwater collects contaminants that are persistent in the environment such as lindane and E.coli. The combination of...

In the present study, adsorption potential of potassium permanganate (Hypermangan) modified zeolite was investigated for the removal of nitrate from synthetic wastewater. Effects of the most significant parameters (pH, adsorbent dose, nitrate concentration and contact time) were initially evaluated...

The aim of the present study was to synthesize a sorbent, for arsenic removal from aqueous solutions, reusing two waste materials (slag and red mud). The sorbent was prepared after chemical and thermal treatment, during which amorphous silica sol and FeOOH sol were produced simultaneously and form...

In this study, the removal of cadmium by using pumice coated with iron nanoparticles (INPs) from synthetic wastewater was investigated. The effects of parameters influencing adsorption: contact time (10-20 min), pH (3-9), initial cadmium concentration (25-125 mg l -1) and adsorbent dose (2-10 g l -1...

This study is focused on degradation of Direct Black dye, a common azo dye, catalyzed by nickel hydroxide in aqueous solution. Nickel sulfatehexahydrate, sodium hydroxide and sodium hypochlorite were used for synthesis of nickel hydroxide catalyst. The catalytic performance of nickel hydroxide for...

Low cost agricultural waste adsorbents can be viable alternatives to activated carbon for the treatment of contaminated wastewater. Sugarcane Bagasse, an abundant agriculture waste in Egypt, was used in the present study to prepare activated carbon. Batch adsorption experiments were conducted to...

The combined ultrasonic assisted/nanoparticle based procedure was described for an economical and rapid removal of meso-tetrakis (4-sulfonatophenyl) porphyrin (TSPP) by copper nanowires loaded on activated carbon (Cu-NW-AC). The synthesized Cu-NW-AC was investigated by scanning electron microscopy...

The present study investigates the ability of formaldehyde treated Simarouba glauca seed shell powder for removal of methylene blue (MB) from aqueous solutions. Batch adsorption studies were carried out under various experimental conditions such as agitation time, dye concentration, adsorbent dose...

This study presents an evaluation of diatomite as a low cost adsorbent for Pb (II) removal from aqueous solutions under various conditions. The results demonstrate that adsorption of Pb (II) is strongly dependent on the pH of the solution. The effect of pH on adsorption of Pb (II) on diatomite was...

Adsorption of Cu (II) ions by untreated sugarcane bagasse (USCB) and treated sugarcane bagasse (TSCB) was investigated. Sugarcane bagasse was treated with 0.1M oxalic acid prior to TSCB adsorption studies. Dependence of Cu (II) adsorption on pH, contact time, temperature and initial concentration of...

In this study, Kandira stone, extensively used as a cladding material for building stone has been examined for the removal of an antibiotic Ciprofloxacin hydrochloride (CIP) from its aqueous solution. Batch experiments were performed to investigate the adsorption kinetics, equilibrium and...

The utilization of three novel and distinct agricultural waste materials, namely casuarina fruit powder (CFP), sorghum stem powder (SSP) and banana stem powder (BSP) as low cost adsorbents for reducing chemical oxygen demand (COD) levels of coffee industry wastewater has been examined. Prepared...

In this work, three samples of nitrogen-doped TiO 2 prepared at different calcination temperatures (400, 450 and 500 °C) were applied for the adsorption of Direct Black 38. Kinetic studies about the adsorption of Direct Black 38 on nitrogen-doped TiO 2 were performed under different initial dye...

In the present study, batch adsorption studies were performed for the removal of malachite green and acid blue 161 dyes from aqueous solutions by varying parameters such as contact time, waste marble dust amount, initial dye concentration and temperature. The equilibrium adsorption data were...

The removal of mercury by adsorption process using fly ash was investigated in this study. Mercury removal capacity of fly ash was performed by batch mode adsorption experiment with the effect of various parameters i.e., contact time (0.5-3.5) h, pH of 2-10, concentration of adsorbate (1, 5 and 10)...

The purpose of the present work is to test the possibility of using the spent tea dust and raw coir pith for the removal of methylene blue (MB) from aqueous solution. The effects of the contact time, adsorbent dosage and solution pH were studied in batch experiments at 27 °C. Results showed that a...

In this study, the removal of a cationic dye, basic red 18, used in the textile industry with montmorillonite was investigated as a function of initial dye concentration, pH, agitation speed, adsorbent dosage, ionic strength, and temperature. Adsorption process was attained to the equilibrium within...

The kinetic studies on the removal of Acid Violet-17 (AV) by adsorption on various adsorbents such as fly ash (FA), iron chromium oxide (ICO), lignite coal (LC), kapok fruit shell carbon (KC) and cashew nut shell carbon (CC) have been made and the results have been compared with that of commercial...

Laboratory studies reported earlier, have shown very promising results in the selective removal of dyes from aqueous solutions by a commercially available (super absorbent polymer) SAP, Jalshakti® (JS). JS is mesoporous in nature and is a potential adsorbent for the basic dyes studied. This paper...

The soil adsorption behaviour of atrazine and its photodegradation intermediate 4,6-diamino-2-chloro-1,3,5- s-triazine (I), was evaluated by measuring partition coefficients on five representative European topsoils using classical batch experiments. From this study, (I) appears to be less...

Water hyacinth Eichhornia crassipes was found to have biosorption capacity for cationic dyes, malachite green and methylene blue from aqueous solutions. To evaluate the biosorption capacity and characteristics, the effect of solution pH, initial dye concentration, temperature, dose of biosorbent...

The adsorption of Basic yellow 2 (BY2), from aqueous solutions onto Granular activated carbon (GAC) and its adsorption kinetics at different concentrations, GAC masses, initial pH values and temperatures were studied. The adsorption process was followed by an on-line spectrophotometric analysis...

The removal of heavy metals from wastewaters is a matter of paramount importance due to the fact that their high toxicity causes major environmental pollution problems. One of the most efficient, applicable and low cost methods for the removal of toxic metals from aqueous solutions is that of their...